From: Adrian Hunter <adrian.hunter@intel.com>
To: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: linux-kernel@vger.kernel.org, Jiri Olsa <jolsa@redhat.com>,
Andy Lutomirski <luto@amacapital.net>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
Denys Vlasenko <dvlasenk@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@kernel.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Qiaowei Ren <qiaowei.ren@intel.com>,
"H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH V2 7/7] x86/insn: perf tools: Add new xsave instructions
Date: Wed, 2 Sep 2015 15:15:31 +0300 [thread overview]
Message-ID: <1441196131-20632-8-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1441196131-20632-1-git-send-email-adrian.hunter@intel.com>
Add xsavec, xsaves and xrstors to the op code map and the
perf tools new instructions test. To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep 'xsave\|xrst'
For information about xsavec, xsaves and xrstors, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
arch/x86/lib/x86-opcode-map.txt | 3 ++
tools/perf/tests/insn-x86-dat-32.c | 18 ++++++++++
tools/perf/tests/insn-x86-dat-64.c | 30 ++++++++++++++++
tools/perf/tests/insn-x86-dat-src.c | 42 ++++++++++++++++++++++
.../perf/util/intel-pt-decoder/x86-opcode-map.txt | 3 ++
5 files changed, 96 insertions(+)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 5a9705ed9139..d388de72eaca 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -899,6 +899,9 @@ EndTable
GrpTable: Grp9
1: CMPXCHG8B/16B Mq/Mdq
+3: xrstors
+4: xsavec
+5: xsaves
6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
7: VMPTRST Mq | VMPTRST Mq (F3) | RDSEED Rv (11B)
EndTable
diff --git a/tools/perf/tests/insn-x86-dat-32.c b/tools/perf/tests/insn-x86-dat-32.c
index 4b09b7e130a0..3b491cfe204e 100644
--- a/tools/perf/tests/insn-x86-dat-32.c
+++ b/tools/perf/tests/insn-x86-dat-32.c
@@ -636,5 +636,23 @@
"0f ae 30 \txsaveopt (%eax)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
+"0f c7 20 \txsavec (%eax)",},
+{{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f c7 25 78 56 34 12 \txsavec 0x12345678",},
+{{0x0f, 0xc7, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 a4 c8 78 56 34 12 \txsavec 0x12345678(%eax,%ecx,8)",},
+{{0x0f, 0xc7, 0x28, }, 3, 0, "", "",
+"0f c7 28 \txsaves (%eax)",},
+{{0x0f, 0xc7, 0x2d, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f c7 2d 78 56 34 12 \txsaves 0x12345678",},
+{{0x0f, 0xc7, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 ac c8 78 56 34 12 \txsaves 0x12345678(%eax,%ecx,8)",},
+{{0x0f, 0xc7, 0x18, }, 3, 0, "", "",
+"0f c7 18 \txrstors (%eax)",},
+{{0x0f, 0xc7, 0x1d, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f c7 1d 78 56 34 12 \txrstors 0x12345678",},
+{{0x0f, 0xc7, 0x9c, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 9c c8 78 56 34 12 \txrstors 0x12345678(%eax,%ecx,8)",},
{{0x66, 0x0f, 0xae, 0xf8, }, 4, 0, "", "",
"66 0f ae f8 \tpcommit ",},
diff --git a/tools/perf/tests/insn-x86-dat-64.c b/tools/perf/tests/insn-x86-dat-64.c
index 5da235a4414f..4fe7cce179c4 100644
--- a/tools/perf/tests/insn-x86-dat-64.c
+++ b/tools/perf/tests/insn-x86-dat-64.c
@@ -734,5 +734,35 @@
"41 0f ae 30 \txsaveopt (%r8)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
+"0f c7 20 \txsavec (%rax)",},
+{{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "",
+"41 0f c7 20 \txsavec (%r8)",},
+{{0x0f, 0xc7, 0x24, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 24 25 78 56 34 12 \txsavec 0x12345678",},
+{{0x0f, 0xc7, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 a4 c8 78 56 34 12 \txsavec 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0xc7, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f c7 a4 c8 78 56 34 12 \txsavec 0x12345678(%r8,%rcx,8)",},
+{{0x0f, 0xc7, 0x28, }, 3, 0, "", "",
+"0f c7 28 \txsaves (%rax)",},
+{{0x41, 0x0f, 0xc7, 0x28, }, 4, 0, "", "",
+"41 0f c7 28 \txsaves (%r8)",},
+{{0x0f, 0xc7, 0x2c, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 2c 25 78 56 34 12 \txsaves 0x12345678",},
+{{0x0f, 0xc7, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 ac c8 78 56 34 12 \txsaves 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0xc7, 0xac, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f c7 ac c8 78 56 34 12 \txsaves 0x12345678(%r8,%rcx,8)",},
+{{0x0f, 0xc7, 0x18, }, 3, 0, "", "",
+"0f c7 18 \txrstors (%rax)",},
+{{0x41, 0x0f, 0xc7, 0x18, }, 4, 0, "", "",
+"41 0f c7 18 \txrstors (%r8)",},
+{{0x0f, 0xc7, 0x1c, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 1c 25 78 56 34 12 \txrstors 0x12345678",},
