From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932823AbbFWMBT (ORCPT ); Tue, 23 Jun 2015 08:01:19 -0400 Received: from arroyo.ext.ti.com ([192.94.94.40]:59772 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754504AbbFWMBA (ORCPT ); Tue, 23 Jun 2015 08:01:00 -0400 From: Kishon Vijay Abraham I To: , , , , , , , , , CC: , , , , , , , Subject: [PATCH 13/17] ARM: dts: am4372: Use "syscon-phy-power" instead of "ctrl-module" in USB PHY node Date: Tue, 23 Jun 2015 17:28:58 +0530 Message-ID: <1435060743-5511-14-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1435060743-5511-1-git-send-email-kishon@ti.com> References: <1435060743-5511-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add "syscon-phy-power" property and remove the deprecated "ctrl-module" property from USB PHY device tree node. Since "am43xx_control_usb2phy1" and "am43xx_control_usb2phy2" devicetree nodes are no longer used, remove it. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/am4372.dtsi | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index c80a3e2..0754e0da 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -796,18 +796,6 @@ status = "disabled"; }; - am43xx_control_usb2phy1: control-phy@44e10620 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10620 0x4>; - reg-names = "power"; - }; - - am43xx_control_usb2phy2: control-phy@0x44e10628 { - compatible = "ti,control-phy-usb2-am437"; - reg = <0x44e10628 0x4>; - reg-names = "power"; - }; - ocp2scp0: ocp2scp@483a8000 { compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp"; #address-cells = <1>; @@ -818,7 +806,7 @@ usb2_phy1: phy@483a8000 { compatible = "ti,am437x-usb2"; reg = <0x483a8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy1>; + syscon-phy-power = <&scm_conf 0x620>; clocks = <&usb_phy0_always_on_clk32k>, <&usb_otg_ss0_refclk960m>; clock-names = "wkupclk", "refclk"; @@ -837,7 +825,7 @@ usb2_phy2: phy@483e8000 { compatible = "ti,am437x-usb2"; reg = <0x483e8000 0x8000>; - ctrl-module = <&am43xx_control_usb2phy2>; + syscon-phy-power = <&scm_conf 0x628>; clocks = <&usb_phy1_always_on_clk32k>, <&usb_otg_ss1_refclk960m>; clock-names = "wkupclk", "refclk"; -- 1.7.9.5