From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757548AbbHDPVE (ORCPT ); Tue, 4 Aug 2015 11:21:04 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:43809 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757503AbbHDPVA (ORCPT ); Tue, 4 Aug 2015 11:21:00 -0400 From: Kishon Vijay Abraham I To: , , , , , , , CC: , Subject: [PATCH 2/7] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Date: Tue, 4 Aug 2015 20:50:41 +0530 Message-ID: <1438701646-7876-3-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1438701646-7876-1-git-send-email-kishon@ti.com> References: <1438701646-7876-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org No functional change. Previously omap_control_phy_power() was used to power off the PHY during probe. But once PIPE3 driver is adapted to use syscon, omap_control_phy_power() cannot be used. Hence used ti_pipe3_power_off to power off the PHY. Signed-off-by: Kishon Vijay Abraham I Acked-by: Roger Quadros --- drivers/phy/phy-ti-pipe3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 072d308..9782c16 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -474,8 +474,6 @@ static int ti_pipe3_probe(struct platform_device *pdev) if (ret) return ret; - omap_control_phy_power(phy->control_dev, 0); - platform_set_drvdata(pdev, phy); pm_runtime_enable(phy->dev); @@ -494,6 +492,8 @@ static int ti_pipe3_probe(struct platform_device *pdev) return PTR_ERR(generic_phy); phy_set_drvdata(generic_phy, phy); + ti_pipe3_power_off(generic_phy); + phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) -- 1.7.9.5