public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <cw00.choi@samsung.com>, <lee.jones@linaro.org>
Cc: <myungjoo.ham@samsung.com>, <sameo@linux.intel.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.wolfsonmicro.com>
Subject: [PATCH 1/6] mfd: arizona: Add TST_CAP bits for headphone detection
Date: Thu, 10 Sep 2015 12:41:42 +0100	[thread overview]
Message-ID: <1441885307-24499-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)

On Florida some additional settings are required to get accurate
measurements at the top end of the headphone detection range. This patch
adds the bits required for this.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm5110-tables.c           |    2 ++
 include/linux/mfd/arizona/registers.h |    8 ++++++++
 2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/wm5110-tables.c b/drivers/mfd/wm5110-tables.c
index acb3bb2..78032e8 100644
--- a/drivers/mfd/wm5110-tables.c
+++ b/drivers/mfd/wm5110-tables.c
@@ -1908,6 +1908,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_HP1_SHORT_CIRCUIT_CTRL:
 	case ARIZONA_HP2_SHORT_CIRCUIT_CTRL:
 	case ARIZONA_HP3_SHORT_CIRCUIT_CTRL:
+	case ARIZONA_HP_TEST_CTRL_1:
 	case ARIZONA_AIF1_BCLK_CTRL:
 	case ARIZONA_AIF1_TX_PIN_CTRL:
 	case ARIZONA_AIF1_RX_PIN_CTRL:
@@ -2853,6 +2854,7 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_INPUT_ENABLES_STATUS:
 	case ARIZONA_OUTPUT_STATUS_1:
 	case ARIZONA_RAW_OUTPUT_STATUS_1:
+	case ARIZONA_HP_TEST_CTRL_1:
 	case ARIZONA_SLIMBUS_RX_PORT_STATUS:
 	case ARIZONA_SLIMBUS_TX_PORT_STATUS:
 	case ARIZONA_INTERRUPT_STATUS_1:
diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index e96644c..fe1b5d0 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -237,6 +237,7 @@
 #define ARIZONA_HP1_SHORT_CIRCUIT_CTRL           0x4A0
 #define ARIZONA_HP2_SHORT_CIRCUIT_CTRL           0x4A1
 #define ARIZONA_HP3_SHORT_CIRCUIT_CTRL           0x4A2
+#define ARIZONA_HP_TEST_CTRL_1                   0x4A4
 #define ARIZONA_SPK_CTRL_2                       0x4B5
 #define ARIZONA_SPK_CTRL_3                       0x4B6
 #define ARIZONA_DAC_COMP_1                       0x4DC
@@ -3548,6 +3549,13 @@
 #define ARIZONA_HP3_SC_ENA_WIDTH                      1  /* HP3_SC_ENA */
 
 /*
+ * R1188 (0x4A4) HP Test Ctrl 1
+ */
+#define ARIZONA_HP1_TST_CAP_SEL_MASK             0x0003  /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_SHIFT                 0  /* HP1_TST_CAP_SEL - [1:0] */
+#define ARIZONA_HP1_TST_CAP_SEL_WIDTH                 2  /* HP1_TST_CAP_SEL - [1:0] */
+
+/*
  * R1244 (0x4DC) - DAC comp 1
  */
 #define ARIZONA_OUT_COMP_COEFF_MASK              0xFFFF  /* OUT_COMP_COEFF - [15:0] */
-- 
1.7.2.5


             reply	other threads:[~2015-09-10 12:04 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-10 11:41 Charles Keepax [this message]
2015-09-10 11:41 ` [PATCH 2/6] extcon: arizona: Additional settings to improve accuracy of HP detect Charles Keepax
2015-09-11  8:16   ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 3/6] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS Charles Keepax
2015-09-11  8:05   ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 4/6] extcon: arizona: Add device binding for jack detect polarity inversion Charles Keepax
2015-09-11  8:07   ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 5/6] extcon: arizona: Add device binding for second jack detect pin on GPIO5 Charles Keepax
2015-09-11  8:07   ` Chanwoo Choi
2015-09-10 11:41 ` [PATCH 6/6] mfd: arizona: Update DT binding documentation for jack detection Charles Keepax
2015-09-11  8:09   ` Chanwoo Choi
2015-09-11  8:12 ` [PATCH 1/6] mfd: arizona: Add TST_CAP bits for headphone detection Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441885307-24499-1-git-send-email-ckeepax@opensource.wolfsonmicro.com \
    --to=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=myungjoo.ham@samsung.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox