From: lizf@kernel.org
To: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Jan Kara <jack@suse.com>,
"Theodore Ts'o" <tytso@mit.edu>, Zefan Li <lizefan@huawei.com>
Subject: [PATCH 3.4 62/65] jbd2: avoid infinite loop when destroying aborted journal
Date: Tue, 20 Oct 2015 08:48:12 +0800 [thread overview]
Message-ID: <1445302095-4695-62-git-send-email-lizf@kernel.org> (raw)
In-Reply-To: <1445302030-4607-1-git-send-email-lizf@kernel.org>
From: Jan Kara <jack@suse.com>
3.4.110-rc1 review patch. If anyone has any objections, please let me know.
------------------
commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.
Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.
Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li <lizefan@huawei.com>
---
fs/jbd2/checkpoint.c | 39 +++++++++++++++++++++++++++++++++------
fs/jbd2/commit.c | 2 +-
fs/jbd2/journal.c | 11 ++++++++++-
include/linux/jbd2.h | 3 ++-
4 files changed, 46 insertions(+), 9 deletions(-)
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 6bb5285..4fd7856 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -467,14 +467,14 @@ int jbd2_cleanup_journal_tail(journal_t *journal)
* journal_clean_one_cp_list
*
* Find all the written-back checkpoint buffers in the given list and
- * release them.
+ * release them. If 'destroy' is set, clean all buffers unconditionally.
*
* Called with the journal locked.
* Called with j_list_lock held.
* Returns number of buffers reaped (for debug)
*/
-static int journal_clean_one_cp_list(struct journal_head *jh, int *released)
+static int journal_clean_one_cp_list(struct journal_head *jh, int *released, bool destroy)
{
struct journal_head *last_jh;
struct journal_head *next_jh = jh;
@@ -488,7 +488,10 @@ static int journal_clean_one_cp_list(struct journal_head *jh, int *released)
do {
jh = next_jh;
next_jh = jh->b_cpnext;
- ret = __try_to_free_cp_buf(jh);
+ if (!destroy)
+ ret = __try_to_free_cp_buf(jh);
+ else
+ ret = __jbd2_journal_remove_checkpoint(jh) + 1;
if (ret) {
freed++;
if (ret == 2) {
@@ -514,12 +517,14 @@ static int journal_clean_one_cp_list(struct journal_head *jh, int *released)
*
* Find all the written-back checkpoint buffers in the journal and release them.
*
+ * If 'destroy' is set, release all buffers unconditionally.
+ *
* Called with the journal locked.
* Called with j_list_lock held.
* Returns number of buffers reaped (for debug)
*/
-int __jbd2_journal_clean_checkpoint_list(journal_t *journal)
+int __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy)
{
transaction_t *transaction, *last_transaction, *next_transaction;
int ret = 0;
@@ -535,7 +540,7 @@ int __jbd2_journal_clean_checkpoint_list(journal_t *journal)
transaction = next_transaction;
next_transaction = transaction->t_cpnext;
ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_list, &released);
+ t_checkpoint_list, &released, destroy);
/*
* This function only frees up some memory if possible so we
* dont have an obligation to finish processing. Bail out if
@@ -551,7 +556,7 @@ int __jbd2_journal_clean_checkpoint_list(journal_t *journal)
* we can possibly see not yet submitted buffers on io_list
*/
ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_io_list, &released);
+ t_checkpoint_io_list, &released, destroy);
if (need_resched())
goto out;
} while (transaction != last_transaction);
@@ -560,6 +565,28 @@ out:
}
/*
+ * Remove buffers from all checkpoint lists as journal is aborted and we just
+ * need to free memory
+ */
+void jbd2_journal_destroy_checkpoint(journal_t *journal)
+{
+ /*
+ * We loop because __jbd2_journal_clean_checkpoint_list() may abort
+ * early due to a need of rescheduling.
+ */
+ while (1) {
+ spin_lock(&journal->j_list_lock);
+ if (!journal->j_checkpoint_transactions) {
+ spin_unlock(&journal->j_list_lock);
+ break;
+ }
+ __jbd2_journal_clean_checkpoint_list(journal, true);
+ spin_unlock(&journal->j_list_lock);
+ cond_resched();
+ }
+}
+
+/*
* journal_remove_checkpoint: called after a buffer has been committed
* to disk (either by being write-back flushed to disk, or being
* committed to the log).
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index a0dcbd62..259f28d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -438,7 +438,7 @@ void jbd2_journal_commit_transaction(journal_t *journal)
* frees some memory
*/
spin_lock(&journal->j_list_lock);
- __jbd2_journal_clean_checkpoint_list(journal);
+ __jbd2_journal_clean_checkpoint_list(journal, false);
spin_unlock(&journal->j_list_lock);
jbd_debug(3, "JBD2: commit phase 1\n");
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index ad64b94..a327944 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1591,8 +1591,17 @@ int jbd2_journal_destroy(journal_t *journal)
while (journal->j_checkpoint_transactions != NULL) {
spin_unlock(&journal->j_list_lock);
mutex_lock(&journal->j_checkpoint_mutex);
- jbd2_log_do_checkpoint(journal);
+ err = jbd2_log_do_checkpoint(journal);
mutex_unlock(&journal->j_checkpoint_mutex);
+ /*
+ * If checkpointing failed, just free the buffers to avoid
+ * looping forever
+ */
+ if (err) {
+ jbd2_journal_destroy_checkpoint(journal);
+ spin_lock(&journal->j_list_lock);
+ break;
+ }
spin_lock(&journal->j_list_lock);
}
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 129bca4..2179d78 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -981,8 +981,9 @@ void jbd2_update_log_tail(journal_t *journal, tid_t tid, unsigned long block);
extern void jbd2_journal_commit_transaction(journal_t *);
/* Checkpoint list management */
-int __jbd2_journal_clean_checkpoint_list(journal_t *journal);
+int __jbd2_journal_clean_checkpoint_list(journal_t *journal, bool destroy);
int __jbd2_journal_remove_checkpoint(struct journal_head *);
+void jbd2_journal_destroy_checkpoint(journal_t *journal);
void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
--
1.9.1
next prev parent reply other threads:[~2015-10-20 0:52 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 0:47 [PATCH 3.4 00/65] 3.4.110-rc1 review lizf
2015-10-20 0:47 ` [PATCH 3.4 01/65] hrtimer: Allow concurrent hrtimer_start() for self restarting timers lizf
2015-10-20 0:47 ` [PATCH 3.4 02/65] mtd: fix: avoid race condition when accessing mtd->usecount lizf
2015-10-20 0:47 ` [PATCH 3.4 03/65] crypto: talitos - avoid memleak in talitos_alg_alloc() lizf
2015-10-20 0:47 ` [PATCH 3.4 04/65] ASoC: wm8737: Fixup setting VMID Impedance control register lizf
2015-10-20 0:47 ` [PATCH 3.4 05/65] ASoC: wm8903: Fix define for WM8903_VMID_RES_250K lizf
2015-10-20 0:47 ` [PATCH 3.4 06/65] ASoC: wm8955: Fix setting wrong register for WM8955_K_8_0_MASK bits lizf
2015-10-20 0:47 ` [PATCH 3.4 07/65] pktgen: adjust spacing in proc file interface output lizf
2015-10-20 0:47 ` [PATCH 3.4 08/65] pktgen: document ability to add same device to several threads lizf
2015-10-20 0:47 ` [PATCH 3.4 09/65] tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send lizf
2015-10-20 0:47 ` [PATCH 3.4 10/65] rndis_wlan: harmless issue calling set_bit() lizf
2015-10-20 0:47 ` [PATCH 3.4 11/65] drm/radeon: take the mode_config mutex when dealing with hpds (v2) lizf
2015-10-20 0:47 ` [PATCH 3.4 12/65] usb: dwc3: gadget: return error if command sent to DEPCMD register fails lizf
2015-10-20 0:47 ` [PATCH 3.4 13/65] rcu: Correctly handle non-empty Tiny RCU callback list with none ready lizf
2015-10-20 0:47 ` [PATCH 3.4 14/65] mtd: dc21285: use raw spinlock functions for nw_gpio_lock lizf
2015-10-20 0:47 ` [PATCH 3.4 15/65] staging: rtl8712: prevent buffer overrun in recvbuf2recvframe lizf
2015-10-20 0:47 ` [PATCH 3.4 16/65] usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset lizf
2015-10-20 0:47 ` [PATCH 3.4 17/65] fixing infinite OPEN loop in 4.0 stateid recovery lizf
[not found] ` <3B7DC48D-0D7F-4F9A-9CE0-FAC640F60199@netapp.com>
2015-10-21 8:04 ` Zefan Li
2015-10-20 0:47 ` [PATCH 3.4 18/65] NFS: Fix size of NFSACL SETACL operations lizf
2015-10-20 0:47 ` [PATCH 3.4 19/65] SUNRPC: Fix a memory leak in the backchannel code lizf
2015-10-20 0:47 ` [PATCH 3.4 20/65] ipr: Increase default adapter init stage change timeout lizf
2015-10-20 0:47 ` [PATCH 3.4 21/65] ath3k: add support of 13d3:3474 AR3012 device lizf
2015-10-20 0:47 ` [PATCH 3.4 22/65] ath9k: fix DMA stop sequence for AR9003+ lizf
2015-10-20 0:47 ` [PATCH 3.4 23/65] regulator: core: fix constraints output buffer lizf
2015-10-20 0:47 ` [PATCH 3.4 24/65] x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A lizf
2015-10-20 0:47 ` [PATCH 3.4 25/65] dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup lizf
2015-10-20 0:47 ` [PATCH 3.4 26/65] ASoC: wm8960: the enum of "DAC Polarity" should be wm8960_enum[1] lizf
2015-10-20 0:47 ` [PATCH 3.4 27/65] ext4: fix race between truncate and __ext4_journalled_writepage() lizf
2015-10-20 0:47 ` [PATCH 3.4 28/65] Disable write buffering on Toshiba ToPIC95 lizf
2015-10-20 0:47 ` [PATCH 3.4 29/65] sctp: fix ASCONF list handling lizf
2015-10-20 0:47 ` [PATCH 3.4 30/65] jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail() lizf
2015-10-20 0:47 ` [PATCH 3.4 31/65] regmap: Fix regmap_bulk_read in BE mode lizf
2015-10-20 0:47 ` [PATCH 3.4 32/65] jbd2: fix ocfs2 corrupt when updating journal superblock fails lizf
2015-10-20 0:47 ` [PATCH 3.4 33/65] ideapad: fix software rfkill setting lizf
2015-10-20 0:47 ` [PATCH 3.4 34/65] mmc: card: Fixup request missing in mmc_blk_issue_rw_rq lizf
2015-10-20 0:47 ` [PATCH 3.4 35/65] nfs: increase size of EXCHANGE_ID name string buffer lizf
2015-10-20 0:47 ` [PATCH 3.4 36/65] bridge: fix br_stp_set_bridge_priority race conditions lizf
2015-10-20 0:47 ` [PATCH 3.4 37/65] ext4: call sync_blockdev() before invalidate_bdev() in put_super() lizf
2015-10-20 0:47 ` [PATCH 3.4 38/65] packet: read num_members once in packet_rcv_fanout() lizf
2015-10-20 0:47 ` [PATCH 3.4 39/65] packet: avoid out of bounds read in round robin fanout lizf
