From: Marcos Oviedo <devkerp@gmail.com>
To: Larry.Finger@lwfinger.net
Cc: gregkh@linuxfoundation.org, Jes.Sorensen@redhat.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
joe@perches.com, Marcos Oviedo <devkerp@gmail.com>
Subject: [PATCH] Staging: R8723au: rtw_ieee80211: Fixing code style space issues
Date: Wed, 11 Nov 2015 02:48:38 -0500 [thread overview]
Message-ID: <1447228118-18609-1-git-send-email-devkerp@gmail.com> (raw)
Fixing code style space issues at rtw_mcs_rate23a()
Signed-off-by: Marcos Oviedo <devkerp@gmail.com>
---
drivers/staging/rtl8723au/core/rtw_ieee80211.c | 80 ++++++++++++++----------
1 file changed, 48 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/rtl8723au/core/rtw_ieee80211.c b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
index 07a6490..df89833 100644
--- a/drivers/staging/rtl8723au/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
@@ -791,64 +791,80 @@ u16 rtw_mcs_rate23a(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
if (rf_type == RF_1T1R) {
if (mcs->rx_mask[0] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):
- ((short_GI_20)?722:650);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1500 : 1350) :
+ ((short_GI_20) ? 722 : 650);
else if (mcs->rx_mask[0] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):
- ((short_GI_20)?650:585);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1350 : 1215) :
+ ((short_GI_20) ? 650 : 585);
else if (mcs->rx_mask[0] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):
- ((short_GI_20)?578:520);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1200 : 1080) :
+ ((short_GI_20) ? 578 : 520);
else if (mcs->rx_mask[0] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):
- ((short_GI_20)?433:390);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 900 : 810) :
+ ((short_GI_20) ? 433 : 390);
else if (mcs->rx_mask[0] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):
- ((short_GI_20)?289:260);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 600 : 540) :
+ ((short_GI_20) ? 289 : 260);
else if (mcs->rx_mask[0] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):
- ((short_GI_20)?217:195);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 450 : 405) :
+ ((short_GI_20) ? 217 : 195);
else if (mcs->rx_mask[0] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):
- ((short_GI_20)?144:130);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 300 : 270) :
+ ((short_GI_20) ? 144 : 130);
else if (mcs->rx_mask[0] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):
- ((short_GI_20)?72:65);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 150 : 135) :
+ ((short_GI_20) ? 72 : 65);
} else {
if (mcs->rx_mask[1]) {
if (mcs->rx_mask[1] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?3000:2700):((short_GI_20)?1444:1300);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 3000 : 2700) :
+ ((short_GI_20) ? 1444 : 1300);
else if (mcs->rx_mask[1] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?2700:2430):((short_GI_20)?1300:1170);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 2700 : 2430) :
+ ((short_GI_20) ? 1300 : 1170);
else if (mcs->rx_mask[1] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?2400:2160):((short_GI_20)?1156:1040);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 2400 : 2160) :
+ ((short_GI_20) ? 1156 : 1040);
else if (mcs->rx_mask[1] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1800:1620):((short_GI_20)?867:780);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1800 : 1620) :
+ ((short_GI_20) ? 867 : 780);
else if (mcs->rx_mask[1] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1200 : 1080) :
+ ((short_GI_20) ? 578 : 520);
else if (mcs->rx_mask[1] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 900 : 810) :
+ ((short_GI_20) ? 433 : 390);
else if (mcs->rx_mask[1] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 600 : 540) :
+ ((short_GI_20) ? 289 : 260);
else if (mcs->rx_mask[1] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 300 : 270) :
+ ((short_GI_20) ? 144 : 130);
} else {
if (mcs->rx_mask[0] & BIT(7))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1500:1350):((short_GI_20)?722:650);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1500 : 1350) :
+ ((short_GI_20) ? 722 : 650);
else if (mcs->rx_mask[0] & BIT(6))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1350:1215):((short_GI_20)?650:585);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1350 : 1215) :
+ ((short_GI_20) ? 650 : 585);
else if (mcs->rx_mask[0] & BIT(5))
- max_rate = (bw_40MHz) ? ((short_GI_40)?1200:1080):((short_GI_20)?578:520);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 1200 : 1080) :
+ ((short_GI_20) ? 578 : 520);
else if (mcs->rx_mask[0] & BIT(4))
- max_rate = (bw_40MHz) ? ((short_GI_40)?900:810):((short_GI_20)?433:390);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 900 : 810) :
+ ((short_GI_20) ? 433 : 390);
else if (mcs->rx_mask[0] & BIT(3))
- max_rate = (bw_40MHz) ? ((short_GI_40)?600:540):((short_GI_20)?289:260);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 600 : 540) :
+ ((short_GI_20) ? 289 : 260);
else if (mcs->rx_mask[0] & BIT(2))
- max_rate = (bw_40MHz) ? ((short_GI_40)?450:405):((short_GI_20)?217:195);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 450 : 405) :
+ ((short_GI_20) ? 217 : 195);
else if (mcs->rx_mask[0] & BIT(1))
- max_rate = (bw_40MHz) ? ((short_GI_40)?300:270):((short_GI_20)?144:130);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 300 : 270) :
+ ((short_GI_20) ? 144 : 130);
else if (mcs->rx_mask[0] & BIT(0))
- max_rate = (bw_40MHz) ? ((short_GI_40)?150:135):((short_GI_20)?72:65);
+ max_rate = (bw_40MHz) ? ((short_GI_40) ? 150 : 135) :
+ ((short_GI_20) ? 72 : 65);
}
}
return max_rate;
--
1.7.9.5
next reply other threads:[~2015-11-11 21:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-11 7:48 Marcos Oviedo [this message]
2015-11-11 22:12 ` [PATCH] Staging: R8723au: rtw_ieee80211: Fixing code style space issues Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447228118-18609-1-git-send-email-devkerp@gmail.com \
--to=devkerp@gmail.com \
--cc=Jes.Sorensen@redhat.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=joe@perches.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox