From: Peter Hung <hpeter@gmail.com>
To: jdelvare@suse.de, linux@roeck-us.net
Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
tom_tsai@fintek.com.tw, peter_hong@fintek.com.tw,
Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: [PATCH 1/3] hwmon:f71882fg add f81866/f71868 SuperIO support
Date: Thu, 25 Jun 2015 15:30:16 +0800 [thread overview]
Message-ID: <1435217418-26249-2-git-send-email-hpeter+linux_kernel@gmail.com> (raw)
In-Reply-To: <1435217418-26249-1-git-send-email-hpeter+linux_kernel@gmail.com>
Add New Fintek SuperIO F81866(0x1010) & F71868(0x1106)
with H/W Monitor functions.
Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
---
drivers/hwmon/f71882fg.c | 50 ++++++++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 14 deletions(-)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 2e5c6f4..10bc8b3 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -59,6 +59,8 @@
#define SIO_F71889A_ID 0x1005 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
+#define SIO_F81866_ID 0x1010 /* Chipset ID */
+#define SIO_F71868_ID 0x1106 /* Chipset ID */
#define REGION_LENGTH 8
#define ADDR_REG_OFFSET 5
@@ -101,7 +103,7 @@
#define F71882FG_REG_START 0x01
-#define F71882FG_MAX_INS 9
+#define F71882FG_MAX_INS 10
#define FAN_MIN_DETECT 366 /* Lowest detectable fanspeed */
@@ -110,7 +112,7 @@ module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg,
- f71889fg, f71889ed, f71889a, f8000, f81865f };
+ f71889fg, f71889ed, f71889a, f8000, f81865f, f81866a, f71868a };
static const char *const f71882fg_names[] = {
"f71808e",
@@ -125,21 +127,25 @@ static const char *const f71882fg_names[] = {
"f71889a",
"f8000",
"f81865f",
+ "f81866a",
+ "f71868a",
};
static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
- [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1 },
- [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1 },
- [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
- [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
- [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
- [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71808e] = { 1, 1, 1, 1, 1, 1, 0, 1, 1, 0 },
+ [f71808a] = { 1, 1, 1, 1, 0, 0, 0, 1, 1, 0 },
+ [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 },
+ [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f71889a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 0 },
+ [f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 },
+ [f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0, 0 },
+ [f81866a] = { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0 },
+ [f71868a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 },
};
static const char f71882fg_has_in1_alarm[] = {
@@ -155,6 +161,8 @@ static const char f71882fg_has_in1_alarm[] = {
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
+ [f81866a] = 1,
+ [f71868a] = 0,
};
static const char f71882fg_fan_has_beep[] = {
@@ -170,6 +178,8 @@ static const char f71882fg_fan_has_beep[] = {
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
+ [f81866a] = 1,
+ [f71868a] = 1,
};
static const char f71882fg_nr_fans[] = {
@@ -185,6 +195,8 @@ static const char f71882fg_nr_fans[] = {
[f71889a] = 3,
[f8000] = 3, /* +1 fan which is monitor only */
[f81865f] = 2,
+ [f81866a] = 3,
+ [f71868a] = 3,
};
static const char f71882fg_temp_has_beep[] = {
@@ -200,6 +212,8 @@ static const char f71882fg_temp_has_beep[] = {
[f71889a] = 1,
[f8000] = 0,
[f81865f] = 1,
+ [f81866a] = 1,
+ [f71868a] = 1,
};
static const char f71882fg_nr_temps[] = {
@@ -215,6 +229,8 @@ static const char f71882fg_nr_temps[] = {
[f71889a] = 3,
[f8000] = 3,
[f81865f] = 2,
+ [f81866a] = 3,
+ [f71868a] = 3,
};
static struct platform_device *f71882fg_pdev;
@@ -2575,6 +2591,12 @@ static int __init f71882fg_find(int sioaddr, struct f71882fg_sio_data *sio_data)
case SIO_F81865_ID:
sio_data->type = f81865f;
break;
+ case SIO_F81866_ID:
+ sio_data->type = f81866a;
+ break;
+ case SIO_F71868_ID:
+ sio_data->type = f71868a;
+ break;
default:
pr_info("Unsupported Fintek device: %04x\n",
(unsigned int)devid);
--
1.9.1
next prev parent reply other threads:[~2015-06-25 7:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-25 7:30 [PATCH 0/3] hwmon:f71882fg add new Fintek SuperIO support Peter Hung
2015-06-25 7:30 ` Peter Hung [this message]
2015-06-27 15:49 ` [PATCH 1/3] hwmon:f71882fg add f81866/f71868 " Guenter Roeck
2015-06-25 7:30 ` [PATCH 2/3] hwmon:f71882fg fix f81866a temp/beep setting Peter Hung
2015-06-25 7:30 ` [PATCH 3/3] hwmon:f71882fg fix f81866a voltage protection Peter Hung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435217418-26249-2-git-send-email-hpeter+linux_kernel@gmail.com \
--to=hpeter@gmail.com \
--cc=hpeter+linux_kernel@gmail.com \
--cc=jdelvare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=peter_hong@fintek.com.tw \
--cc=tom_tsai@fintek.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).