From: Caesar Wang <wxt@rock-chips.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-rockchip@lists.infradead.org,
Heiko Stuebner <heiko@sntech.de>,
Dan Carpenter <dan.carpenter@oracle.com>,
Caesar Wang <wxt@rock-chips.com>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
Zhang Rui <rui.zhang@intel.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] thermal: rockchip: Support the RK3399 SoCs in thermal driver
Date: Wed, 25 Nov 2015 15:59:37 +0800 [thread overview]
Message-ID: <1448438377-29203-6-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1448438377-29203-1-git-send-email-wxt@rock-chips.com>
The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU.
channel 1 is for GPU.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
---
drivers/thermal/rockchip_thermal.c | 66 ++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index c5079f9..f863956 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -291,6 +291,44 @@ static const struct tsadc_table v3_code_table[] = {
{TSADCV3_DATA_MASK, 125000},
};
+static const struct tsadc_table v4_code_table[] = {
+ {TSADCV3_DATA_MASK, -40000},
+ {431, -40000},
+ {426, -35000},
+ {421, -30000},
+ {415, -25000},
+ {410, -20000},
+ {405, -15000},
+ {399, -10000},
+ {394, -5000},
+ {389, 0},
+ {383, 5000},
+ {378, 10000},
+ {373, 15000},
+ {367, 20000},
+ {362, 25000},
+ {357, 30000},
+ {351, 35000},
+ {346, 40000},
+ {340, 45000},
+ {335, 50000},
+ {330, 55000},
+ {324, 60000},
+ {319, 65000},
+ {313, 70000},
+ {308, 75000},
+ {302, 80000},
+ {297, 85000},
+ {291, 90000},
+ {286, 95000},
+ {281, 100000},
+ {275, 105000},
+ {270, 110000},
+ {264, 115000},
+ {259, 120000},
+ {253, 125000},
+};
+
static u32 rk_tsadcv2_temp_to_code(struct chip_tsadc_table table,
int temp)
{
@@ -554,6 +592,30 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
},
};
+static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
+ .chn_num = 2, /* two channels for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv2_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v4_code_table,
+ .length = ARRAY_SIZE(v4_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_DECREMENT,
+ },
+};
+
static const struct of_device_id of_rockchip_thermal_match[] = {
{
.compatible = "rockchip,rk3228-tsadc",
@@ -567,6 +629,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
.compatible = "rockchip,rk3368-tsadc",
.data = (void *)&rk3368_tsadc_data,
},
+ {
+ .compatible = "rockchip,rk3399-tsadc",
+ .data = (void *)&rk3399_tsadc_data,
+ },
{ /* end */ },
};
MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
--
1.9.1
prev parent reply other threads:[~2015-11-25 8:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-25 7:59 [PATCH 0/5] Fix a trivial typo and support rk3228/rk3399 SoCs for thermal driver Caesar Wang
2015-11-25 7:59 ` [PATCH 1/5] thermal: rockchip: fix a trivial typo Caesar Wang
2015-11-25 7:59 ` [PATCH 2/5] thermal: rockchip: fix a impossible condition caused by the warning Caesar Wang
2015-11-25 7:59 ` [PATCH 3/5] dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible Caesar Wang
2015-11-25 14:56 ` Heiko Stübner
2015-11-26 2:57 ` Caesar Wang
2015-11-25 20:05 ` Rob Herring
2015-11-25 7:59 ` [PATCH 4/5] thermal: rockchip: Support the RK3228 SoCs in thermal driver Caesar Wang
2015-11-25 7:59 ` Caesar Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448438377-29203-6-git-send-email-wxt@rock-chips.com \
--to=wxt@rock-chips.com \
--cc=dan.carpenter@oracle.com \
--cc=edubezval@gmail.com \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox