From: Masanari Iida <standby24x7@gmail.com>
To: linux-kernel@vger.kernel.org, trivial@kernel.org, rdunlap@infradead.org
Cc: Masanari Iida <standby24x7@gmail.com>
Subject: [PATCH] [trivial] treewide: Fix typo in printk
Date: Thu, 15 Oct 2015 13:26:08 +0900 [thread overview]
Message-ID: <1444883168-30763-1-git-send-email-standby24x7@gmail.com> (raw)
This patch fix multiple spelling typos found in
various part of kernel.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
drivers/firmware/efi/libstub/fdt.c | 2 +-
drivers/infiniband/hw/cxgb4/cm.c | 2 +-
drivers/md/raid0.c | 4 ++--
drivers/media/common/saa7146/saa7146_video.c | 2 +-
drivers/media/dvb-frontends/m88ds3103.c | 2 +-
drivers/media/dvb-frontends/si2165.c | 4 ++--
drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 2 +-
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 +-
drivers/soc/ti/knav_dma.c | 2 +-
sound/drivers/pcm-indirect2.c | 2 +-
sound/usb/6fire/firmware.c | 2 +-
11 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index b62e2f5..cf7b7d4 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
sys_table->boottime->free_pool(memory_map);
new_fdt_size += EFI_PAGE_SIZE;
} else {
- pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+ pr_efi_err(sys_table, "Unable to construct new device tree.\n");
goto fail_free_mmap;
}
}
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index debc39d..9a389a0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -449,7 +449,7 @@ static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
{
struct c4iw_ep *ep = handle;
- printk(KERN_ERR MOD "ARP failure duing connect\n");
+ printk(KERN_ERR MOD "ARP failure during connect\n");
kfree_skb(skb);
connect_reply_upcall(ep, -EHOSTUNREACH);
state_set(&ep->com, DEAD);
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index f8e5db0..2ea12c6 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -549,13 +549,13 @@ static void *raid0_takeover_raid10(struct mddev *mddev)
* - all mirrors must be already degraded
*/
if (mddev->layout != ((1 << 8) + 2)) {
- printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takover layout: 0x%x\n",
+ printk(KERN_ERR "md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
mdname(mddev),
mddev->layout);
return ERR_PTR(-EINVAL);
}
if (mddev->raid_disks & 1) {
- printk(KERN_ERR "md/raid0:%s: Raid0 cannot takover Raid10 with odd disk number.\n",
+ printk(KERN_ERR "md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
index 3077949..079f520 100644
--- a/drivers/media/common/saa7146/saa7146_video.c
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -502,7 +502,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuf
/* check if overlay is running */
if (IS_OVERLAY_ACTIVE(fh) != 0) {
if (vv->video_fh != fh) {
- DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+ DEB_D("refusing to change framebuffer information while overlay is active in another open\n");
return -EBUSY;
}
}
diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c
index ff31e7a..508bb07 100644
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -664,7 +664,7 @@ static int m88ds3103_init(struct dvb_frontend *fe)
/* request the firmware, this will block and timeout */
ret = request_firmware(&fw, fw_file, &client->dev);
if (ret) {
- dev_err(&client->dev, "firmare file '%s' not found\n", fw_file);
+ dev_err(&client->dev, "firmware file '%s' not found\n", fw_file);
goto err;
}
diff --git a/drivers/media/dvb-frontends/si2165.c b/drivers/media/dvb-frontends/si2165.c
index 7c2eeee..1fcd925 100644
--- a/drivers/media/dvb-frontends/si2165.c
+++ b/drivers/media/dvb-frontends/si2165.c
@@ -511,7 +511,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
&offset, block_count);
if (ret < 0) {
dev_err(&state->i2c->dev,
- "%s: firmare could not be uploaded\n",
+ "%s: firmware could not be uploaded\n",
KBUILD_MODNAME);
goto error;
}
@@ -535,7 +535,7 @@ static int si2165_upload_firmware(struct si2165_state *state)
if (len != offset) {
dev_err(&state->i2c->dev,
- "%s: firmare len mismatch %04x != %04x\n",
+ "%s: firmware len mismatch %04x != %04x\n",
KBUILD_MODNAME, len, offset);
ret = -EINVAL;
goto error;
diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
index 511144f..c466282 100644
--- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
+++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c
@@ -387,7 +387,7 @@ static int netup_unidvb_dvb_init(struct netup_unidvb_dev *ndev,
vb2_dvb_alloc_frontend(
&ndev->frontends[num], 3) == NULL) {
dev_dbg(&ndev->pci_dev->dev,
- "%s(): unable to to alllocate vb2_dvb_frontend\n",
+ "%s(): unable to allocate vb2_dvb_frontend\n",
__func__);
return -ENOMEM;
}
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index c00e495..3b494d7 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1193,7 +1193,7 @@ static void i40evf_configure_rss_aq(struct i40e_vsi *vsi, const u8 *seed)
if (adapter->current_op != I40E_VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
- dev_err(&adapter->pdev->dev, "Cannot confiure RSS, command %d pending\n",
+ dev_err(&adapter->pdev->dev, "Cannot configure RSS, command %d pending\n",
adapter->current_op);
return;
}
diff --git a/drivers/soc/ti/knav_dma.c b/drivers/soc/ti/knav_dma.c
index bc1b80e..7517754 100644
--- a/drivers/soc/ti/knav_dma.c
+++ b/drivers/soc/ti/knav_dma.c
@@ -389,7 +389,7 @@ static int of_channel_match_helper(struct device_node *np, const char *name,
*dma_instance = dma_node->name;
index = of_property_match_string(np, "ti,navigator-dma-names", name);
if (index < 0) {
- dev_err(kdev->dev, "No 'ti,navigator-dma-names' propery\n");
+ dev_err(kdev->dev, "No 'ti,navigator-dma-names' properly\n");
return -ENODEV;
}
diff --git a/sound/drivers/pcm-indirect2.c b/sound/drivers/pcm-indirect2.c
index e73fafd..d16bc14 100644
--- a/sound/drivers/pcm-indirect2.c
+++ b/sound/drivers/pcm-indirect2.c
@@ -47,7 +47,7 @@ void snd_pcm_indirect2_stat(struct snd_pcm_substream *substream,
int seconds = (rec->lastbytetime - rec->firstbytetime) / HZ;
snd_printk(KERN_DEBUG "STAT: mul_elapsed: %u, mul_elapsed_real: %d, "
- "irq_occured: %d\n",
+ "irq_occurred: %d\n",
rec->mul_elapsed, rec->mul_elapsed_real, rec->irq_occured);
snd_printk(KERN_DEBUG "STAT: min_multiple: %d (irqs/period)\n",
rec->min_multiple);
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 62c25e7..9520b4c 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -350,7 +350,7 @@ static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
if (!memcmp(version, known_fw_versions + i, 2))
return 0;
- dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
+ dev_err(&intf->dev, "invalid firmware version in device: %4ph. "
"please reconnect to power. if this failure "
"still happens, check your firmware installation.",
version);
--
2.6.1.133.gf5b6079
next reply other threads:[~2015-10-15 4:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-15 4:26 Masanari Iida [this message]
2015-10-15 17:59 ` [PATCH] [trivial] treewide: Fix typo in printk Randy Dunlap
2015-10-16 12:14 ` [PATCH/v2] " Masanari Iida
2015-10-16 15:25 ` Randy Dunlap
-- strict thread matches above, loose matches on Subject: below --
2015-12-13 6:26 [PATCH] " Masanari Iida
2015-12-16 18:34 ` Randy Dunlap
2015-05-19 15:09 Masanari Iida
2015-05-19 21:36 ` Randy Dunlap
2014-08-28 17:26 Masanari Iida
2014-08-28 17:40 ` Geert Uytterhoeven
2014-08-28 18:00 ` Masanari Iida
2014-08-28 20:11 ` Randy Dunlap
2014-03-25 13:32 [PATCH] [trivial]treewide: " Masanari Iida
2014-03-25 14:13 ` Arend van Spriel
2014-03-25 17:04 ` Randy Dunlap
2014-01-07 12:58 [PATCH] [trivial] treewide: " Masanari Iida
2013-12-08 15:22 Masanari Iida
2013-12-08 18:46 ` Randy Dunlap
2013-09-30 14:19 [PATCH] [trivial]treewide: " Masanari Iida
2013-10-12 23:04 ` Randy Dunlap
2013-08-19 4:10 Masanari Iida
2013-08-19 16:58 ` Randy Dunlap
2013-08-19 17:06 ` Joe Perches
2013-07-15 13:50 [PATCH] [trivial] treewide: " Masanari Iida
2013-07-15 15:06 ` Randy Dunlap
2013-05-30 14:44 Masanari Iida
2013-05-30 16:55 ` Randy Dunlap
2013-05-20 15:17 [PATCH] [trivial]treewide: " Masanari Iida
2013-05-20 16:28 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444883168-30763-1-git-send-email-standby24x7@gmail.com \
--to=standby24x7@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).