From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1754752AbbIRV1g (ORCPT <rfc822;w@1wt.eu>);
	Fri, 18 Sep 2015 17:27:36 -0400
Received: from mail-gw3-out.broadcom.com ([216.31.210.64]:6480 "EHLO
	mail-gw3-out.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1754203AbbIRVYl (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Fri, 18 Sep 2015 17:24:41 -0400
X-IronPort-AV: E=Sophos;i="5.17,554,1437462000"; 
   d="scan'208";a="75364121"
From: Ray Jui <rjui@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>, Rob Herring <robh+dt@kernel.org>
CC: Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <bcm-kernel-feedback-list@broadcom.com>, <devicetree@vger.kernel.org>,
        "Ray Jui" <rjui@broadcom.com>
Subject: [PATCH v2 6/9] ARM: dts: Reorder Cygnus peripherals
Date: Fri, 18 Sep 2015 14:24:11 -0700
Message-ID: <1442611454-16331-7-git-send-email-rjui@broadcom.com>
X-Mailer: git-send-email 1.9.1
In-Reply-To: <1442611454-16331-1-git-send-email-rjui@broadcom.com>
References: <1442611454-16331-1-git-send-email-rjui@broadcom.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Reorder all Cygnus peripherals based on base register addresses in
bcm-cygnus.dtsi

Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 56 +++++++++++++++++++--------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 3d29b77..dfa9a3c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -108,26 +108,14 @@
 			gpio-controller;
 		};
 
-		gpio_ccm: gpio@1800a000 {
-			compatible = "brcm,cygnus-ccm-gpio";
-			reg = <0x1800a000 0x50>,
-			      <0x0301d164 0x20>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-		};
-
-		gpio_asiu: gpio@180a5000 {
-			compatible = "brcm,cygnus-asiu-gpio";
-			reg = <0x180a5000 0x668>;
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			pinmux = <&pinctrl>;
-
-			interrupt-controller;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
 		};
 
 		wdt0: wdt@18009000 {
@@ -138,14 +126,14 @@
 			clock-names = "apb_pclk";
 		};
 
-		i2c0: i2c@18008000 {
-			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-			reg = <0x18008000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-			clock-frequency = <100000>;
-			status = "disabled";
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -255,5 +243,17 @@
 
 			brcm,nand-has-wp;
 		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinmux = <&pinctrl>;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
-- 
1.9.1