+{{0x0f, 0xc7, 0x9c, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f c7 9c c8 78 56 34 12 \txrstors 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0xc7, 0x9c, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f c7 9c c8 78 56 34 12 \txrstors 0x12345678(%r8,%rcx,8)",},
{{0x66, 0x0f, 0xae, 0xf8, }, 4, 0, "", "",
"66 0f ae f8 \tpcommit ",},
diff --git a/tools/perf/tests/insn-x86-dat-src.c b/tools/perf/tests/insn-x86-dat-src.c
index 482637f44245..41b1b1c62660 100644
--- a/tools/perf/tests/insn-x86-dat-src.c
+++ b/tools/perf/tests/insn-x86-dat-src.c
@@ -445,6 +445,30 @@ int main(void)
asm volatile("xsaveopt (%r8)");
asm volatile("mfence");
+ /* xsavec mem */
+
+ asm volatile("xsavec (%rax)");
+ asm volatile("xsavec (%r8)");
+ asm volatile("xsavec (0x12345678)");
+ asm volatile("xsavec 0x12345678(%rax,%rcx,8)");
+ asm volatile("xsavec 0x12345678(%r8,%rcx,8)");
+
+ /* xsaves mem */
+
+ asm volatile("xsaves (%rax)");
+ asm volatile("xsaves (%r8)");
+ asm volatile("xsaves (0x12345678)");
+ asm volatile("xsaves 0x12345678(%rax,%rcx,8)");
+ asm volatile("xsaves 0x12345678(%r8,%rcx,8)");
+
+ /* xrstors mem */
+
+ asm volatile("xrstors (%rax)");
+ asm volatile("xrstors (%r8)");
+ asm volatile("xrstors (0x12345678)");
+ asm volatile("xrstors 0x12345678(%rax,%rcx,8)");
+ asm volatile("xrstors 0x12345678(%r8,%rcx,8)");
+
#else /* #ifdef __x86_64__ */
/* bndmk m32, bnd */
@@ -822,6 +846,24 @@ int main(void)
asm volatile("xsaveopt (%eax)");
asm volatile("mfence");
+ /* xsavec mem */
+
+ asm volatile("xsavec (%eax)");
+ asm volatile("xsavec (0x12345678)");
+ asm volatile("xsavec 0x12345678(%eax,%ecx,8)");
+
+ /* xsaves mem */
+
+ asm volatile("xsaves (%eax)");
+ asm volatile("xsaves (0x12345678)");
+ asm volatile("xsaves 0x12345678(%eax,%ecx,8)");
+
+ /* xrstors mem */
+
+ asm volatile("xrstors (%eax)");
+ asm volatile("xrstors (0x12345678)");
+ asm volatile("xrstors 0x12345678(%eax,%ecx,8)");
+
#endif /* #ifndef __x86_64__ */
/* pcommit */
diff --git a/tools/perf/util/intel-pt-decoder/x86-opcode-map.txt b/tools/perf/util/intel-pt-decoder/x86-opcode-map.txt
index 5a9705ed9139..d388de72eaca 100644
--- a/tools/perf/util/intel-pt-decoder/x86-opcode-map.txt
+++ b/tools/perf/util/intel-pt-decoder/x86-opcode-map.txt
@@ -899,6 +899,9 @@ EndTable
GrpTable: Grp9
1: CMPXCHG8B/16B Mq/Mdq
+3: xrstors
+4: xsavec
+5: xsaves
6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
7: VMPTRST Mq | VMPTRST Mq (F3) | RDSEED Rv (11B)
EndTable
--
1.9.1
next prev parent reply other threads:[~2015-09-02 12:19 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-02 12:15 [PATCH V2 0/7] x86/insn: perf tools: Add a few new x86 instructions Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 1/7] perf tools: Display build warning if x86 instruction decoder differs from kernel Adrian Hunter
2015-09-03 15:50 ` 平松雅巳 / HIRAMATU，MASAMI
2015-09-08 14:36 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 2/7] perf tools: Add a test for decoding of new x86 instructions Adrian Hunter
2015-09-08 14:36 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 3/7] x86/insn: perf tools: Pedantically tweak opcode map for MPX instructions Adrian Hunter
2015-09-03 16:01 ` 平松雅巳 / HIRAMATU，MASAMI
2015-09-08 14:36 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 4/7] x86/insn: perf tools: Add new SHA instructions Adrian Hunter
2015-09-08 14:37 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 5/7] x86/insn: perf tools: Add new memory instructions Adrian Hunter
2015-09-03 16:11 ` 平松雅巳 / HIRAMATU，MASAMI
2015-09-08 14:37 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` [PATCH V2 6/7] x86/insn: perf tools: Add new memory protection keys instructions Adrian Hunter
2015-09-03 16:00 ` 平松雅巳 / HIRAMATU，MASAMI
2015-09-08 14:37 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 12:15 ` Adrian Hunter [this message]
2015-09-03 16:21 ` [PATCH V2 7/7] x86/insn: perf tools: Add new xsave instructions 平松雅巳 / HIRAMATU，MASAMI
2015-09-08 14:38 ` [tip:perf/core] " tip-bot for Adrian Hunter
2015-09-02 19:54 ` [PATCH V2 0/7] x86/insn: perf tools: Add a few new x86 instructions Arnaldo Carvalho de Melo
2015-09-03 11:01 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1441196131-20632-8-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=acme@kernel.org \
--cc=dave.hansen@linux.intel.com \
--cc=dvlasenk@redhat.com \
--cc=hpa@zytor.com \
--cc=jolsa@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=qiaowei.ren@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox