From: Joerg Roedel <joro@8bytes.org>
To: iommu@lists.linux-foundation.org
Cc: Alex Williamson <alex.williamson@redhat.com>,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org, Joerg Roedel <jroedel@suse.de>
Subject: [PATCH 6/8] iommu/arm-smmu: Switch to device_group call-back
Date: Wed, 21 Oct 2015 23:51:41 +0200 [thread overview]
Message-ID: <1445464303-18206-7-git-send-email-joro@8bytes.org> (raw)
In-Reply-To: <1445464303-18206-1-git-send-email-joro@8bytes.org>
From: Joerg Roedel <jroedel@suse.de>
This converts the ARM SMMU and the SMMUv3 driver to use the
new device_group call-back.
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
drivers/iommu/arm-smmu-v3.c | 1 +
drivers/iommu/arm-smmu.c | 77 +++++++++++++++++++++++++++------------------
2 files changed, 47 insertions(+), 31 deletions(-)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 286e890..e9e591c 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1902,6 +1902,7 @@ static struct iommu_ops arm_smmu_ops = {
.iova_to_phys = arm_smmu_iova_to_phys,
.add_device = arm_smmu_add_device,
.remove_device = arm_smmu_remove_device,
+ .device_group = pci_device_group,
.domain_get_attr = arm_smmu_domain_get_attr,
.domain_set_attr = arm_smmu_domain_set_attr,
.pgsize_bitmap = -1UL, /* Restricted during device attach */
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 48a39df..b4c0629 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -1292,33 +1292,25 @@ static void __arm_smmu_release_pci_iommudata(void *data)
kfree(data);
}
-static int arm_smmu_add_pci_device(struct pci_dev *pdev)
+static int arm_smmu_init_pci_device(struct pci_dev *pdev,
+ struct iommu_group *group)
{
- int i, ret;
- u16 sid;
- struct iommu_group *group;
struct arm_smmu_master_cfg *cfg;
-
- group = iommu_group_get_for_dev(&pdev->dev);
- if (IS_ERR(group))
- return PTR_ERR(group);
+ u16 sid;
+ int i;
cfg = iommu_group_get_iommudata(group);
if (!cfg) {
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg) {
- ret = -ENOMEM;
- goto out_put_group;
- }
+ if (!cfg)
+ return -ENOMEM;
iommu_group_set_iommudata(group, cfg,
__arm_smmu_release_pci_iommudata);
}
- if (cfg->num_streamids >= MAX_MASTER_STREAMIDS) {
- ret = -ENOSPC;
- goto out_put_group;
- }
+ if (cfg->num_streamids >= MAX_MASTER_STREAMIDS)
+ return -ENOSPC;
/*
* Assume Stream ID == Requester ID for now.
@@ -1334,16 +1326,13 @@ static int arm_smmu_add_pci_device(struct pci_dev *pdev)
cfg->streamids[cfg->num_streamids++] = sid;
return 0;
-out_put_group:
- iommu_group_put(group);
- return ret;
}
-static int arm_smmu_add_platform_device(struct device *dev)
+static int arm_smmu_init_platform_device(struct device *dev,
+ struct iommu_group *group)
{
- struct iommu_group *group;
- struct arm_smmu_master *master;
struct arm_smmu_device *smmu = find_smmu_for_device(dev);
+ struct arm_smmu_master *master;
if (!smmu)
return -ENODEV;
@@ -1352,21 +1341,20 @@ static int arm_smmu_add_platform_device(struct device *dev)
if (!master)
return -ENODEV;
- /* No automatic group creation for platform devices */
- group = iommu_group_alloc();
- if (IS_ERR(group))
- return PTR_ERR(group);
-
iommu_group_set_iommudata(group, &master->cfg, NULL);
- return iommu_group_add_device(group, dev);
+
+ return 0;
}
static int arm_smmu_add_device(struct device *dev)
{
- if (dev_is_pci(dev))
- return arm_smmu_add_pci_device(to_pci_dev(dev));
+ struct iommu_group *group;
- return arm_smmu_add_platform_device(dev);
+ group = iommu_group_get_for_dev(dev);
+ if (IS_ERR(group))
+ return PTR_ERR(group);
+
+ return 0;
}
static void arm_smmu_remove_device(struct device *dev)
@@ -1374,6 +1362,32 @@ static void arm_smmu_remove_device(struct device *dev)
iommu_group_remove_device(dev);
}
+static struct iommu_group *arm_smmu_device_group(struct device *dev)
+{
+ struct iommu_group *group;
+ int ret;
+
+ if (dev_is_pci(dev))
+ group = pci_device_group(dev);
+ else
+ group = generic_device_group(dev);
+
+ if (IS_ERR(group))
+ return group;
+
+ if (dev_is_pci(dev))
+ ret = arm_smmu_init_pci_device(to_pci_dev(dev), group);
+ else
+ ret = arm_smmu_init_platform_device(dev, group);
+
+ if (ret) {
+ iommu_group_put(group);
+ group = ERR_PTR(ret);
+ }
+
+ return group;
+}
+
static int arm_smmu_domain_get_attr(struct iommu_domain *domain,
enum iommu_attr attr, void *data)
{
@@ -1430,6 +1444,7 @@ static struct iommu_ops arm_smmu_ops = {
.iova_to_phys = arm_smmu_iova_to_phys,
.add_device = arm_smmu_add_device,
.remove_device = arm_smmu_remove_device,
+ .device_group = arm_smmu_device_group,
.domain_get_attr = arm_smmu_domain_get_attr,
.domain_set_attr = arm_smmu_domain_set_attr,
.pgsize_bitmap = -1UL, /* Restricted during device attach */
--
1.9.1
next prev parent reply other threads:[~2015-10-21 21:54 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 21:51 [PATCH 0/8] iommu: Make core iommu-groups code more generic Joerg Roedel
2015-10-21 21:51 ` [PATCH 1/8] iommu: Revive device_group iommu-ops call-back Joerg Roedel
2015-10-21 21:51 ` [PATCH 2/8] iommu: Export and rename iommu_group_get_for_pci_dev() Joerg Roedel
2015-10-21 21:51 ` [PATCH 3/8] iommu: Add generic_device_group() function Joerg Roedel
2015-10-21 21:51 ` [PATCH 4/8] iommu: Add device_group call-back to x86 iommu drivers Joerg Roedel
2015-10-21 21:51 ` [PATCH 5/8] iommu/fsl: Convert to device_group call-back Joerg Roedel
2015-10-21 21:51 ` Joerg Roedel [this message]
2015-10-21 21:51 ` [PATCH 7/8] iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev Joerg Roedel
2015-10-21 21:51 ` [PATCH 8/8] iommu: Move default domain allocation to iommu_group_get_for_dev() Joerg Roedel
2015-10-29 18:22 ` Will Deacon
2015-10-30 14:13 ` Joerg Roedel
2015-11-19 9:06 ` [PATCH 0/8] iommu: Make core iommu-groups code more generic Yong Wu
[not found] ` <1447920801.27650.49.camel@mhfsdcap03>
2015-11-19 13:41 ` Joerg Roedel
2015-12-01 11:29 ` Yong Wu
2015-12-01 15:15 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445464303-18206-7-git-send-email-joro@8bytes.org \
--to=joro@8bytes.org \
--cc=alex.williamson@redhat.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jroedel@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox