public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Spencer Baugh <sbaugh@catern.com>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>,
	linux-scsi@vger.kernel.org (open list:TARGET SUBSYSTEM),
	target-devel@vger.kernel.org (open list:TARGET SUBSYSTEM),
	linux-kernel@vger.kernel.org (open list)
Cc: Joern Engel <joern@purestorage.com>,
	Spencer Baugh <Spencer.baugh@purestorage.com>,
	Alexei Potashnik <alexei@purestorage.com>,
	Spencer Baugh <sbaugh@catern.com>
Subject: [PATCH] target: fix crash in cmd tracing when cmd didn't match a LUN
Date: Tue, 21 Jul 2015 15:07:54 -0700	[thread overview]
Message-ID: <1437516477-30554-2-git-send-email-sbaugh@catern.com> (raw)

From: Alexei Potashnik <alexei@purestorage.com>

If command didn't match a LUN and we're sending check condition, the
target_cmd_complete ftrace point will crash because it assumes that
cmd->t_task_cdb has been set.

The fix will temporarily set t_task_cdb to the se_cmd buffer
and copy first 6 bytes of cdb in there as soon as possible.
At a later point t_task_cdb is reset to the correct buffer,
but until then traces and printks don't cause a crash.

Signed-off-by: Alexei Potashnik <alexei@purestorage.com>
Signed-off-by: Spencer Baugh <sbaugh@catern.com>
---
 drivers/target/target_core_device.c    | 7 +++++++
 drivers/target/target_core_transport.c | 7 ++++---
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index c4a8db6..b74dfb2 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -63,6 +63,13 @@ transport_lookup_cmd_lun(struct se_cmd *se_cmd, u64 unpacked_lun)
 	struct se_node_acl *nacl = se_sess->se_node_acl;
 	struct se_dev_entry *deve;
 
+	/* Temporarily set t_task_cdb to the se_cmd buffer and save a portion
+	 * of cdb in there (fabrics must provide at least 6 bytes). t_task_cdb
+	 * will be correctly replaced in target_setup_cmd_from_cdb. Until then
+	 * tracing and printks can access t_task_cdb without causing a crash. */
+	se_cmd->t_task_cdb = se_cmd->__t_task_cdb;
+	memcpy(se_cmd->t_task_cdb, cdb, 6);
+
 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, unpacked_lun);
 	if (deve) {
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index ce8574b..8dd15c7 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1210,15 +1210,16 @@ target_setup_cmd_from_cdb(struct se_cmd *cmd, unsigned char *cdb)
 	 * setup the pointer from __t_task_cdb to t_task_cdb.
 	 */
 	if (scsi_command_size(cdb) > sizeof(cmd->__t_task_cdb)) {
-		cmd->t_task_cdb = kzalloc(scsi_command_size(cdb),
-						GFP_KERNEL);
-		if (!cmd->t_task_cdb) {
+		unsigned char *ptr = kzalloc(scsi_command_size(cdb),
+					     GFP_KERNEL);
+		if (!ptr) {
 			pr_err("Unable to allocate cmd->t_task_cdb"
 				" %u > sizeof(cmd->__t_task_cdb): %lu ops\n",
 				scsi_command_size(cdb),
 				(unsigned long)sizeof(cmd->__t_task_cdb));
 			return TCM_OUT_OF_RESOURCES;
 		}
+		cmd->t_task_cdb = ptr;
 	} else
 		cmd->t_task_cdb = &cmd->__t_task_cdb[0];
 	/*
-- 
2.4.3


             reply	other threads:[~2015-07-21 22:08 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-21 22:07 Spencer Baugh [this message]
2015-07-21 22:13 ` [PATCH] target: fix crash in cmd tracing when cmd didn't match a LUN Spencer Baugh
  -- strict thread matches above, loose matches on Subject: below --
2015-07-23 22:19 Spencer Baugh
2015-07-24 10:52 ` Christoph Hellwig
2015-07-24 20:32   ` Nicholas A. Bellinger
2015-07-25  6:48     ` Christoph Hellwig
2015-07-25  9:28       ` Nicholas A. Bellinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437516477-30554-2-git-send-email-sbaugh@catern.com \
    --to=sbaugh@catern.com \
    --cc=Spencer.baugh@purestorage.com \
    --cc=alexei@purestorage.com \
    --cc=joern@purestorage.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox