From: Guenter Roeck <patchwork@patchwork.roeck-us.net>
To: linux-watchdog@vger.kernel.org
Cc: "Wim Van Sebroeck" <wim@iguana.be>,
linux-kernel@vger.kernel.org,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Doug Anderson" <dianders@chromium.org>,
"Guenter Roeck" <linux@roeck-us.net>
Subject: [RFT PATCH] watchdog: gpio: Convert to use infrastructure triggered keepalives
Date: Tue, 26 Jan 2016 07:12:06 -0800 [thread overview]
Message-ID: <1453821126-24646-1-git-send-email-patchwork@patchwork.roeck-us.net> (raw)
From: Guenter Roeck <linux@roeck-us.net>
The watchdog infrastructure now supports handling watchdog keepalive
if the watchdog is running while the watchdog device is closed.
The infrastructure now also supports generating additional heartbeats
if the maximum hardware timeout is smaller than or close to the
configured timeout. Convert the driver to use this infrastructure.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
This patch applies on top of the patch series introducing infrastructure
triggered keepalives. Compile tested only.
drivers/watchdog/gpio_wdt.c | 73 ++++++++-------------------------------------
1 file changed, 13 insertions(+), 60 deletions(-)
diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
index ba066e4a707b..0d46ea02c2ef 100644
--- a/drivers/watchdog/gpio_wdt.c
+++ b/drivers/watchdog/gpio_wdt.c
@@ -18,7 +18,6 @@
#define SOFT_TIMEOUT_MIN 1
#define SOFT_TIMEOUT_DEF 60
-#define SOFT_TIMEOUT_MAX 0xffff
enum {
HW_ALGO_TOGGLE,
@@ -30,11 +29,7 @@ struct gpio_wdt_priv {
bool active_low;
bool state;
bool always_running;
- bool armed;
unsigned int hw_algo;
- unsigned int hw_margin;
- unsigned long last_jiffies;
- struct timer_list timer;
struct watchdog_device wdd;
};
@@ -47,21 +42,10 @@ static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
gpio_direction_input(priv->gpio);
}
-static void gpio_wdt_hwping(unsigned long data)
+static int gpio_wdt_ping(struct watchdog_device *wdd)
{
- struct watchdog_device *wdd = (struct watchdog_device *)data;
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
- if (priv->armed && time_after(jiffies, priv->last_jiffies +
- msecs_to_jiffies(wdd->timeout * 1000))) {
- dev_crit(wdd->parent,
- "Timer expired. System will reboot soon!\n");
- return;
- }
-
- /* Restart timer */
- mod_timer(&priv->timer, jiffies + priv->hw_margin);
-
switch (priv->hw_algo) {
case HW_ALGO_TOGGLE:
/* Toggle output pin */
@@ -75,55 +59,33 @@ static void gpio_wdt_hwping(unsigned long data)
gpio_set_value_cansleep(priv->gpio, priv->active_low);
break;
}
-}
-
-static void gpio_wdt_start_impl(struct gpio_wdt_priv *priv)
-{
- priv->state = priv->active_low;
- gpio_direction_output(priv->gpio, priv->state);
- priv->last_jiffies = jiffies;
- gpio_wdt_hwping((unsigned long)&priv->wdd);
+ return 0;
}
static int gpio_wdt_start(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
- gpio_wdt_start_impl(priv);
- priv->armed = true;
+ priv->state = priv->active_low;
+ gpio_direction_output(priv->gpio, priv->state);
- return 0;
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ return gpio_wdt_ping(wdd);
}
static int gpio_wdt_stop(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
- priv->armed = false;
if (!priv->always_running) {
- mod_timer(&priv->timer, 0);
gpio_wdt_disable(priv);
+ clear_bit(WDOG_HW_RUNNING, &wdd->status);
}
return 0;
}
-static int gpio_wdt_ping(struct watchdog_device *wdd)
-{
- struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
-
- priv->last_jiffies = jiffies;
-
- return 0;
-}
-
-static int gpio_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
-{
- wdd->timeout = t;
-
- return gpio_wdt_ping(wdd);
-}
-
static const struct watchdog_info gpio_wdt_ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
WDIOF_SETTIMEOUT,
@@ -135,7 +97,6 @@ static const struct watchdog_ops gpio_wdt_ops = {
.start = gpio_wdt_start,
.stop = gpio_wdt_stop,
.ping = gpio_wdt_ping,
- .set_timeout = gpio_wdt_set_timeout,
};
static int gpio_wdt_probe(struct platform_device *pdev)
@@ -183,9 +144,6 @@ static int gpio_wdt_probe(struct platform_device *pdev)
if (hw_margin < 2 || hw_margin > 65535)
return -EINVAL;
- /* Use safe value (1/2 of real timeout) */
- priv->hw_margin = msecs_to_jiffies(hw_margin / 2);
-
priv->always_running = of_property_read_bool(pdev->dev.of_node,
"always-running");
@@ -194,31 +152,26 @@ static int gpio_wdt_probe(struct platform_device *pdev)
priv->wdd.info = &gpio_wdt_ident;
priv->wdd.ops = &gpio_wdt_ops;
priv->wdd.min_timeout = SOFT_TIMEOUT_MIN;
- priv->wdd.max_timeout = SOFT_TIMEOUT_MAX;
+ priv->wdd.max_hw_timeout_ms = hw_margin;
priv->wdd.parent = &pdev->dev;
if (watchdog_init_timeout(&priv->wdd, 0, &pdev->dev) < 0)
priv->wdd.timeout = SOFT_TIMEOUT_DEF;
- setup_timer(&priv->timer, gpio_wdt_hwping, (unsigned long)&priv->wdd);
-
watchdog_stop_on_reboot(&priv->wdd);
- ret = watchdog_register_device(&priv->wdd);
- if (ret)
- return ret;
-
if (priv->always_running)
- gpio_wdt_start_impl(priv);
+ gpio_wdt_start(&priv->wdd);
- return 0;
+ ret = watchdog_register_device(&priv->wdd);
+
+ return ret;
}
static int gpio_wdt_remove(struct platform_device *pdev)
{
struct gpio_wdt_priv *priv = platform_get_drvdata(pdev);
- del_timer_sync(&priv->timer);
watchdog_unregister_device(&priv->wdd);
return 0;
--
2.1.4
next reply other threads:[~2016-01-26 15:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-26 15:12 Guenter Roeck [this message]
2016-01-26 15:40 ` [RFT PATCH] watchdog: gpio: Convert to use infrastructure triggered keepalives kbuild test robot
2016-01-26 16:22 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453821126-24646-1-git-send-email-patchwork@patchwork.roeck-us.net \
--to=patchwork@patchwork.roeck-us.net \
--cc=dianders@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).