From: Laxman Dewangan <ldewangan@nvidia.com>
To: <lee.jones@linaro.org>, <alexandre.belloni@free-electrons.com>,
<k.kozlowski@samsung.com>, <javier@osg.samsung.com>
Cc: <cw00.choi@samsung.com>, <linux-kernel@vger.kernel.org>,
<rtc-linux@googlegroups.com>,
Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH V3 1/5] rtc: max77686: fix checkpatch error
Date: Wed, 3 Feb 2016 19:17:09 +0530 [thread overview]
Message-ID: <1454507233-9959-2-git-send-email-ldewangan@nvidia.com> (raw)
In-Reply-To: <1454507233-9959-1-git-send-email-ldewangan@nvidia.com>
Fix following check patch error in rtc-max77686 driver:
- Alignment should match open parenthesis.
- braces {} should be used on all arms of this statement.
- Prefer using the BIT macro
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
CC: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes from V1:
- None, added reviewed/tested by.
Changes from V1:
- None
drivers/rtc/rtc-max77686.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index 188593d..253cf12 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -24,20 +24,20 @@
/* RTC Control Register */
#define BCD_EN_SHIFT 0
-#define BCD_EN_MASK (1 << BCD_EN_SHIFT)
+#define BCD_EN_MASK BIT(BCD_EN_SHIFT)
#define MODEL24_SHIFT 1
-#define MODEL24_MASK (1 << MODEL24_SHIFT)
+#define MODEL24_MASK BIT(MODEL24_SHIFT)
/* RTC Update Register1 */
#define RTC_UDR_SHIFT 0
-#define RTC_UDR_MASK (1 << RTC_UDR_SHIFT)
+#define RTC_UDR_MASK BIT(RTC_UDR_SHIFT)
#define RTC_RBUDR_SHIFT 4
-#define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT)
+#define RTC_RBUDR_MASK BIT(RTC_RBUDR_SHIFT)
/* RTC Hour register */
#define HOUR_PM_SHIFT 6
-#define HOUR_PM_MASK (1 << HOUR_PM_SHIFT)
+#define HOUR_PM_MASK BIT(HOUR_PM_SHIFT)
/* RTC Alarm Enable */
#define ALARM_ENABLE_SHIFT 7
-#define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT)
+#define ALARM_ENABLE_MASK BIT(ALARM_ENABLE_SHIFT)
#define REG_RTC_NONE 0xdeadbeef
@@ -205,9 +205,9 @@ static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm,
tm->tm_sec = data[RTC_SEC] & mask;
tm->tm_min = data[RTC_MIN] & mask;
- if (info->rtc_24hr_mode)
+ if (info->rtc_24hr_mode) {
tm->tm_hour = data[RTC_HOUR] & 0x1f;
- else {
+ } else {
tm->tm_hour = data[RTC_HOUR] & 0x0f;
if (data[RTC_HOUR] & HOUR_PM_MASK)
tm->tm_hour += 12;
@@ -256,7 +256,7 @@ static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data,
}
static int max77686_rtc_update(struct max77686_rtc_info *info,
- enum MAX77686_RTC_OP op)
+ enum MAX77686_RTC_OP op)
{
int ret;
unsigned int data;
@@ -547,7 +547,7 @@ out:
}
static int max77686_rtc_alarm_irq_enable(struct device *dev,
- unsigned int enabled)
+ unsigned int enabled)
{
struct max77686_rtc_info *info = dev_get_drvdata(dev);
int ret;
@@ -612,7 +612,7 @@ static int max77686_rtc_probe(struct platform_device *pdev)
int ret;
info = devm_kzalloc(&pdev->dev, sizeof(struct max77686_rtc_info),
- GFP_KERNEL);
+ GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -662,7 +662,8 @@ static int max77686_rtc_probe(struct platform_device *pdev)
}
ret = devm_request_threaded_irq(&pdev->dev, info->virq, NULL,
- max77686_rtc_alarm_irq, 0, "rtc-alarm1", info);
+ max77686_rtc_alarm_irq, 0,
+ "rtc-alarm1", info);
if (ret < 0)
dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
info->virq, ret);
--
2.1.4
next prev parent reply other threads:[~2016-02-03 13:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-03 13:47 [PATCH V3 0/5] rtc: max77686: make max77686 rtc driver as IP driver Laxman Dewangan
2016-02-03 13:47 ` Laxman Dewangan [this message]
2016-02-03 13:47 ` [PATCH V3 2/5] rtc: max77686: use rtc regmap to access RTC registers Laxman Dewangan
2016-02-03 13:47 ` [PATCH V3 3/5] rtc: max77686: avoid reference of parent device info multiple places Laxman Dewangan
2016-02-03 13:47 ` [PATCH V3 4/5] mfd: max77686: do not set i2c client data for rtc i2c client Laxman Dewangan
2016-02-03 13:47 ` [PATCH V3 5/5] rtc: max77686: move initialisation of rtc regmap, irq chip locally Laxman Dewangan
2016-02-04 0:10 ` Krzysztof Kozlowski
2016-02-04 2:03 ` Laxman Dewangan
2016-02-04 2:50 ` Laxman Dewangan
2016-02-04 3:04 ` Javier Martinez Canillas
2016-02-04 16:49 ` Javier Martinez Canillas
2016-02-04 6:58 ` Krzysztof Kozlowski
2016-02-04 9:08 ` Krzysztof Kozlowski
2016-02-04 10:13 ` Laxman Dewangan
2016-02-04 17:35 ` Javier Martinez Canillas
2016-02-05 14:37 ` Laxman Dewangan
2016-02-06 5:30 ` Javier Martinez Canillas
2016-02-06 6:29 ` Laxman Dewangan
2016-02-06 13:01 ` Javier Martinez Canillas
2016-02-06 13:40 ` Laxman Dewangan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454507233-9959-2-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=cw00.choi@samsung.com \
--cc=javier@osg.samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).