From: Bean Huo <jackyard88@gmail.com>
To: richard@nod.at, dedekind1@gmail.com, adrian.hunter@intel.com,
computersforpeace@gmail.com, boris.brezillon@free-electrons.com
Cc: beanhuo@micron.com, linux-mtd@lists.infradead.org,
linux-kernel@vger.kernel.org, zszubbocsev@micron.com,
peterpandong@micron.com
Subject: [PATCH v2 11/17] drivers:mtd:ubi:add disable/enable bakvol while ubi write
Date: Tue, 2 Feb 2016 02:30:46 +0000 [thread overview]
Message-ID: <1454380252-16170-12-git-send-email-jackyard88@gmail.com> (raw)
In-Reply-To: <1454380252-16170-1-git-send-email-jackyard88@gmail.com>
From: Bean Huo <beanhuo@micron.com>
This patch is to modify ubi write action, add disable/enable backup operation according
to data type. For EC header, VID header,master node,super block writing,
bakvol module will not backup these data into bakvol volume.
Signed-off-by: BeanHuo <beanhuo@micron.com>
---
drivers/mtd/ubi/eba.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 51bca03..0f1f8a5 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -604,7 +604,7 @@ retry:
memcpy(ubi->peb_buf + offset, buf, len);
- err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, new_pnum, 0, data_size, 0);
if (err) {
mutex_unlock(&ubi->buf_mutex);
up_read(&ubi->fm_eba_sem);
@@ -675,7 +675,7 @@ int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum,
dbg_eba("write %d bytes at offset %d of LEB %d:%d, PEB %d",
len, offset, vol_id, lnum, pnum);
- err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+ err = ubi_io_write_data(ubi, buf, pnum, offset, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write data to PEB %d", pnum);
if (err == -EIO && ubi->bad_allowed)
@@ -726,7 +726,7 @@ retry:
}
if (len) {
- err = ubi_io_write_data(ubi, buf, pnum, offset, len);
+ err = ubi_io_write_data(ubi, buf, pnum, offset, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes at offset %d of LEB %d:%d, PEB %d",
len, offset, vol_id, lnum, pnum);
@@ -848,7 +848,7 @@ retry:
goto write_error;
}
- err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+ err = ubi_io_write_data(ubi, buf, pnum, 0, len, ((lnum < 3) ? 0:1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
len, pnum);
@@ -968,7 +968,7 @@ retry:
goto write_error;
}
- err = ubi_io_write_data(ubi, buf, pnum, 0, len);
+ err = ubi_io_write_data(ubi, buf, pnum, 0, len, ((lnum < 3) ? 0 : 1));
if (err) {
ubi_warn(ubi, "failed to write %d bytes of data to PEB %d",
len, pnum);
@@ -1194,7 +1194,8 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to,
}
if (data_size > 0) {
- err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size);
+ err = ubi_io_write_data(ubi, ubi->peb_buf, to, 0, aldata_size,
+ ((lnum < 3) ? 0 : 1));
if (err) {
if (err == -EIO)
err = MOVE_TARGET_WR_ERR;
--
1.9.1
next prev parent reply other threads:[~2016-02-02 2:32 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 2:30 [PATCH v2 00/17] Add a bakvol module in UBI layer for MLC paired page power loss issue Bean Huo
2016-02-02 2:30 ` [PATCH v2 01/17] include:mtd:add multi-plane page program command Bean Huo
2016-02-02 2:30 ` [PATCH v2 02/17] include:mtd:add multi-plane program in mtd_info Bean Huo
2016-02-02 2:30 ` [PATCH v2 03/17] drivers:mtd:add dual plane page program support in partition layer Bean Huo
2016-02-02 3:00 ` kbuild test robot
2016-02-02 2:30 ` [PATCH v2 04/17] drivers:mtd:nand:enable dual plane page program function Bean Huo
2016-02-02 3:04 ` kbuild test robot
2016-02-02 2:30 ` [PATCH v2 05/17] drivers:mtd:ubi:add bakvol on-flash and RAM data structures Bean Huo
2016-02-02 2:30 ` [PATCH v2 06/17] drivers:mtd:ubi:add bakvol function define in ubi layer Bean Huo
2016-02-02 3:05 ` kbuild test robot
2016-02-02 3:08 ` kbuild test robot
2016-02-02 2:30 ` [PATCH v2 07/17] fs:ubifs:add bakvol function define in ubifs layer Bean Huo
2016-02-02 2:30 ` [PATCH v2 08/17] drivers:mtd:ubi:disable bakvol function while writing volume table Bean Huo
2016-02-02 2:30 ` [PATCH v2 09/17] drivers:mtd:ubi:get PEB according to specfied plane number Bean Huo
2016-02-02 2:30 ` [PATCH v2 10/17] drivers:mtd:ubi:enable bakvol function for fastmap operation Bean Huo
2016-02-02 2:30 ` Bean Huo [this message]
2016-02-02 2:30 ` [PATCH v2 12/17] drivers:mtd:ubi:add disable bakvol while ubi detach Bean Huo
2016-02-02 2:30 ` [PATCH v2 13/17] drivers:mtd:ubi:add bakvol init while attach ubi Bean Huo
2016-02-02 2:30 ` [PATCH v2 14/17] drivers:mtd:ubi:add backup operation in ubi_io_write Bean Huo
2016-02-02 3:22 ` kbuild test robot
2016-02-02 2:30 ` [PATCH v2 15/17] fs:ubifs:enable bakvol module and recover operation Bean Huo
2016-02-02 2:30 ` [PATCH v2 16/17] driver:mtd:ubi:add new bakvol module in ubi layer Bean Huo
2016-02-02 2:30 ` [PATCH v2 17/17] drivers:mtd:ubi: Kconfig Makefile Bean Huo
2016-02-02 3:22 ` kbuild test robot
2016-02-02 3:56 ` kbuild test robot
2016-02-02 3:58 ` kbuild test robot
2016-02-02 4:15 ` Bean Huo 霍斌斌 (beanhuo)
2016-02-03 0:46 ` Brian Norris
2016-02-03 6:14 ` Bean Huo 霍斌斌 (beanhuo)
2016-02-02 23:06 ` [PATCH v2 00/17] Add a bakvol module in UBI layer for MLC paired page power loss issue Richard Weinberger
2016-02-03 6:11 ` Bean Huo 霍斌斌 (beanhuo)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454380252-16170-12-git-send-email-jackyard88@gmail.com \
--to=jackyard88@gmail.com \
--cc=adrian.hunter@intel.com \
--cc=beanhuo@micron.com \
--cc=boris.brezillon@free-electrons.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=peterpandong@micron.com \
--cc=richard@nod.at \
--cc=zszubbocsev@micron.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).