linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Punit Vara <punitvara@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, devel@driverdev.osuosl.org,
	Julia.Lawall@lip6.fr, sudipm.mukherjee@gmail.com,
	dan.carpenter@oracle.com, linux-kernel@vger.kernel.org,
	Punit Vara <punitvara@gmail.com>
Subject: [PATCH RESEND 3/4] Staging: rtl8712: Coding style warnings fix for block comments
Date: Wed, 14 Oct 2015 23:55:54 +0530	[thread overview]
Message-ID: <1444847155-11243-4-git-send-email-punitvara@gmail.com> (raw)
In-Reply-To: <1444847155-11243-1-git-send-email-punitvara@gmail.com>

This patch is to the rtl871x_ioctl_linux.c file that fixes up following
warnings reported by checkpatch.pl :

-Block comments use * on subsequent lines
-Block comments use a trailing */ on a separate line

Signed-off-by: Punit Vara <punitvara@gmail.com>
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
index 1c9092e..fc1028a 100644
--- a/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
+++ b/drivers/staging/rtl8712/rtl871x_ioctl_linux.c
@@ -797,13 +797,13 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 	int intReturn = false;
 
 /*
-	There are the BSSID information in the bssid.sa_data array.
-	If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
-	all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
-	wpa_supplicant wants to add a PMKID/BSSID to driver.
-	If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
-	remove a PMKID/BSSID from driver.
-*/
+ *	There are the BSSID information in the bssid.sa_data array.
+ *	If cmd is IW_PMKSA_FLUSH, it means the wpa_supplicant wants to clear
+ *	all the PMKID information. If cmd is IW_PMKSA_ADD, it means the
+ *	wpa_supplicant wants to add a PMKID/BSSID to driver.
+ *	If cmd is IW_PMKSA_REMOVE, it means the wpa_supplicant wants to
+ *	remove a PMKID/BSSID from driver.
+ */
 	if (pPMK == NULL)
 		return -EINVAL;
 	memcpy(strIssueBssid, pPMK->bssid.sa_data, ETH_ALEN);
@@ -818,7 +818,8 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 			if (!memcmp(psecuritypriv->PMKIDList[j].Bssid,
 			    strIssueBssid, ETH_ALEN)) {
 				/* BSSID is matched, the same AP => rewrite
-				 * with new PMKID. */
+				 * with new PMKID.
+				 */
 				netdev_info(dev, "r8712u: %s: BSSID exists in the PMKList.\n",
 					    __func__);
 				memcpy(psecuritypriv->PMKIDList[j].PMKID,
@@ -850,7 +851,8 @@ static int r871x_wx_set_pmkid(struct net_device *dev,
 			if (!memcmp(psecuritypriv->PMKIDList[j].Bssid,
 			    strIssueBssid, ETH_ALEN)) {
 				/* BSSID is matched, the same AP => Remove
-				 * this PMKID information and reset it. */
+				 * this PMKID information and reset it.
+				 */
 				eth_zero_addr(psecuritypriv->PMKIDList[j].Bssid);
 				psecuritypriv->PMKIDList[j].bUsed = false;
 				break;
@@ -1587,7 +1589,8 @@ static int r8711_wx_set_enc(struct net_device *dev,
 	} else {
 		wep.KeyLength = 0;
 		if (keyindex_provided == 1) { /* set key_id only, no given
-					       * KeyMaterial(erq->length==0).*/
+					       * KeyMaterial(erq->length==0).
+					       */
 			padapter->securitypriv.PrivacyKeyIndex = key;
 			switch (padapter->securitypriv.DefKeylen[key]) {
 			case 5:
@@ -2240,7 +2243,8 @@ static iw_handler r8711_handlers[] = {
 	r8711_wx_set_wap,		/* SIOCSIWAP */
 	r8711_wx_get_wap,		/* SIOCGIWAP */
 	r871x_wx_set_mlme,		/* request MLME operation;
-					 *  uses struct iw_mlme */
+					 *  uses struct iw_mlme
+					 */
 	dummy,				/* SIOCGIWAPLIST -- deprecated */
 	r8711_wx_set_scan,		/* SIOCSIWSCAN */
 	r8711_wx_get_scan,		/* SIOCGIWSCAN */
-- 
2.5.3


  parent reply	other threads:[~2015-10-14 18:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-14 18:25 [PATCH RESEND 0/4] Staging: rtl8712: Fix coding style warnings Punit Vara
2015-10-14 18:25 ` [PATCH RESEND 1/4] Staging: rtl8712: Fix warning prefer eth_broadcast_addr() over memset() Punit Vara
2015-10-14 18:25 ` [PATCH v2 2/4] Staging: rtl8712: Use ether_addr_equal() over memcmp() Punit Vara
2015-10-14 18:25 ` Punit Vara [this message]
2015-10-14 18:25 ` [PATCH v2 4/4] Staging: rtl8712: fix warning for placing constant on the right side of test Punit Vara
2015-10-17  5:16   ` Greg KH
2015-10-18  6:32     ` punit vara
2015-10-18 18:54       ` Tillmann Heidsieck
2015-10-18 19:14         ` Tillmann Heidsieck
2015-10-19  2:00       ` Greg KH
2015-10-19  2:44         ` Larry Finger
2015-10-19 15:21           ` punit vara
2015-10-22 19:04             ` punit vara
2015-10-22 19:14               ` Greg KH
2015-10-22 19:22               ` Dan Carpenter
2015-10-22 20:03                 ` punit vara
2015-10-22 20:34                   ` Dan Carpenter
2015-10-24  7:11                     ` punit vara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1444847155-11243-4-git-send-email-punitvara@gmail.com \
    --to=punitvara@gmail.com \
    --cc=Julia.Lawall@lip6.fr \
    --cc=Larry.Finger@lwfinger.net \
    --cc=dan.carpenter@oracle.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sudipm.mukherjee@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).