From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <patches@opensource.wolfsonmicro.com>
Subject: [PATCH 3/7] mfd: wm8998: Fix defaults array based on testing
Date: Mon, 18 Jan 2016 17:18:16 +0000 [thread overview]
Message-ID: <1453137500-23268-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1453137500-23268-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
My automated test is back and now can check defaults against the actual
hardware. This patch updates the defaults array for the differences
detected and removes a couple of completely unused registers.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/wm8998-tables.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/wm8998-tables.c b/drivers/mfd/wm8998-tables.c
index 4c2dce77..a0de300 100644
--- a/drivers/mfd/wm8998-tables.c
+++ b/drivers/mfd/wm8998-tables.c
@@ -229,8 +229,6 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
{ 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
- { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
- { 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
{ 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
@@ -247,8 +245,6 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */
{ 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
- { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
- { 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
{ 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
@@ -320,7 +316,7 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000434, 0x0000 }, /* R1076 - Output Path Config 5R */
{ 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */
{ 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
- { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */
+ { 0x00000440, 0x002F }, /* R1088 - DRE Enable */
{ 0x00000441, 0xC759 }, /* R1089 - DRE Control 1 */
{ 0x00000442, 0x2A08 }, /* R1089 - DRE Control 2 */
{ 0x00000443, 0x5CFA }, /* R1089 - DRE Control 3 */
@@ -686,7 +682,7 @@ static const struct reg_default wm8998_reg_default[] = {
{ 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */
{ 0x00000C18, 0x0000 }, /* R3096 - GP Switch 1 */
{ 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */
- { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */
+ { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */
{ 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
@@ -888,8 +884,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL1_CONTROL_5:
case ARIZONA_FLL1_CONTROL_6:
case ARIZONA_FLL1_CONTROL_7:
- case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL1_NCO_TEST_0:
case ARIZONA_FLL1_SYNCHRONISER_1:
case ARIZONA_FLL1_SYNCHRONISER_2:
case ARIZONA_FLL1_SYNCHRONISER_3:
@@ -906,8 +900,6 @@ static bool wm8998_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_CONTROL_5:
case ARIZONA_FLL2_CONTROL_6:
case ARIZONA_FLL2_CONTROL_7:
- case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL2_NCO_TEST_0:
case ARIZONA_FLL2_SYNCHRONISER_1:
case ARIZONA_FLL2_SYNCHRONISER_2:
case ARIZONA_FLL2_SYNCHRONISER_3:
--
2.1.4
next prev parent reply other threads:[~2016-01-18 17:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-18 17:18 [PATCH 0/7] Minor Arizona MFD Cleanups Charles Keepax
2016-01-18 17:18 ` [PATCH 1/7] mfd: wm5110: Fix defaults array based on testing Charles Keepax
2016-01-18 17:18 ` [PATCH 2/7] mfd: wm5102: " Charles Keepax
2016-01-18 17:18 ` Charles Keepax [this message]
2016-01-18 17:18 ` [PATCH 4/7] mfd: cs47l24: " Charles Keepax
2016-01-18 17:18 ` [PATCH 5/7] mfd: arizona: Remove duplicate select of MFD_CORE Charles Keepax
2016-01-18 17:18 ` [PATCH 6/7] mfd: arizona: Update small typo in Arizona SPI Kconfig Charles Keepax
2016-01-18 17:18 ` [PATCH 7/7] mfd: arizona: Allow building Arizona MFD as a module Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453137500-23268-4-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).