From: Jiang Liu <jiang.liu@linux.intel.com>
To: Thomas Gleixner <tglx@linutronix.de>,
Alexander Holler <holler@ahsoftware.de>,
Mark Rustad <mark.d.rustad@intel.com>,
Alex Deucher <alexdeucher@gmail.com>,
Joerg Roedel <joro@8bytes.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>,
Tony Luck <tony.luck@intel.com>, Tejun Heo <tj@kernel.org>,
linux-kernel@vger.kernel.org, x86@kernel.org,
iommu@lists.linux-foundation.org
Subject: [Bugfix]
Date: Fri, 31 Jul 2015 00:44:40 +0800 [thread overview]
Message-ID: <1438274680-27916-1-git-send-email-jiang.liu@linux.intel.com> (raw)
Hi Alexander, Mark, Alex,
Could you please help to apply the debug patch and send me back
the dmesg? Please also help to turn kernel paramemter "apic=debug".
Hi Mark,
It seems that this regression is caused by support of multiple-MSI,
but I have no PCI card supportting multiple-MSI at hand. So may I remotely
access your system from Intel internal network? That will definitely speed
up fix.
Thanks!
Gerry
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
---
drivers/iommu/amd_iommu.c | 15 +++++++++++++--
drivers/iommu/intel_irq_remapping.c | 4 ++++
2 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index a57e9b749895..c039ed9333a4 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3916,8 +3916,8 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
union irte *irte = &data->irte_entry;
struct IO_APIC_route_entry *entry;
- data->irq_2_irte.devid = devid;
- data->irq_2_irte.index = index + sub_handle;
+ irte_info->devid = devid;
+ irte_info->index = index + sub_handle;
/* Setup IRTE for IOMMU */
irte->val = 0;
@@ -3926,6 +3926,10 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
irte->fields.destination = irq_cfg->dest_apicid;
irte->fields.dm = apic->irq_dest_mode;
irte->fields.valid = 1;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: IRTE%d vector %d APICID%d data%p cfg%p\n",
+ irte_info->index, irte->fields.vector,
+ irte->fields.destination, data, irq_cfg);
switch (info->type) {
case X86_IRQ_ALLOC_TYPE_IOAPIC:
@@ -3972,6 +3976,9 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
info->type != X86_IRQ_ALLOC_TYPE_MSIX)
return -EINVAL;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate %d MSI IRQ, VIRQ%d\n", nr_irqs, virq);
+
/*
* With IRQ remapping enabled, don't need contiguous CPU vectors
* to support multiple MSI interrupts.
@@ -3986,6 +3993,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
if (ret < 0)
return ret;
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate parent returns %d\n", ret);
ret = -ENOMEM;
data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -4005,6 +4014,8 @@ static int irq_remapping_alloc(struct irq_domain *domain, unsigned int virq,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate IRTE index %d\n", index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index f15692a410c7..bb093bc6b334 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -1234,6 +1234,8 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
MSI_ADDR_IR_SHV |
MSI_ADDR_IR_INDEX1(index) |
MSI_ADDR_IR_INDEX2(index);
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate index%d, subhandle%d, irte%llx,%llx\n", index, sub_handle, irte->high, irte->low);
break;
default:
@@ -1305,6 +1307,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain,
kfree(data);
goto out_free_parent;
}
+ if (info->type == X86_IRQ_ALLOC_TYPE_MSI)
+ pr_warn("irqdomain: allocate VIRQ%d, count%d, index%d\n", virq, nr_irqs, index);
for (i = 0; i < nr_irqs; i++) {
irq_data = irq_domain_get_irq_data(domain, virq + i);
--
1.7.10.4
next reply other threads:[~2015-07-30 16:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-30 16:44 Jiang Liu [this message]
2015-07-30 16:46 ` [Bugfix] Jiang Liu
2015-07-30 18:34 ` [Bugfix] Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438274680-27916-1-git-send-email-jiang.liu@linux.intel.com \
--to=jiang.liu@linux.intel.com \
--cc=alexdeucher@gmail.com \
--cc=holler@ahsoftware.de \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.d.rustad@intel.com \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox