From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 13/28] phy: rockchip-usb: add compatible values for rk3066a and rk3188
Date: Tue, 22 Dec 2015 16:08:46 +0530 [thread overview]
Message-ID: <1450780741-2237-14-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450780741-2237-1-git-send-email-kishon@ti.com>
From: Heiko Stuebner <heiko@sntech.de>
We need custom handling for these two socs in the driver shortly,
so add the necessary compatible values to binding and driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
.../devicetree/bindings/phy/rockchip-usb-phy.txt | 5 ++++-
drivers/phy/phy-rockchip-usb.c | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
index 826454a..9b37242 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -1,7 +1,10 @@
ROCKCHIP USB2 PHY
Required properties:
- - compatible: rockchip,rk3288-usb-phy
+ - compatible: matching the soc type, one of
+ "rockchip,rk3066a-usb-phy"
+ "rockchip,rk3188-usb-phy"
+ "rockchip,rk3288-usb-phy"
- rockchip,grf : phandle to the syscon managing the "general
register files"
- #address-cells: should be 1
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index ff3ac33..16cd533 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -176,6 +176,8 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)
}
static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
+ { .compatible = "rockchip,rk3066a-usb-phy" },
+ { .compatible = "rockchip,rk3188-usb-phy" },
{ .compatible = "rockchip,rk3288-usb-phy" },
{}
};
--
1.7.9.5
next prev parent reply other threads:[~2015-12-22 10:39 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 10:38 [GIT PULL 00/28] phy: for 4.5 merge window Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 01/28] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 02/28] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 03/28] phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 04/28] MAINTAINERS: add Renesas usb2 phy driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 06/28] phy: phy-mt65xx-usb3: improve HS eye diagram Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 07/28] phy-sun4i-usb: Use of_match_node to get model specific config data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 08/28] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 09/28] phy: add phy-hi6220-usb Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 10/28] phy: rockchip-usb: fix clock get-put mismatch Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 11/28] phy: rockchip-usb: introduce a common data-struct for the device Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 12/28] phy: rockchip-usb: move per-phy init into a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` Kishon Vijay Abraham I [this message]
2015-12-22 10:38 ` [PATCH 14/28] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 15/28] phy: phy_brcmstb_sata: remove duplicate definitions Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 16/28] phy: phy_brcmstb_sata: add data for phy version Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 18/28] phy: berlin-usb: remove non-necessary header files Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 19/28] phy: berlin-usb: don't set device's driver_data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 20/28] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 21/28] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 22/28] phy: ti-pipe3: move sysctrl " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 23/28] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 24/28] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 25/28] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 26/28] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 27/28] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 28/28] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-27 1:01 ` [GIT PULL 00/28] phy: for 4.5 merge window Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450780741-2237-14-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox