From: "Geyslan G. Bem" <geyslan@gmail.com>
To: peter.senna@gmail.com
Cc: "Geyslan G. Bem" <geyslan@gmail.com>,
Johan Hovold <johan@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] usb: serial: remove redundant conditions
Date: Thu, 10 Dec 2015 17:50:09 -0300 [thread overview]
Message-ID: <1449780614-5933-1-git-send-email-geyslan@gmail.com> (raw)
This patch removes redundant conditions.
(!A || (A && B)) is the same as (!A || B).
(length && length > 5) can be reduced to a single evaluation.
Tested by compilation only.
Caught by cppcheck.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
---
drivers/usb/serial/io_edgeport.c | 35 ++++++++++++++---------------------
drivers/usb/serial/mos7840.c | 2 +-
2 files changed, 15 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index c086697..f49327d 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1046,9 +1046,8 @@ static void edge_close(struct usb_serial_port *port)
edge_port->closePending = true;
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPChase) {
/* flush and chase */
edge_port->chaseResponsePending = true;
@@ -1061,9 +1060,8 @@ static void edge_close(struct usb_serial_port *port)
edge_port->chaseResponsePending = false;
}
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPClose))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPClose) {
/* close the port */
dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__);
send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0);
@@ -1612,9 +1610,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
int status;
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPChase) {
/* flush and chase */
edge_port->chaseResponsePending = true;
@@ -1628,9 +1625,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
}
}
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetClrBreak) {
if (break_state == -1) {
dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__);
status = send_iosp_ext_cmd(edge_port,
@@ -2465,9 +2461,8 @@ static void change_port_settings(struct tty_struct *tty,
unsigned char stop_char = STOP_CHAR(tty);
unsigned char start_char = START_CHAR(tty);
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetXChar) {
send_iosp_ext_cmd(edge_port,
IOSP_CMD_SET_XON_CHAR, start_char);
send_iosp_ext_cmd(edge_port,
@@ -2494,13 +2489,11 @@ static void change_port_settings(struct tty_struct *tty,
}
/* Set flow control to the configured value */
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)
send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
- if ((!edge_serial->is_epic) ||
- ((edge_serial->is_epic) &&
- (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
+ if (!edge_serial->is_epic ||
+ edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)
send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 8ac9b55..2c69bfc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -635,7 +635,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
* Byte 4 IIR Port 4 (port.number is 3)
* Byte 5 FIFO status for both */
- if (length && length > 5) {
+ if (length > 5) {
dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
return;
}
--
2.6.3
next reply other threads:[~2015-12-10 20:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-10 20:50 Geyslan G. Bem [this message]
2015-12-10 20:50 ` [PATCH 2/4] usb: gadget: remove redundant condition Geyslan G. Bem
2015-12-10 20:50 ` [PATCH 3/4] usb: host: " Geyslan G. Bem
2015-12-10 20:50 ` [PATCH 4/4] usb: musb: " Geyslan G. Bem
2015-12-11 9:16 ` [PATCH 1/4] usb: serial: remove redundant conditions Johan Hovold
2015-12-11 9:35 ` Geyslan G. Bem
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449780614-5933-1-git-send-email-geyslan@gmail.com \
--to=geyslan@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.senna@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox