From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 16/28] phy: phy_brcmstb_sata: add data for phy version
Date: Tue, 22 Dec 2015 16:08:49 +0530 [thread overview]
Message-ID: <1450780741-2237-17-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450780741-2237-1-git-send-email-kishon@ti.com>
From: Jaedon Shin <jaedon.shin@gmail.com>
Add data for phy version, and the default value of version is using the
BRCM_SATA_PHY_28NM.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-brcmstb-sata.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index ddb9b9e..555fb2d 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -30,7 +30,11 @@
#define MAX_PORTS 2
/* Register offset between PHYs in PCB space */
-#define SATA_MDIO_REG_SPACE_SIZE 0x1000
+#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
+
+enum brcm_sata_phy_version {
+ BRCM_SATA_PHY_28NM,
+};
struct brcm_sata_port {
int portnum;
@@ -42,6 +46,7 @@ struct brcm_sata_port {
struct brcm_sata_phy {
struct device *dev;
void __iomem *phy_base;
+ enum brcm_sata_phy_version version;
struct brcm_sata_port phys[MAX_PORTS];
};
@@ -64,8 +69,12 @@ enum sata_mdio_phy_regs_28nm {
static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
+ u32 offset;
- return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
+ if (priv->version == BRCM_SATA_PHY_28NM)
+ offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+
+ return priv->phy_base + (port->portnum * offset);
}
static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
@@ -126,7 +135,8 @@ static const struct phy_ops phy_ops_28nm = {
};
static const struct of_device_id brcm_sata_phy_of_match[] = {
- { .compatible = "brcm,bcm7445-sata-phy" },
+ { .compatible = "brcm,bcm7445-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_28NM },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -135,6 +145,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node, *child;
+ const struct of_device_id *of_id;
struct brcm_sata_phy *priv;
struct resource *res;
struct phy_provider *provider;
@@ -154,6 +165,12 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy_base))
return PTR_ERR(priv->phy_base);
+ of_id = of_match_node(brcm_sata_phy_of_match, dn);
+ if (of_id)
+ priv->version = (enum brcm_sata_phy_version)of_id->data;
+ else
+ priv->version = BRCM_SATA_PHY_28NM;
+
for_each_available_child_of_node(dn, child) {
unsigned int id;
struct brcm_sata_port *port;
--
1.7.9.5
next prev parent reply other threads:[~2015-12-22 10:39 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 10:38 [GIT PULL 00/28] phy: for 4.5 merge window Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 01/28] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 02/28] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 03/28] phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 04/28] MAINTAINERS: add Renesas usb2 phy driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 06/28] phy: phy-mt65xx-usb3: improve HS eye diagram Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 07/28] phy-sun4i-usb: Use of_match_node to get model specific config data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 08/28] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 09/28] phy: add phy-hi6220-usb Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 10/28] phy: rockchip-usb: fix clock get-put mismatch Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 11/28] phy: rockchip-usb: introduce a common data-struct for the device Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 12/28] phy: rockchip-usb: move per-phy init into a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 13/28] phy: rockchip-usb: add compatible values for rk3066a and rk3188 Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 14/28] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 15/28] phy: phy_brcmstb_sata: remove duplicate definitions Kishon Vijay Abraham I
2015-12-22 10:38 ` Kishon Vijay Abraham I [this message]
2015-12-22 10:38 ` [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 18/28] phy: berlin-usb: remove non-necessary header files Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 19/28] phy: berlin-usb: don't set device's driver_data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 20/28] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 21/28] phy: ti-pipe3: move clk initialization to a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 22/28] phy: ti-pipe3: move sysctrl " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 23/28] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 24/28] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 25/28] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 26/28] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 27/28] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 28/28] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-27 1:01 ` [GIT PULL 00/28] phy: for 4.5 merge window Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450780741-2237-17-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox