From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: <lee.jones@linaro.org>
Cc: <linux-kernel@vger.kernel.org>, <patches@opensource.wolfsonmicro.com>
Subject: [PATCH RESEND 2/7] mfd: wm5102: Fix defaults array based on testing
Date: Tue, 9 Feb 2016 10:51:58 +0000 [thread overview]
Message-ID: <1455015123-20506-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1455015123-20506-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
My automated test is back and now can check defaults against the actual
hardware. This patch updates the defaults array for the differences
detected and removes a couple of completely unused registers.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 16 ++++------------
1 file changed, 4 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index 0386eaf..ab8b23b 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -297,7 +297,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000174, 0x007D }, /* R372 - FLL1 Control 4 */
{ 0x00000175, 0x0004 }, /* R373 - FLL1 Control 5 */
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
- { 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
{ 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
@@ -314,7 +313,6 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000194, 0x007D }, /* R404 - FLL2 Control 4 */
{ 0x00000195, 0x0004 }, /* R405 - FLL2 Control 5 */
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
- { 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
{ 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
@@ -338,7 +336,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */
{ 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */
{ 0x000002A6, 0x3737 }, /* R678 - Mic Detect Level 1 */
- { 0x000002A7, 0x372C }, /* R679 - Mic Detect Level 2 */
+ { 0x000002A7, 0x2C37 }, /* R679 - Mic Detect Level 2 */
{ 0x000002A8, 0x1422 }, /* R680 - Mic Detect Level 3 */
{ 0x000002A9, 0x030A }, /* R681 - Mic Detect Level 4 */
{ 0x000002C3, 0x0000 }, /* R707 - Mic noise mix control 1 */
@@ -402,7 +400,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000435, 0x0180 }, /* R1077 - DAC Digital Volume 5R */
{ 0x00000436, 0x0081 }, /* R1078 - DAC Volume Limit 5R */
{ 0x00000437, 0x0200 }, /* R1079 - Noise Gate Select 5R */
- { 0x00000440, 0x8FFF }, /* R1088 - DRE Enable */
+ { 0x00000440, 0x0FFF }, /* R1088 - DRE Enable */
{ 0x00000442, 0x3F0A }, /* R1090 - DRE Control 2 */
{ 0x00000443, 0xDC1F }, /* R1090 - DRE Control 3 */
{ 0x00000450, 0x0000 }, /* R1104 - DAC AEC Control 1 */
@@ -863,7 +861,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000C0F, 0x0400 }, /* R3087 - IRQ CTRL 1 */
{ 0x00000C10, 0x1000 }, /* R3088 - GPIO Debounce Config */
{ 0x00000C20, 0x8002 }, /* R3104 - Misc Pad Ctrl 1 */
- { 0x00000C21, 0x8001 }, /* R3105 - Misc Pad Ctrl 2 */
+ { 0x00000C21, 0x0001 }, /* R3105 - Misc Pad Ctrl 2 */
{ 0x00000C22, 0x0000 }, /* R3106 - Misc Pad Ctrl 3 */
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
@@ -984,7 +982,7 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */
{ 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */
{ 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */
- { 0x00000EE3, 0x0400 }, /* R3811 - ASRC_RATE2 */
+ { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */
{ 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */
{ 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */
{ 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */
@@ -1062,8 +1060,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL1_CONTROL_4:
case ARIZONA_FLL1_CONTROL_5:
case ARIZONA_FLL1_CONTROL_6:
- case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL1_NCO_TEST_0:
case ARIZONA_FLL1_CONTROL_7:
case ARIZONA_FLL1_SYNCHRONISER_1:
case ARIZONA_FLL1_SYNCHRONISER_2:
@@ -1080,8 +1076,6 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_CONTROL_4:
case ARIZONA_FLL2_CONTROL_5:
case ARIZONA_FLL2_CONTROL_6:
- case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
- case ARIZONA_FLL2_NCO_TEST_0:
case ARIZONA_FLL2_CONTROL_7:
case ARIZONA_FLL2_SYNCHRONISER_1:
case ARIZONA_FLL2_SYNCHRONISER_2:
@@ -1849,8 +1843,6 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
case ARIZONA_HAPTICS_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
- case ARIZONA_FLL1_NCO_TEST_0:
- case ARIZONA_FLL2_NCO_TEST_0:
case ARIZONA_DAC_COMP_1:
case ARIZONA_DAC_COMP_2:
case ARIZONA_DAC_COMP_3:
--
2.1.4
next prev parent reply other threads:[~2016-02-09 10:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 10:51 [PATCH 0/7] Minor Arizona MFD Cleanups Charles Keepax
2016-02-09 10:51 ` [PATCH RESEND 1/7] mfd: wm5110: Fix defaults array based on testing Charles Keepax
2016-02-10 16:16 ` Lee Jones
2016-02-09 10:51 ` Charles Keepax [this message]
2016-02-10 16:17 ` [PATCH RESEND 2/7] mfd: wm5102: " Lee Jones
2016-02-09 10:51 ` [PATCH RESEND 3/7] mfd: wm8998: " Charles Keepax
2016-02-10 16:17 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 4/7] mfd: cs47l24: " Charles Keepax
2016-02-10 16:17 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 5/7] mfd: arizona: Remove duplicate select of MFD_CORE Charles Keepax
2016-02-10 16:18 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 6/7] mfd: arizona: Update small typo in Arizona SPI Kconfig Charles Keepax
2016-02-10 16:16 ` Lee Jones
2016-02-09 10:52 ` [PATCH RESEND 7/7] mfd: arizona: Allow building Arizona MFD as a module Charles Keepax
2016-02-09 12:38 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455015123-20506-3-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).