Re: [PATCH 2/2] ARM: bcm2835: dt: Add the ethernet to the device tree

[Lubomir Rintel <lkundrak@v3.sk>]

On Thu, 2016-02-04 at 06:28 +0000, Peter Chen wrote:
>  
> > Lubomir Rintel <lkundrak@v3.sk> writes:
> > 
> > > diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > > b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > > index ef54050..32bbd2a 100644
> > > --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > > +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> > 
> > Hi,
> > 
> > Shouldn't this be common to all RPi1 B and RPi2 models, instead of
> > being
> > specific to just RPi B+?
> > 
> > > +&usb {
> > > +	usb1@01 {
> > > +		compatible = "usb1d6b,0002";
> > > +		reg = <01>;
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +
> > > +		ethernet: usbether@01 {
> > > +			compatible = "usb0424,9514";
> > > +			reg = <01>;
> > > +		};
> > > +	};
> > > +};
> > 
> > For reference, on RPi2:
> 
> Using "lsusb -t" you may get bus topology.
> 
> > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
> > SMSC9512/9514 Fast Ethernet Adapter
> 
> It is the ethernet device, you may need to change vid/pid in dts. 
> 
> > Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
> > SMC9514 Hub
> 
> It is the hub device, you may need to change vid/pid in dts.
> 
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > 
>  
> It is root hub, it doesn't need to be described at dts.

Thank you; neither of the vid/pid pairs in the original submission is
okay. I'll follow up with an updated version.

I've also checked this on RPi B rev2; and I'll be including that one,
and the RPI2 too.

I can't find my rev1 RPi B; but maybe I can just do the same for the
same board. It would likely work, but I may get the vid/pid wrong if
it's different from rev2. 

> Best regards,
> Peter

Thanks
Lubo