2015-10-20 0:47 ` [PATCH 3.4 40/65] ext4: don't retry file block mapping on bigalloc fs with non-extent file lizf
2015-10-20 0:47 ` [PATCH 3.4 41/65] watchdog: omap: assert the counter being stopped before reprogramming lizf
2015-10-20 0:47 ` [PATCH 3.4 42/65] bridge: multicast: restore router configuration on port link down/up lizf
2015-10-20 0:47 ` [PATCH 3.4 43/65] stmmac: troubleshoot unexpected bits in des0 & des1 lizf
2015-10-20 0:47 ` [PATCH 3.4 44/65] mm: kmemleak: allow safe memory scanning during kmemleak disabling lizf
2015-10-20 0:47 ` [PATCH 3.4 45/65] dell-laptop: Fix allocating & freeing SMI buffer page lizf
2015-10-20 0:47 ` [PATCH 3.4 46/65] tracing/filter: Do not WARN on operand count going below zero lizf
2015-10-20 0:47 ` [PATCH 3.4 47/65] tracing/filter: Do not allow infix to exceed end of string lizf
2015-10-20 0:47 ` [PATCH 3.4 48/65] __bitmap_parselist: fix bug in empty string handling lizf
2015-10-20 0:47 ` [PATCH 3.4 49/65] agp/intel: Fix typo in needs_ilk_vtd_wa() lizf
2015-10-20 0:48 ` [PATCH 3.4 50/65] crush: fix a bug in tree bucket decode lizf
2015-10-20 0:48 ` [PATCH 3.4 51/65] fuse: initialize fc->release before calling it lizf
2015-10-20 0:48 ` [PATCH 3.4 52/65] ACPICA: Tables: Fix an issue that FACS initialization is performed twice lizf
2015-10-20 13:35 ` Moore, Robert
2015-10-21 1:24 ` Zheng, Lv
2015-10-20 0:48 ` [PATCH 3.4 53/65] KVM: x86: make vapics_in_nmi_mode atomic lizf
2015-10-20 0:48 ` [PATCH 3.4 54/65] KVM: x86: properly restore LVT0 lizf
2015-10-20 0:48 ` [PATCH 3.4 55/65] 9p: forgetting to cancel request on interrupted zero-copy RPC lizf
2015-10-20 0:48 ` [PATCH 3.4 56/65] Revert "drm/i915: Don't skip request retirement if the active list is empty" lizf
2015-10-20 0:48 ` [PATCH 3.4 57/65] Revert "drm/radeon: Use drm_calloc_ab for CS relocs" lizf
2015-10-20 0:48 ` [PATCH 3.4 58/65] drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling" lizf
2015-10-20 0:48 ` [PATCH 3.4 59/65] crypto: s390/ghash: Fix incorrect backport of a1cae34e23b1 lizf
2015-10-20 0:48 ` [PATCH 3.4 60/65] ARM: Fix incorrect backport of 0b59d8806a31 lizf
2015-10-20 0:48 ` [PATCH 3.4 61/65] usb: dwc3: Reset the transfer resource index on SET_INTERFACE lizf
2015-10-20 0:48 ` lizf [this message]
2015-10-20 0:48 ` [PATCH 3.4 63/65] IB/qib: Change lkey table allocation to support more MRs lizf
2015-10-20 0:48 ` [PATCH 3.4 64/65] dcache: Handle escaped paths in prepend_path lizf
2015-10-20 0:48 ` [PATCH 3.4 65/65] vfs: Test for and handle paths that are unreachable from their mnt_root lizf
2015-10-20 1:06 ` [PATCH 3.4 00/65] 3.4.110-rc1 review Zefan Li
2015-10-20 2:17 ` Guenter Roeck
2015-10-20 7:05 ` Geert Uytterhoeven
2015-10-20 8:23 ` Zefan Li
2015-10-20 8:59 ` Geert Uytterhoeven
2015-10-20 12:56 ` Guenter Roeck
2015-10-20 13:15 ` Guenter Roeck
2015-10-21 8:05 ` Zefan Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445302095-4695-62-git-send-email-lizf@kernel.org \
--to=lizf@kernel.org \
--cc=jack@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=stable@vger.kernel.org \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).