From: "Philip P. Moltmann" <moltmann@vmware.com>
To: gregkh@linuxfoundation.org
Cc: Xavier Deguillard <xdeguillard@vmware.com>,
dmitry.torokhov@gmail.com, linux-kernel@vger.kernel.org,
akpm@linux-foundation.org, pv-drivers@vmware.com,
"Philip P. Moltmann" <moltmann@vmware.com>
Subject: [PATCH v4 2/9] VMware balloon: Add support for balloon capabilities.
Date: Thu, 6 Aug 2015 13:33:40 -0700 [thread overview]
Message-ID: <1438893227-2230-3-git-send-email-moltmann@vmware.com> (raw)
In-Reply-To: <1438893227-2230-1-git-send-email-moltmann@vmware.com>
In-Reply-To: <20150805232613.GA22752@kroah.com>
From: Xavier Deguillard <xdeguillard@vmware.com>
In order to extend the balloon protocol, the hypervisor and the guest
driver need to agree on a set of supported functionality to use.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Philip P. Moltmann <moltmann@vmware.com>
Acked-by: Andy King <acking@vmware.com>
---
drivers/misc/vmw_balloon.c | 74 +++++++++++++++++++++++++++-------------------
1 file changed, 44 insertions(+), 30 deletions(-)
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 2799c46..ffb5634 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -46,7 +46,7 @@
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.2.0-k");
+MODULE_VERSION("1.3.0.0-k");
MODULE_ALIAS("dmi:*:svnVMware*:*");
MODULE_ALIAS("vmware_vmmemctl");
MODULE_LICENSE("GPL");
@@ -110,9 +110,18 @@ MODULE_LICENSE("GPL");
*/
#define VMW_BALLOON_HV_PORT 0x5670
#define VMW_BALLOON_HV_MAGIC 0x456c6d6f
-#define VMW_BALLOON_PROTOCOL_VERSION 2
#define VMW_BALLOON_GUEST_ID 1 /* Linux */
+enum vmwballoon_capabilities {
+ /*
+ * Bit 0 is reserved and not associated to any capability.
+ */
+ VMW_BALLOON_BASIC_CMDS = (1 << 1),
+ VMW_BALLOON_BATCHED_CMDS = (1 << 2)
+};
+
+#define VMW_BALLOON_CAPABILITIES (VMW_BALLOON_BASIC_CMDS)
+
#define VMW_BALLOON_CMD_START 0
#define VMW_BALLOON_CMD_GET_TARGET 1
#define VMW_BALLOON_CMD_LOCK 2
@@ -120,32 +129,36 @@ MODULE_LICENSE("GPL");
#define VMW_BALLOON_CMD_GUEST_ID 4
/* error codes */
-#define VMW_BALLOON_SUCCESS 0
-#define VMW_BALLOON_FAILURE -1
-#define VMW_BALLOON_ERROR_CMD_INVALID 1
-#define VMW_BALLOON_ERROR_PPN_INVALID 2
-#define VMW_BALLOON_ERROR_PPN_LOCKED 3
-#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4
-#define VMW_BALLOON_ERROR_PPN_PINNED 5
-#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6
-#define VMW_BALLOON_ERROR_RESET 7
-#define VMW_BALLOON_ERROR_BUSY 8
-
-#define VMWARE_BALLOON_CMD(cmd, data, result) \
-({ \
- unsigned long __stat, __dummy1, __dummy2; \
- __asm__ __volatile__ ("inl %%dx" : \
- "=a"(__stat), \
- "=c"(__dummy1), \
- "=d"(__dummy2), \
- "=b"(result) : \
- "0"(VMW_BALLOON_HV_MAGIC), \
- "1"(VMW_BALLOON_CMD_##cmd), \
- "2"(VMW_BALLOON_HV_PORT), \
- "3"(data) : \
- "memory"); \
- result &= -1UL; \
- __stat & -1UL; \
+#define VMW_BALLOON_SUCCESS 0
+#define VMW_BALLOON_FAILURE -1
+#define VMW_BALLOON_ERROR_CMD_INVALID 1
+#define VMW_BALLOON_ERROR_PPN_INVALID 2
+#define VMW_BALLOON_ERROR_PPN_LOCKED 3
+#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4
+#define VMW_BALLOON_ERROR_PPN_PINNED 5
+#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6
+#define VMW_BALLOON_ERROR_RESET 7
+#define VMW_BALLOON_ERROR_BUSY 8
+
+#define VMW_BALLOON_SUCCESS_WITH_CAPABILITIES (0x03000000)
+
+#define VMWARE_BALLOON_CMD(cmd, data, result) \
+({ \
+ unsigned long __status, __dummy1, __dummy2; \
+ __asm__ __volatile__ ("inl %%dx" : \
+ "=a"(__status), \
+ "=c"(__dummy1), \
+ "=d"(__dummy2), \
+ "=b"(result) : \
+ "0"(VMW_BALLOON_HV_MAGIC), \
+ "1"(VMW_BALLOON_CMD_##cmd), \
+ "2"(VMW_BALLOON_HV_PORT), \
+ "3"(data) : \
+ "memory"); \
+ if (VMW_BALLOON_CMD_##cmd == VMW_BALLOON_CMD_START) \
+ result = __dummy1; \
+ result &= -1UL; \
+ __status & -1UL; \
})
#ifdef CONFIG_DEBUG_FS
@@ -223,11 +236,12 @@ static struct vmballoon balloon;
*/
static bool vmballoon_send_start(struct vmballoon *b)
{
- unsigned long status, dummy;
+ unsigned long status, capabilities;
STATS_INC(b->stats.start);
- status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy);
+ status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_CAPABILITIES,
+ capabilities);
if (status == VMW_BALLOON_SUCCESS)
return true;
--
2.4.3
next prev parent reply other threads:[~2015-08-06 20:35 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-14 17:29 [PATCH 0/9] VMware balloon: Large page ballooning and VMCI support Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 1/9] VMware balloon: partially inline vmballoon_reserve_page Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 2/9] VMware balloon: Add support for balloon capabilities Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 3/9] VMware balloon: add batching to the vmw_balloon Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 4/9] VMware balloon: Update balloon target on each lock/unlock Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 5/9] VMware balloon: Show capabilities of balloon and resulting capabilities in the debug-fs node Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 5/9] VMware balloon: Show capabilities or " Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 6/9] VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode Philip P. Moltmann
2015-04-16 20:55 ` Dmitry Torokhov
2015-06-11 20:10 ` Philip Moltmann
2015-06-12 11:20 ` dmitry.torokhov
2015-06-12 15:06 ` Philip Moltmann
2015-06-12 15:31 ` dmitry.torokhov
2015-06-12 15:40 ` Philip Moltmann
2015-06-12 16:15 ` dmitry.torokhov
2015-06-12 18:43 ` [PATCH v3 0/9] Third revision of the performance improvment patch to the VMWare balloon driver Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 1/9] VMware balloon: partially inline vmballoon_reserve_page Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 2/9] VMware balloon: Add support for balloon capabilities Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 3/9] VMware balloon: add batching to the vmw_balloon Philip P. Moltmann
2015-08-05 20:19 ` Greg KH
2015-08-05 22:36 ` [PATCH v4 " Philip P. Moltmann
2015-08-05 22:44 ` Greg KH
2015-08-05 22:47 ` Philip Moltmann
2015-08-05 23:26 ` gregkh
2015-08-06 20:33 ` [PATCH v4 0/9] Fourth revision of the performance improvement patch to the VMware balloon driver Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 1/9] VMware balloon: partially inline vmballoon_reserve_page Philip P. Moltmann
2015-08-06 21:07 ` Greg KH
2015-08-06 22:17 ` [PATCH v5 0/7] Fifth revision of the performance improvement patch to the VMware balloon driver Philip P. Moltmann
2015-08-14 23:27 ` Philip Moltmann
2015-08-06 22:17 ` [PATCH v5 1/7] VMware balloon: add batching to the vmw_balloon Philip P. Moltmann
2015-08-06 22:17 ` [PATCH v5 2/7] VMware balloon: Update balloon target on each lock/unlock Philip P. Moltmann
2015-08-06 22:18 ` [PATCH v5 3/7] VMware balloon: Show capabilities of balloon and resulting capabilities in the debug-fs node Philip P. Moltmann
2015-08-06 22:18 ` [PATCH v5 4/7] VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode Philip P. Moltmann
2015-08-06 22:18 ` [PATCH v5 5/7] VMware balloon: Support 2m page ballooning Philip P. Moltmann
2015-08-21 14:01 ` Kamalneet Singh
2015-08-06 22:18 ` [PATCH v5 6/7] VMware balloon: Treat init like reset Philip P. Moltmann
2015-08-06 22:18 ` [PATCH v5 7/7] VMware balloon: Enable notification via VMCI Philip P. Moltmann
2015-08-06 20:33 ` Philip P. Moltmann [this message]
2015-08-06 20:33 ` [PATCH v4 3/9] VMware balloon: add batching to the vmw_balloon Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 4/9] VMware balloon: Update balloon target on each lock/unlock Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 5/9] VMware balloon: Show capabilities of balloon and resulting capabilities in the debug-fs node Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 6/9] VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 7/9] VMware balloon: Support 2m page ballooning Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 8/9] VMware balloon: Treat init like reset Philip P. Moltmann
2015-08-06 20:33 ` [PATCH v4 9/9] VMware balloon: Enable notification via VMCI Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 4/9] VMware balloon: Update balloon target on each lock/unlock Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 5/9] VMware balloon: Show capabilities of balloon and resulting capabilities in the debug-fs node Philip P. Moltmann
2015-08-05 20:14 ` Greg KH
2015-08-05 20:22 ` Philip Moltmann
2015-08-05 20:33 ` dmitry.torokhov
2015-08-05 20:42 ` John Savanyo
2015-08-05 20:50 ` gregkh
2015-08-05 21:11 ` John Savanyo
2015-08-05 20:40 ` gregkh
2015-06-12 18:43 ` [PATCH v3 6/9] VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 7/9] VMware balloon: Support 2m page ballooning Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 8/9] VMware balloon: Treat init like reset Philip P. Moltmann
2015-06-12 18:43 ` [PATCH v3 9/9] VMware balloon: Enable notification via VMCI Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 7/9] VMware balloon: Support 2m page ballooning Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 8/9] VMware balloon: Treat init like reset Philip P. Moltmann
2015-04-14 17:29 ` [PATCH 9/9] VMware balloon: Enable notification via VMCI Philip P. Moltmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438893227-2230-3-git-send-email-moltmann@vmware.com \
--to=moltmann@vmware.com \
--cc=akpm@linux-foundation.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pv-drivers@vmware.com \
--cc=xdeguillard@vmware.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox