From: Priit Laes <plaes@plaes.org>
To: atx@atx.name, linux-sunxi@googlegroups.com
Cc: linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
gpatchesrdh@mveas.com, mturquette@linaro.org,
hdegoede@redhat.com, sboyd@codeaurora.org,
mturquette@baylibre.com, emilio@elopez.com.ar,
linux@arm.linux.org.uk, edubezval@gmail.com, rui.zhang@intel.com,
wens@csie.org, maxime.ripard@free-electrons.com,
galak@codeaurora.org, ijc+devicetree@hellion.org.uk,
mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org
Subject: Re: [linux-sunxi] [PATCH v2 2/5] clk: sunxi: Add driver for the H3 THS clock
Date: Mon, 23 Nov 2015 12:28:09 +0200 [thread overview]
Message-ID: <1448274489.27496.1.camel@plaes.org> (raw)
In-Reply-To: <077fddc9c8d41d4cf55b1dd1c7180c4adee0fce4.1448263428.git.atx@atx.name>
On Mon, 2015-11-23 at 09:02 +0100, Josef Gajdusek wrote:
> This patch adds a driver for the THS clock which is present on the
> Allwinner H3.
>
> Signed-off-by: Josef Gajdusek <atx@atx.name>
> ---
> Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
> drivers/clk/sunxi/Makefile | 1 +
> drivers/clk/sunxi/clk-h3-ths.c | 98
> +++++++++++++++++++++++
> 3 files changed, 100 insertions(+)
> create mode 100644 drivers/clk/sunxi/clk-h3-ths.c
>
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt
> b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 23e7bce..6d63b35 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -73,6 +73,7 @@ Required properties:
> "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
> "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets
> on A80
> "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates +
> resets on A80
> + "allwinner,sun8i-h3-ths-clk" - for THS on H3
>
> Required properties for all clocks:
> - reg : shall be the control register address for the clock.
> diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> index f520af6..1bf8e1c 100644
> --- a/drivers/clk/sunxi/Makefile
> +++ b/drivers/clk/sunxi/Makefile
> @@ -8,6 +8,7 @@ obj-y += clk-a10-hosc.o
> obj-y += clk-a10-mod1.o
> obj-y += clk-a10-pll2.o
> obj-y += clk-a20-gmac.o
> +obj-y += clk-h3-ths.o
> obj-y += clk-mod0.o
> obj-y += clk-simple-gates.o
> obj-y += clk-sun8i-bus-gates.o
> diff --git a/drivers/clk/sunxi/clk-h3-ths.c b/drivers/clk/sunxi/clk-
> h3-ths.c
> new file mode 100644
> index 0000000..663afc0
> --- /dev/null
> +++ b/drivers/clk/sunxi/clk-h3-ths.c
> @@ -0,0 +1,98 @@
> +/*
> + * Sunxi THS clock driver
This should be "Allwinner H3 THS clock driver"
> + *
> + * Copyright (C) 2015 Josef Gajdusek
> + *
> + * This software is licensed under the terms of the GNU General
> Public
> + * License version 2, as published by the Free Software Foundation,
> and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +
> +#define SUN8I_H3_THS_CLK_ENABLE 31
> +#define SUN8I_H3_THS_CLK_DIVIDER_SHIFT 0
> +#define SUN8I_H3_THS_CLK_DIVIDER_WIDTH 2
> +
> +static DEFINE_SPINLOCK(sun8i_h3_ths_clk_lock);
> +
> +static const struct clk_div_table sun8i_h3_ths_clk_table[]
> __initconst = {
> + { .val = 0, .div = 1 },
> + { .val = 1, .div = 2 },
> + { .val = 2, .div = 4 },
> + { .val = 3, .div = 6 },
> + { } /* sentinel */
> +};
> +
> +static void __init sun8i_h3_ths_clk_setup(struct device_node *node)
> +{
> + struct clk *clk;
> + struct clk_gate *gate;
> + struct clk_divider *div;
> + const char *parent;
> + const char *clk_name = node->name;
> + void __iomem *reg;
> + int err;
> +
> + reg = of_io_request_and_map(node, 0,
> of_node_full_name(node));
> +
> + if (IS_ERR(reg))
> + return;
> +
> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> + if (!gate)
> + goto err_unmap;
> +
> + div = kzalloc(sizeof(*gate), GFP_KERNEL);
> + if (!div)
> + goto err_gate_free;
> +
> + of_property_read_string(node, "clock-output-names",
> &clk_name);
> + parent = of_clk_get_parent_name(node, 0);
> +
> + gate->reg = reg;
> + gate->bit_idx = SUN8I_H3_THS_CLK_ENABLE;
> + gate->lock = &sun8i_h3_ths_clk_lock;
> +
> + div->reg = reg;
> + div->shift = SUN8I_H3_THS_CLK_DIVIDER_SHIFT;
> + div->width = SUN8I_H3_THS_CLK_DIVIDER_WIDTH;
> + div->table = sun8i_h3_ths_clk_table;
> + div->lock = &sun8i_h3_ths_clk_lock;
> +
> + clk = clk_register_composite(NULL, clk_name, &parent, 1,
> + NULL, NULL,
> + &div->hw, &clk_divider_ops,
> + &gate->hw, &clk_gate_ops,
> + CLK_SET_RATE_PARENT);
> +
> + if (IS_ERR(clk))
> + goto err_div_free;
> +
> + err = of_clk_add_provider(node, of_clk_src_simple_get, clk);
> + if (err)
> + goto err_unregister_clk;
> +
> + return;
> +
> +err_unregister_clk:
> + clk_unregister(clk);
> +err_gate_free:
> + kfree(gate);
> +err_div_free:
> + kfree(div);
> +err_unmap:
> + iounmap(reg);
> +}
> +
> +CLK_OF_DECLARE(sun8i_h3_ths_clk, "allwinner,sun8i-h3-ths-clk",
> + sun8i_h3_ths_clk_setup);
> --
> 2.4.10
>
next prev parent reply other threads:[~2015-11-23 10:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-23 8:02 [PATCH v2 0/5] sunxi: THS support Josef Gajdusek
2015-11-23 8:02 ` [PATCH v2 1/5] ARM: dts: sun8i: Add SID node Josef Gajdusek
2015-11-23 12:43 ` Maxime Ripard
2015-11-24 3:13 ` Chen-Yu Tsai
2015-11-24 6:38 ` Maxime Ripard
2015-11-24 6:42 ` Chen-Yu Tsai
2015-11-24 7:26 ` Maxime Ripard
[not found] ` <077cd975-1f91-40fe-ab05-2381e4fb6448@googlegroups.com>
2015-11-24 6:38 ` Maxime Ripard
[not found] ` <a7d4e538-db64-476d-b5de-5222419229a2@googlegroups.com>
2015-11-24 9:32 ` [linux-sunxi] " Maxime Ripard
2015-11-25 1:22 ` Shuge
2015-12-01 8:41 ` Maxime Ripard
2015-11-23 8:02 ` [PATCH v2 2/5] clk: sunxi: Add driver for the H3 THS clock Josef Gajdusek
2015-11-23 9:16 ` [linux-sunxi] " LABBE Corentin
2015-11-23 10:28 ` Priit Laes [this message]
2015-11-23 21:37 ` Rob Herring
2015-11-23 8:02 ` [PATCH v2 3/5] thermal: Add a driver for the Allwinner THS sensor Josef Gajdusek
2015-11-24 8:43 ` Maxime Ripard
2015-11-25 11:02 ` [linux-sunxi] " Josef Gajdusek
2015-11-30 19:58 ` Maxime Ripard
2015-11-23 8:02 ` [PATCH v2 4/5] dt-bindings: document sun8i_ths Josef Gajdusek
2015-11-23 9:47 ` Chen-Yu Tsai
2015-11-23 12:38 ` Maxime Ripard
2015-11-23 8:02 ` [PATCH v2 5/5] ARM: dts: sun8i: Add THS node to the H3 .dtsi Josef Gajdusek
2015-11-24 8:45 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448274489.27496.1.camel@plaes.org \
--to=plaes@plaes.org \
--cc=atx@atx.name \
--cc=devicetree@vger.kernel.org \
--cc=edubezval@gmail.com \
--cc=emilio@elopez.com.ar \
--cc=galak@codeaurora.org \
--cc=gpatchesrdh@mveas.com \
--cc=hdegoede@redhat.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=sboyd@codeaurora.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox