public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 12/28] phy: rockchip-usb: move per-phy init into a separate function
Date: Tue, 22 Dec 2015 16:08:45 +0530	[thread overview]
Message-ID: <1450780741-2237-13-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450780741-2237-1-git-send-email-kishon@ti.com>

From: Heiko Stuebner <heiko@sntech.de>

This unclutters the loop in probe a lot and makes current (and future)
error handling easier to read.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-rockchip-usb.c |   83 +++++++++++++++++++++-------------------
 1 file changed, 43 insertions(+), 40 deletions(-)

diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index 2b4802a..ff3ac33 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -103,14 +103,52 @@ static void rockchip_usb_phy_action(void *data)
 		clk_put(rk_phy->clk);
 }
 
+static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
+				 struct device_node *child)
+{
+	struct rockchip_usb_phy *rk_phy;
+	unsigned int reg_offset;
+	int err;
+
+	rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	rk_phy->base = base;
+
+	if (of_property_read_u32(child, "reg", &reg_offset)) {
+		dev_err(base->dev, "missing reg property in node %s\n",
+			child->name);
+		return -EINVAL;
+	}
+
+	rk_phy->reg_offset = reg_offset;
+
+	err = devm_add_action(base->dev, rockchip_usb_phy_action, rk_phy);
+	if (err)
+		return err;
+
+	rk_phy->clk = of_clk_get_by_name(child, "phyclk");
+	if (IS_ERR(rk_phy->clk))
+		rk_phy->clk = NULL;
+
+	rk_phy->phy = devm_phy_create(base->dev, child, &ops);
+	if (IS_ERR(rk_phy->phy)) {
+		dev_err(base->dev, "failed to create PHY\n");
+		return PTR_ERR(rk_phy->phy);
+	}
+	phy_set_drvdata(rk_phy->phy, rk_phy);
+
+	/* only power up usb phy when it use, so disable it when init*/
+	return rockchip_usb_phy_power(rk_phy, 1);
+}
+
 static int rockchip_usb_phy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct rockchip_usb_phy_base *phy_base;
-	struct rockchip_usb_phy *rk_phy;
 	struct phy_provider *phy_provider;
 	struct device_node *child;
-	unsigned int reg_offset;
 	int err;
 
 	phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
@@ -126,50 +164,15 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
 	}
 
 	for_each_available_child_of_node(dev->of_node, child) {
-		rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
-		if (!rk_phy) {
-			err = -ENOMEM;
-			goto put_child;
-		}
-
-		rk_phy->base = phy_base;
-
-		if (of_property_read_u32(child, "reg", &reg_offset)) {
-			dev_err(dev, "missing reg property in node %s\n",
-				child->name);
-			err = -EINVAL;
-			goto put_child;
-		}
-
-		rk_phy->reg_offset = reg_offset;
-
-		err = devm_add_action(dev, rockchip_usb_phy_action, rk_phy);
-		if (err)
+		err = rockchip_usb_phy_init(phy_base, child);
+		if (err) {
+			of_node_put(child);
 			return err;
-
-		rk_phy->clk = of_clk_get_by_name(child, "phyclk");
-		if (IS_ERR(rk_phy->clk))
-			rk_phy->clk = NULL;
-
-		rk_phy->phy = devm_phy_create(dev, child, &ops);
-		if (IS_ERR(rk_phy->phy)) {
-			dev_err(dev, "failed to create PHY\n");
-			err = PTR_ERR(rk_phy->phy);
-			goto put_child;
 		}
-		phy_set_drvdata(rk_phy->phy, rk_phy);
-
-		/* only power up usb phy when it use, so disable it when init*/
-		err = rockchip_usb_phy_power(rk_phy, 1);
-		if (err)
-			goto put_child;
 	}
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
 	return PTR_ERR_OR_ZERO(phy_provider);
-put_child:
-	of_node_put(child);
-	return err;
 }
 
 static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
-- 
1.7.9.5


  parent reply	other threads:[~2015-12-22 10:44 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-22 10:38 [GIT PULL 00/28] phy: for 4.5 merge window Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 01/28] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 02/28] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 03/28] phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 04/28] MAINTAINERS: add Renesas usb2 phy driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 06/28] phy: phy-mt65xx-usb3: improve HS eye diagram Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 07/28] phy-sun4i-usb: Use of_match_node to get model specific config data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 08/28] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 09/28] phy: add phy-hi6220-usb Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 10/28] phy: rockchip-usb: fix clock get-put mismatch Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 11/28] phy: rockchip-usb: introduce a common data-struct for the device Kishon Vijay Abraham I
2015-12-22 10:38 ` Kishon Vijay Abraham I [this message]
2015-12-22 10:38 ` [PATCH 13/28] phy: rockchip-usb: add compatible values for rk3066a and rk3188 Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 14/28] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 15/28] phy: phy_brcmstb_sata: remove duplicate definitions Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 16/28] phy: phy_brcmstb_sata: add data for phy version Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 18/28] phy: berlin-usb: remove non-necessary header files Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 19/28] phy: berlin-usb: don't set device's driver_data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 20/28] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 21/28] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 22/28] phy: ti-pipe3: move sysctrl " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 23/28] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 24/28] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 25/28] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 26/28] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 27/28] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 28/28] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-27  1:01 ` [GIT PULL 00/28] phy: for 4.5 merge window Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1450780741-2237-13-git-send-email-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox