[PATCH] Staging: rtl8712: rtl871x_mp_ioctl.h: Coding style warnings fix for block comments

[Punit Vara <punitvara@gmail.com>]

This patch is for the rtl871x_mp_ioctl.h that fixes up following warning
reported by checkpatch.pl:

-Block comments use a trailing */ on a separate line

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_mp_ioctl.h | 39 ++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
index 8e7c7f8..ea432ed 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_ioctl.h
@@ -158,28 +158,37 @@ static const struct oid_obj_priv oid_rtl_seg_81_80_00[] = {
 	{1, &oid_null_function},	/*0x05	OID_RT_PRO_SET_SCRAMBLER*/
 	{1, &oid_null_function},	/*0x06	OID_RT_PRO_SET_FILTER_BB*/
 	{1, &oid_null_function},	/*0x07
-					 * OID_RT_PRO_SET_MANUAL_DIVERS_BB*/
+					 * OID_RT_PRO_SET_MANUAL_DIVERS_BB
+					 */
 	{1, &oid_rt_pro_set_channel_direct_call_hdl},	/*0x08*/
 	{1, &oid_null_function},	/*0x09
-				* OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL*/
+				* OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL
+				*/
 	{1, &oid_null_function},	/*0x0A
-				* OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL*/
+				* OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL
+				*/
 	{1, &oid_rt_pro_set_continuous_tx_hdl},	/*0x0B
-				* OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL*/
+				* OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL
+				*/
 	{1, &oid_rt_pro_set_single_carrier_tx_hdl}, /*0x0C
-				* OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS*/
+				* OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS
+				*/
 	{1, &oid_null_function},	/*0x0D
-				* OID_RT_PRO_SET_TX_ANTENNA_BB*/
+				* OID_RT_PRO_SET_TX_ANTENNA_BB
+				*/
 	{1, &oid_rt_pro_set_antenna_bb_hdl},		/*0x0E*/
 	{1, &oid_null_function},	/*0x0F	OID_RT_PRO_SET_CR_SCRAMBLER*/
 	{1, &oid_null_function},	/*0x10	OID_RT_PRO_SET_CR_NEW_FILTER*/
 	{1, &oid_rt_pro_set_tx_power_control_hdl}, /*0x11
-				* OID_RT_PRO_SET_TX_POWER_CONTROL*/
+				* OID_RT_PRO_SET_TX_POWER_CONTROL
+				*/
 	{1, &oid_null_function},	/*0x12	OID_RT_PRO_SET_CR_TX_CONFIG*/
 	{1, &oid_null_function},	/*0x13
-					 * OID_RT_PRO_GET_TX_POWER_CONTROL*/
+					 * OID_RT_PRO_GET_TX_POWER_CONTROL
+					 */
 	{1, &oid_null_function},	/*0x14
-					 * OID_RT_PRO_GET_CR_SIGNAL_QUALITY*/
+					 * OID_RT_PRO_GET_CR_SIGNAL_QUALITY
+					 */
 	{1, &oid_null_function},	/*0x15	OID_RT_PRO_SET_CR_SETPOINT*/
 	{1, &oid_null_function},	/*0x16	OID_RT_PRO_SET_INTEGRATOR*/
 	{1, &oid_null_function},	/*0x17	OID_RT_PRO_SET_SIGNAL_QUALITY*/
@@ -203,13 +212,17 @@ static const struct oid_obj_priv oid_rtl_seg_81_80_20[] = {
 	{1, &oid_rt_pro_query_rx_packet_received_hdl},	/*0x26*/
 	{1, &oid_rt_pro_query_rx_packet_crc32_error_hdl},/*0x27*/
 	{1, &oid_null_function},	/*0x28
-					 *OID_RT_PRO_QUERY_CURRENT_ADDRESS*/
+					 *OID_RT_PRO_QUERY_CURRENT_ADDRESS
+					 */
 	{1, &oid_null_function},	/*0x29
-					 *OID_RT_PRO_QUERY_PERMANENT_ADDRESS*/
+					 *OID_RT_PRO_QUERY_PERMANENT_ADDRESS
+					 */
 	{1, &oid_null_function},	/*0x2A
-				 *OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS*/
+				 *OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS
+				 */
 	{1, &oid_rt_pro_set_carrier_suppression_tx_hdl},/*0x2B
-				 *OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX*/
+				 *OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX
+				 */
 	{1, &oid_null_function},	/*0x2C	OID_RT_PRO_RECEIVE_PACKET*/
 	{1, &oid_null_function},	/*0x2D	OID_RT_PRO_WRITE_EEPROM_BYTE*/
 	{1, &oid_null_function},	/*0x2E	OID_RT_PRO_READ_EEPROM_BYTE*/
-- 
2.5.2