From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: <linux-kernel@vger.kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
<dmaengine@vger.kernel.org>
Subject: [PATCH] drivers/dma: make mv_xor.c driver explicitly non-modular
Date: Fri, 21 Aug 2015 16:27:49 -0400 [thread overview]
Message-ID: <1440188869-29708-1-git-send-email-paul.gortmaker@windriver.com> (raw)
The Kconfig for this driver is currently:
config MV_XOR
bool "Marvell XOR engine support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We leave some tags like MODULE_AUTHOR for documentation purposes.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index fbaf1ead2597..9a71b42a8c9d 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -13,7 +13,6 @@
*/
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -1125,7 +1124,6 @@ static const struct of_device_id mv_xor_dt_ids[] = {
{ .compatible = "marvell,armada-380-xor", .data = (void *)XOR_MODE_IN_DESC },
{},
};
-MODULE_DEVICE_TABLE(of, mv_xor_dt_ids);
static int mv_xor_probe(struct platform_device *pdev)
{
@@ -1262,27 +1260,8 @@ err_channel_add:
return ret;
}
-static int mv_xor_remove(struct platform_device *pdev)
-{
- struct mv_xor_device *xordev = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) {
- if (xordev->channels[i])
- mv_xor_channel_remove(xordev->channels[i]);
- }
-
- if (!IS_ERR(xordev->clk)) {
- clk_disable_unprepare(xordev->clk);
- clk_put(xordev->clk);
- }
-
- return 0;
-}
-
static struct platform_driver mv_xor_driver = {
.probe = mv_xor_probe,
- .remove = mv_xor_remove,
.driver = {
.name = MV_XOR_NAME,
.of_match_table = of_match_ptr(mv_xor_dt_ids),
@@ -1294,19 +1273,10 @@ static int __init mv_xor_init(void)
{
return platform_driver_register(&mv_xor_driver);
}
-module_init(mv_xor_init);
-
-/* it's currently unsafe to unload this module */
-#if 0
-static void __exit mv_xor_exit(void)
-{
- platform_driver_unregister(&mv_xor_driver);
- return;
-}
-
-module_exit(mv_xor_exit);
-#endif
+device_initcall(mv_xor_init);
+/*
MODULE_AUTHOR("Saeed Bishara <saeed@marvell.com>");
MODULE_DESCRIPTION("DMA engine driver for Marvell's XOR engine");
MODULE_LICENSE("GPL");
+*/
--
2.2.1
next reply other threads:[~2015-08-21 20:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 20:27 Paul Gortmaker [this message]
2015-08-23 13:45 ` [PATCH] drivers/dma: make mv_xor.c driver explicitly non-modular Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440188869-29708-1-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox