From: Kishon Vijay Abraham I <kishon@ti.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH 21/28] phy: ti-pipe3: move clk initialization to a separate function
Date: Tue, 22 Dec 2015 16:08:54 +0530 [thread overview]
Message-ID: <1450780741-2237-22-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1450780741-2237-1-git-send-email-kishon@ti.com>
No functional change. Moved clock initialization done in probe to a
separate function as part of cleaning up ti_pipe3_probe.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-ti-pipe3.c | 127 +++++++++++++++++++++++++-------------------
1 file changed, 72 insertions(+), 55 deletions(-)
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index c511105..3379a4d 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -308,48 +308,11 @@ static const struct phy_ops ops = {
static const struct of_device_id ti_pipe3_id_table[];
-static int ti_pipe3_probe(struct platform_device *pdev)
+static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
{
- struct ti_pipe3 *phy;
- struct phy *generic_phy;
- struct phy_provider *phy_provider;
- struct resource *res;
- struct device_node *node = pdev->dev.of_node;
- struct device_node *control_node;
- struct platform_device *control_pdev;
- const struct of_device_id *match;
struct clk *clk;
- struct device *dev = &pdev->dev;
-
- phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
-
- phy->dev = dev;
-
- if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
- match = of_match_device(ti_pipe3_id_table, dev);
- if (!match)
- return -EINVAL;
-
- phy->dpll_map = (struct pipe3_dpll_map *)match->data;
- if (!phy->dpll_map) {
- dev_err(dev, "no DPLL data\n");
- return -EINVAL;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "pll_ctrl");
- phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(phy->pll_ctrl_base))
- return PTR_ERR(phy->pll_ctrl_base);
-
- phy->sys_clk = devm_clk_get(dev, "sysclk");
- if (IS_ERR(phy->sys_clk)) {
- dev_err(dev, "unable to get sysclk\n");
- return -EINVAL;
- }
- }
+ struct device *dev = phy->dev;
+ struct device_node *node = dev->of_node;
phy->refclk = devm_clk_get(dev, "refclk");
if (IS_ERR(phy->refclk)) {
@@ -369,25 +332,17 @@ static int ti_pipe3_probe(struct platform_device *pdev)
}
} else {
phy->wkupclk = ERR_PTR(-ENODEV);
- phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
- "syscon-pllreset");
- if (IS_ERR(phy->dpll_reset_syscon)) {
- dev_info(dev,
- "can't get syscon-pllreset, sata dpll won't idle\n");
- phy->dpll_reset_syscon = NULL;
- } else {
- if (of_property_read_u32_index(node,
- "syscon-pllreset", 1,
- &phy->dpll_reset_reg)) {
- dev_err(dev,
- "couldn't get pllreset reg. offset\n");
- return -EINVAL;
- }
+ }
+
+ if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
+ if (IS_ERR(phy->sys_clk)) {
+ dev_err(dev, "unable to get sysclk\n");
+ return -EINVAL;
}
}
if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
-
clk = devm_clk_get(dev, "dpll_ref");
if (IS_ERR(clk)) {
dev_err(dev, "unable to get dpll ref clk\n");
@@ -418,6 +373,68 @@ static int ti_pipe3_probe(struct platform_device *pdev)
phy->div_clk = ERR_PTR(-ENODEV);
}
+ return 0;
+}
+
+static int ti_pipe3_probe(struct platform_device *pdev)
+{
+ struct ti_pipe3 *phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = dev;
+
+ if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
+ match = of_match_device(ti_pipe3_id_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ phy->dpll_map = (struct pipe3_dpll_map *)match->data;
+ if (!phy->dpll_map) {
+ dev_err(dev, "no DPLL data\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "pll_ctrl");
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->pll_ctrl_base))
+ return PTR_ERR(phy->pll_ctrl_base);
+ }
+
+ if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) {
+ phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pllreset");
+ if (IS_ERR(phy->dpll_reset_syscon)) {
+ dev_info(dev,
+ "can't get syscon-pllreset, sata dpll won't idle\n");
+ phy->dpll_reset_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pllreset", 1,
+ &phy->dpll_reset_reg)) {
+ dev_err(dev,
+ "couldn't get pllreset reg. offset\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ ret = ti_pipe3_get_clk(phy);
+ if (ret)
+ return ret;
+
control_node = of_parse_phandle(node, "ctrl-module", 0);
if (!control_node) {
dev_err(dev, "Failed to get control device phandle\n");
--
1.7.9.5
next prev parent reply other threads:[~2015-12-22 10:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-22 10:38 [GIT PULL 00/28] phy: for 4.5 merge window Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 01/28] phy: rcar-gen3-usb2: Add R-Car Gen3 USB2 PHY driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 02/28] phy: rcar-gen3-usb2: change the mode to OTG on the combined channel Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 03/28] phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 04/28] MAINTAINERS: add Renesas usb2 phy driver Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 05/28] phy: phy-mt65xx-usb3: fix test fail of HS receiver sensitivity Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 06/28] phy: phy-mt65xx-usb3: improve HS eye diagram Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 07/28] phy-sun4i-usb: Use of_match_node to get model specific config data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 08/28] phy-sun4i-usb: Add support for the host usb-phys found on the H3 SoC Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 09/28] phy: add phy-hi6220-usb Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 10/28] phy: rockchip-usb: fix clock get-put mismatch Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 11/28] phy: rockchip-usb: introduce a common data-struct for the device Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 12/28] phy: rockchip-usb: move per-phy init into a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 13/28] phy: rockchip-usb: add compatible values for rk3066a and rk3188 Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 14/28] phy: rockchip-usb: expose the phy-internal PLLs Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 15/28] phy: phy_brcmstb_sata: remove duplicate definitions Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 16/28] phy: phy_brcmstb_sata: add data for phy version Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 17/28] phy: phy_brcmstb_sata: add support for MIPS-based platforms Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 18/28] phy: berlin-usb: remove non-necessary header files Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 19/28] phy: berlin-usb: don't set device's driver_data Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 20/28] phy: ti-pipe3: introduce local struct device* in probe Kishon Vijay Abraham I
2015-12-22 10:38 ` Kishon Vijay Abraham I [this message]
2015-12-22 10:38 ` [PATCH 22/28] phy: ti-pipe3: move sysctrl initialization to a separate function Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 23/28] phy: ti-pipe3: move mem resource " Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 24/28] phy: ti-pipe3: use ti_pipe3_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 25/28] phy: ti-pipe3: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-22 10:38 ` [PATCH 26/28] phy: ti-pipe3: use *syscon* framework API to set PCS value of " Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 27/28] phy: omap-usb2: use omap_usb_power_off to power off the PHY during probe Kishon Vijay Abraham I
2015-12-22 10:39 ` [PATCH 28/28] phy: omap-usb2: use *syscon* framework API to power on/off the PHY Kishon Vijay Abraham I
2015-12-27 1:01 ` [GIT PULL 00/28] phy: for 4.5 merge window Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1450780741-2237-22-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox