public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@kernel.org>,
	Oleg Nesterov <oleg@redhat.com>, Rik van Riel <riel@redhat.com>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [RFC PATCH 2/2] x86/fpu: Get rid of xstate_fault()
Date: Thu, 19 Nov 2015 12:25:26 +0100	[thread overview]
Message-ID: <1447932326-4371-3-git-send-email-bp@alien8.de> (raw)
In-Reply-To: <1447932326-4371-1-git-send-email-bp@alien8.de>

From: Borislav Petkov <bp@suse.de>

Add macros for the alternative XSAVE*/XRSTOR* operations which contain
the fault handling and use them. Kill xstate_fault().

Also, copy_xregs_to_kernel() didn't have the extended state as memory
reference in the asm.

Signed-off-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/include/asm/fpu/internal.h | 105 ++++++++++++++++++------------------
 1 file changed, 52 insertions(+), 53 deletions(-)

diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 709a3df8ab37..eadcdd5bb946 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -224,19 +224,6 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
 #define XRSTOR		".byte " REX_PREFIX "0x0f,0xae,0x2f"
 #define XRSTORS		".byte " REX_PREFIX "0x0f,0xc7,0x1f"
 
-/* xstate instruction fault handler: */
-#define xstate_fault(__err)		\
-					\
-	".section .fixup,\"ax\"\n"	\
-					\
-	"3:  movl $-2,%[_err]\n"	\
-	"    jmp  2b\n"			\
-					\
-	".previous\n"			\
-					\
-	_ASM_EXTABLE(1b, 3b)		\
-	: [_err] "=r" (__err)
-
 #define XSTATE_OP(op, st, lmask, hmask, err)				\
 	asm volatile("1:" op "\n\t"					\
 		     "xor %[err], %[err]\n"				\
@@ -250,6 +237,54 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
 		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
 		     : "memory")
 
+/*
+ * If XSAVES is enabled, it replaces XSAVEOPT because it supports a compact
+ * format and supervisor states in addition to modified optimization in
+ * XSAVEOPT.
+ *
+ * Otherwise, if XSAVEOPT is enabled, XSAVEOPT replaces XSAVE because XSAVEOPT
+ * supports modified optimization which is not supported by XSAVE.
+ *
+ * We use XSAVE as a fallback.
+ *
+ * The 661 label is defined in the ALTERNATIVE* macros as the address of the
+ * original instruction which gets replaced. We need to use it here as the
+ * address of the instruction where we might get an exception at.
+ */
+#define XSTATE_XSAVE(st, lmask, hmask, err)				\
+	asm volatile(ALTERNATIVE_2(XSAVE,				\
+				   XSAVEOPT, X86_FEATURE_XSAVEOPT,	\
+				   XSAVES,   X86_FEATURE_XSAVES)	\
+		     "\n"						\
+		     "xor %[err], %[err]\n"				\
+		     "3:\n"						\
+		     ".pushsection .fixup,\"ax\"\n"			\
+		     "4: movl $-2, %[err]\n"				\
+		     "jmp 3b\n"						\
+		     ".popsection\n"					\
+		     _ASM_EXTABLE(661b, 4b)				\
+		     : [err] "=r" (err)					\
+		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
+		     : "memory")
+
+/*
+ * Use XRSTORS to restore context if it is enabled. XRSTORS supports compact
+ * XSAVE area format.
+ */
+#define XSTATE_XRESTORE(st, lmask, hmask, err)				\
+	asm volatile(ALTERNATIVE(XRSTOR,				\
+				 XRSTORS, X86_FEATURE_XSAVES)		\
+		     "\n"						\
+		     "xor %[err], %[err]\n"				\
+		     "3:\n"						\
+		     ".pushsection .fixup,\"ax\"\n"			\
+		     "4: movl $-2, %[err]\n"				\
+		     "jmp 3b\n"						\
+		     ".popsection\n"					\
+		     _ASM_EXTABLE(661b, 4b)				\
+		     : [err] "=r" (err)					\
+		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
+		     : "memory")
 
 /*
  * This function is called only during boot time when x86 caps are not set
@@ -303,33 +338,11 @@ static inline void copy_xregs_to_kernel(struct xregs_state *xstate)
 	u64 mask = -1;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
 	WARN_ON(!alternatives_patched);
 
-	/*
-	 * If xsaves is enabled, xsaves replaces xsaveopt because
-	 * it supports compact format and supervisor states in addition to
-	 * modified optimization in xsaveopt.
-	 *
-	 * Otherwise, if xsaveopt is enabled, xsaveopt replaces xsave
-	 * because xsaveopt supports modified optimization which is not
-	 * supported by xsave.
-	 *
-	 * If none of xsaves and xsaveopt is enabled, use xsave.
-	 */
-	alternative_input_2(
-		"1:"XSAVE,
-		XSAVEOPT,
-		X86_FEATURE_XSAVEOPT,
-		XSAVES,
-		X86_FEATURE_XSAVES,
-		[xstate] "D" (xstate), "a" (lmask), "d" (hmask) :
-		"memory");
-	asm volatile("2:\n\t"
-		     xstate_fault(err)
-		     : "0" (err)
-		     : "memory");
+	XSTATE_XSAVE(xstate, lmask, hmask, err);
 
 	/* We should never fault when copying to a kernel buffer: */
 	WARN_ON_FPU(err);
@@ -342,23 +355,9 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
 {
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
-	/*
-	 * Use xrstors to restore context if it is enabled. xrstors supports
-	 * compacted format of xsave area which is not supported by xrstor.
-	 */
-	alternative_input(
-		"1: " XRSTOR,
-		XRSTORS,
-		X86_FEATURE_XSAVES,
-		"D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask)
-		: "memory");
-
-	asm volatile("2:\n"
-		     xstate_fault(err)
-		     : "0" (err)
-		     : "memory");
+	XSTATE_XRESTORE(xstate, lmask, hmask, err);
 
 	/* We should never fault when copying from a kernel buffer: */
 	WARN_ON_FPU(err);
-- 
2.3.5


  parent reply	other threads:[~2015-11-19 11:26 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-19 11:25 [RFC PATCH 0/2] x86/fpu: Remove xstate_fault() Borislav Petkov
2015-11-19 11:25 ` [RFC PATCH 1/2] x86/fpu: Add an XSTATE_OP macro Borislav Petkov
2015-11-24  9:34   ` [tip:x86/fpu] x86/fpu: Add an XSTATE_OP() macro tip-bot for Borislav Petkov
2015-11-19 11:25 ` Borislav Petkov [this message]
2015-11-24  9:34   ` [tip:x86/fpu] x86/fpu: Get rid of xstate_fault() tip-bot for Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447932326-4371-3-git-send-email-bp@alien8.de \
    --to=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=mingo@kernel.org \
    --cc=oleg@redhat.com \
    --cc=riel@redhat.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox