[PATCH v3 06/11] intel_th: Add pci glue layer for Intel Trace Hub

[Alexander Shishkin <alexander.shishkin@linux.intel.com>]

This patch adds basic support for PCI-based Intel TH devices. It requests
2 bars (configuration registers for the subdevices and STH channel MMIO
region) and calls into Intel TH core code to create the bus with subdevices
etc.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/hwtracing/intel_th/Kconfig  |  9 ++++
 drivers/hwtracing/intel_th/Makefile |  3 ++
 drivers/hwtracing/intel_th/pci.c    | 86 +++++++++++++++++++++++++++++++++++++
 3 files changed, 98 insertions(+)
 create mode 100644 drivers/hwtracing/intel_th/pci.c

diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig
index 04e32cca4b..63b6973315 100644
--- a/drivers/hwtracing/intel_th/Kconfig
+++ b/drivers/hwtracing/intel_th/Kconfig
@@ -15,6 +15,15 @@ config INTEL_TH
 
 if INTEL_TH
 
+config INTEL_TH_PCI
+	tristate "Intel Trace Hub PCI controller"
+	depends on PCI
+	help
+	  Intel Trace Hub may exist as a PCI device. This option enables
+	  support glue layer for PCI-based Intel TH.
+
+	  Say Y here to enable PCI Intel TH support.
+
 config INTEL_TH_DEBUG
 	bool "Intel Trace Hub debugging"
 	depends on DEBUG_FS
diff --git a/drivers/hwtracing/intel_th/Makefile b/drivers/hwtracing/intel_th/Makefile
index dfd7906462..5c13ed4121 100644
--- a/drivers/hwtracing/intel_th/Makefile
+++ b/drivers/hwtracing/intel_th/Makefile
@@ -1,3 +1,6 @@
 obj-$(CONFIG_INTEL_TH)		+= intel_th.o
 intel_th-y			:= core.o
 intel_th-$(CONFIG_INTEL_TH_DEBUG) += debug.o
+
+obj-$(CONFIG_INTEL_TH_PCI)	+= intel_th_pci.o
+intel_th_pci-y			:= pci.o
diff --git a/drivers/hwtracing/intel_th/pci.c b/drivers/hwtracing/intel_th/pci.c
new file mode 100644
index 0000000000..88c44b40be
--- /dev/null
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -0,0 +1,86 @@
+/*
+ * Intel Trace Hub pci driver
+ *
+ * Copyright (C) 2014-2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/pci.h>
+
+#include "intel_th.h"
+
+#define DRIVER_NAME "intel_th_pci"
+
+#define BAR_MASK (BIT(TH_MMIO_CONFIG) | BIT(TH_MMIO_SW))
+
+static int intel_th_pci_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *id)
+{
+	struct intel_th *th;
+	int err;
+
+	err = pcim_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pcim_iomap_regions_request_all(pdev, BAR_MASK, DRIVER_NAME);
+	if (err)
+		return err;
+
+	th = intel_th_alloc(&pdev->dev, pdev->resource,
+			    DEVICE_COUNT_RESOURCE, pdev->irq);
+	if (IS_ERR(th))
+		return PTR_ERR(th);
+
+	pci_set_drvdata(pdev, th);
+
+	return 0;
+}
+
+static void intel_th_pci_remove(struct pci_dev *pdev)
+{
+	struct intel_th *th = pci_get_drvdata(pdev);
+
+	intel_th_free(th);
+}
+
+static const struct pci_device_id intel_th_pci_id_table[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x9d26),
+		.driver_data = (kernel_ulong_t)0,
+	},
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa126),
+		.driver_data = (kernel_ulong_t)0,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, intel_th_pci_id_table);
+
+static struct pci_driver intel_th_pci_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= intel_th_pci_id_table,
+	.probe		= intel_th_pci_probe,
+	.remove		= intel_th_pci_remove,
+};
+
+module_pci_driver(intel_th_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Trace Hub PCI controller driver");
+MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@intel.com>");
-- 
2.1.4