From: Milo Kim <milo.kim@ti.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: Milo Kim <milo.kim@ti.com>,
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>,
<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] power:lp8727_charger: use the private data instead of updating I2C device platform data
Date: Tue, 25 Aug 2015 15:07:07 +0900 [thread overview]
Message-ID: <1440482828-7004-1-git-send-email-milo.kim@ti.com> (raw)
Currently, lp8727 charger driver parses the DT and copies values into the
'cl->dev.platform_data' if 'of_node' exists.
This may have architectural issue. Platform data is configurable through
the DT or I2C board info inside the platform area.
However, lp8727 driver changes this configuration when it is loaded.
The driver should get data from the platform side and use the private
data, 'lp8727_chg->pdata' instead of changing the original platform data.
_probe() procedure is changed as follows.
1. lp8727_parse_dt() returns the pointer of lp8727_platform_data.
The driver uses this allocated platform data. So it should keep
original platform data, 'dev->platform_data'.
2. In _probe(), check the return value of lp8727_parse_dt().
If an error is found, then exit as PTR_ERR(pdata).
3. If 'of_node' is not found, then the driver just gets the platform data
from the I2C device structure.
4. Map the platform data to private data structure.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo.kim@ti.com>
---
drivers/power/lp8727_charger.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index 7e741f1..30dc265 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -508,7 +508,7 @@ out:
return param;
}
-static int lp8727_parse_dt(struct device *dev)
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
{
struct device_node *np = dev->of_node;
struct device_node *child;
@@ -517,11 +517,11 @@ static int lp8727_parse_dt(struct device *dev)
/* If charging parameter is not defined, just skip parsing the dt */
if (of_get_child_count(np) == 0)
- goto out;
+ return NULL;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
of_property_read_u32(np, "debounce-ms", &pdata->debounce_msec);
@@ -535,29 +535,30 @@ static int lp8727_parse_dt(struct device *dev)
pdata->usb = lp8727_parse_charge_pdata(dev, child);
}
- dev->platform_data = pdata;
-out:
- return 0;
+ return pdata;
}
#else
-static int lp8727_parse_dt(struct device *dev)
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
{
- return 0;
+ return NULL;
}
#endif
static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
struct lp8727_chg *pchg;
+ struct lp8727_platform_data *pdata;
int ret;
if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
if (cl->dev.of_node) {
- ret = lp8727_parse_dt(&cl->dev);
- if (ret)
- return ret;
+ pdata = lp8727_parse_dt(&cl->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ } else {
+ pdata = dev_get_platdata(&cl->dev);
}
pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL);
@@ -566,7 +567,7 @@ static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
pchg->client = cl;
pchg->dev = &cl->dev;
- pchg->pdata = cl->dev.platform_data;
+ pchg->pdata = pdata;
i2c_set_clientdata(cl, pchg);
mutex_init(&pchg->xfer_lock);
--
1.9.1
next reply other threads:[~2015-08-25 6:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-25 6:07 Milo Kim [this message]
2015-08-25 6:07 ` [PATCH 2/2] power:lp8727_charger: parsing child node after getting debounce-ms Milo Kim
2015-09-22 13:14 ` [PATCH 1/2] power:lp8727_charger: use the private data instead of updating I2C device platform data Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1440482828-7004-1-git-send-email-milo.kim@ti.com \
--to=milo.kim@ti.com \
--cc=dbaryshkov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox