[PATCH v7 0/3] PIC32MZDA Clock Driver

[PATCH v7 0/3] PIC32MZDA Clock Driver

[Joshua Henderson]

Clock bindings got acked and then essentially unacked, while the clock
driver never made it upstream. In the meantime, the initial DTS file
made it upstream. This latest patch series includes a patch to go back
and correct the DTS files to reflect the new clock bindings in this
patch series.

Purna Chandra Mandal (3):
  dt/bindings: Add PIC32 clock binding documentation
  clk: clk-pic32: Add PIC32 clock driver
  MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding

 .../devicetree/bindings/clock/microchip,pic32.txt  |   39 +
 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi        |  236 -----
 arch/mips/boot/dts/pic32/pic32mzda.dtsi            |   63 +-
 arch/mips/boot/dts/pic32/pic32mzda_sk.dts          |    5 +-
 drivers/clk/Kconfig                                |    3 +
 drivers/clk/Makefile                               |    1 +
 drivers/clk/microchip/Makefile                     |    2 +
 drivers/clk/microchip/clk-core.c                   |  955 ++++++++++++++++++++
 drivers/clk/microchip/clk-core.h                   |   78 ++
 drivers/clk/microchip/clk-pic32mzda.c              |  214 +++++
 include/dt-bindings/clock/microchip,pic32-clock.h  |   42 +
 11 files changed, 1379 insertions(+), 259 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
 delete mode 100644 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
 create mode 100644 drivers/clk/microchip/Makefile
 create mode 100644 drivers/clk/microchip/clk-core.c
 create mode 100644 drivers/clk/microchip/clk-core.h
 create mode 100644 drivers/clk/microchip/clk-pic32mzda.c
 create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h

--
1.7.9.5

[PATCH v7 1/3] dt/bindings: Add PIC32 clock binding documentation

[Joshua Henderson]

From: Purna Chandra Mandal <purna.mandal@microchip.com>

Document the devicetree bindings for the clock driver found on Microchip
PIC32 class devices.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
Note: Please pull this complete series through the MIPS tree.

Changes since v6:
	- Update Microchip PIC32 clock binding document based on review
	- Add header defining clocks
Changes since v5: None
Changes since v4: None
Changes since v3: None
Changes since v2:
	- Force lowercase in PIC32 clock binding documentation
Changes since v1: None
---
 .../devicetree/bindings/clock/microchip,pic32.txt  |   39 ++++++++++++++++++
 include/dt-bindings/clock/microchip,pic32-clock.h  |   42 ++++++++++++++++++++
 2 files changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
 create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h

diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
new file mode 100644
index 0000000..5352718
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+  secondary oscillator connected.
+
+Example:
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		/* optional */
+		microchip,pic32mzda-sosc;
+	};
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+	compatible = "microchip,pic32mzda-uart";
+        reg = <>;
+	interrupts = <>;
+	clocks = <&rootclk PB2CLK>;
+};
diff --git a/include/dt-bindings/clock/microchip,pic32-clock.h b/include/dt-bindings/clock/microchip,pic32-clock.h
new file mode 100644
index 0000000..184647a6
--- /dev/null
+++ b/include/dt-bindings/clock/microchip,pic32-clock.h
@@ -0,0 +1,42 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
+#define _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_
+
+/* clock output indices */
+#define POSCCLK		0
+#define FRCCLK		1
+#define BFRCCLK		2
+#define LPRCCLK		3
+#define SOSCCLK		4
+#define FRCDIVCLK	5
+#define PLLCLK		6
+#define SCLK		7
+#define PB1CLK		8
+#define PB2CLK		9
+#define PB3CLK		10
+#define PB4CLK		11
+#define PB5CLK		12
+#define PB6CLK		13
+#define PB7CLK		14
+#define REF1CLK		15
+#define REF2CLK		16
+#define REF3CLK		17
+#define REF4CLK		18
+#define REF5CLK		19
+#define UPLLCLK		20
+#define MAXCLKS		21
+
+#endif	/* _DT_BINDINGS_CLK_MICROCHIP_PIC32_H_ */
-- 
1.7.9.5

[PATCH v7 2/3] clk: clk-pic32: Add PIC32 clock driver

[Joshua Henderson]

From: Purna Chandra Mandal <purna.mandal@microchip.com>

This clock driver implements PIC32 specific clock-tree. clock-tree
entities can only be configured through device-tree file (OF).

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
Note: Please pull this complete series through the MIPS tree.

Changes since v6:
	- Reworked PIC32 clock driver based on review.
	- PIC32 clock driver now separate core functionality from platform
	  specific clock-submodule binding/hierarchy.
	- moved PIC32 driver under clk/microchip/
	- core clk functionality now in clk/microchip/clk-core.c
	- driver now doesn't use device-tree for clock submodules.
	- platform now statically defines clock submodule data-structures
	  and bind them accordingly.
Changes since v5:
	- sort linux includes and asm includes.
	- use BIT() wherever applicable
	- drop 'microchip,ignore-unused' usage, handling in favor of critical
	  clock
	- drop 'fixed divider' handling for periph clock
	- drop use of 'debug_init()' clk operation callback for register dump
	- drop clk_lock(), clk_unlock() spinlock wrapper
	- drop unimplemented pic32_devcon_syslock() macro
	- use readl()/writel() instead of clk_readl()/clk_writel()
	- drop redundant spinlock, unlock calls in sosc_clk_enable()/disable()
	- use CLK_SET_RATE_GATE, _SET_PARENT_GATE for refo-clocks
	- use kcalloc() instead of kmalloc() wherever applicable
	- use of_io_request_and_map() in soc_clock_init()
	- drop use of pbclk(/roclk)_endisable() inline function
	- use readl_poll_timeout_atomic() for wait_for_bit() type loop
	- drop cpu_relax() after clk gating
	- promote u8, u16 to u32 wherever applicable
	- fix sosc clock status polling
	- drop memory alloc from pic32_of_clk_get_parent_indices() instead
	  callers  will supply buffer to hold output parent indices
	- reword comments about spll_clk_set_rate() pre-conditions
	- drop use of CLK_BASIC wherever applicable
	- reword comments in sclk_set_parent()
Changes since v4: None
Changes since v3: None
Changes since v2:
	- Replace __clk_debug with pr_debug
	- Add of_clk_parent_fill usage in PIC32 clock driver
Changes since v1:
	- Remove unused PIC32 MPLL support.
	- Remove support for initializing default parent/rate for REFOSC
	  clocks.
---
 drivers/clk/Kconfig                   |    3 +
 drivers/clk/Makefile                  |    1 +
 drivers/clk/microchip/Makefile        |    2 +
 drivers/clk/microchip/clk-core.c      |  955 +++++++++++++++++++++++++++++++++
 drivers/clk/microchip/clk-core.h      |   78 +++
 drivers/clk/microchip/clk-pic32mzda.c |  214 ++++++++
 6 files changed, 1253 insertions(+)
 create mode 100644 drivers/clk/microchip/Makefile
 create mode 100644 drivers/clk/microchip/clk-core.c
 create mode 100644 drivers/clk/microchip/clk-core.h
 create mode 100644 drivers/clk/microchip/clk-pic32mzda.c

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index eca8e01..41e9c14 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -200,6 +200,9 @@ config COMMON_CLK_CDCE706
 	---help---
 	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
 
+config COMMON_CLK_PIC32
+	def_bool COMMON_CLK && MACH_PIC32
+
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/qcom/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index b038e36..66a6a6b 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
 obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
+obj-$(CONFIG_MACH_PIC32)		+= microchip/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)			+= mmp/
 endif
diff --git a/drivers/clk/microchip/Makefile b/drivers/clk/microchip/Makefile
new file mode 100644
index 0000000..2152f41
--- /dev/null
+++ b/drivers/clk/microchip/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_COMMON_CLK_PIC32) += clk-core.o
+obj-$(CONFIG_PIC32MZDA) += clk-pic32mzda.o
diff --git a/drivers/clk/microchip/clk-core.c b/drivers/clk/microchip/clk-core.c
new file mode 100644
index 0000000..fd12db8
--- /dev/null
+++ b/drivers/clk/microchip/clk-core.c
@@ -0,0 +1,955 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <asm/mach-pic32/pic32.h>
+#include <asm/traps.h>
+
+#include "clk-core.h"
+
+/* OSCCON Reg fields */
+#define OSC_CUR_MASK		0x07
+#define OSC_CUR_SHIFT		12
+#define OSC_NEW_MASK		0x07
+#define OSC_NEW_SHIFT		8
+#define OSC_SWEN		BIT(0)
+
+/* SPLLCON Reg fields */
+#define PLL_RANGE_MASK		0x07
+#define PLL_RANGE_SHIFT		0
+#define PLL_ICLK_MASK		0x01
+#define PLL_ICLK_SHIFT		7
+#define PLL_IDIV_MASK		0x07
+#define PLL_IDIV_SHIFT		8
+#define PLL_ODIV_MASK		0x07
+#define PLL_ODIV_SHIFT		24
+#define PLL_MULT_MASK		0x7F
+#define PLL_MULT_SHIFT		16
+#define PLL_MULT_MAX		128
+#define PLL_ODIV_MIN		1
+#define PLL_ODIV_MAX		5
+
+/* Peripheral Bus Clock Reg Fields */
+#define PB_DIV_MASK		0x7f
+#define PB_DIV_SHIFT		0
+#define PB_DIV_READY		BIT(11)
+#define PB_DIV_ENABLE		BIT(15)
+#define PB_DIV_MAX		128
+#define PB_DIV_MIN		0
+
+/* Reference Oscillator Control Reg fields */
+#define REFO_SEL_MASK		0x0f
+#define REFO_SEL_SHIFT		0
+#define REFO_ACTIVE		BIT(8)
+#define REFO_DIVSW_EN		BIT(9)
+#define REFO_OE			BIT(12)
+#define REFO_ON			BIT(15)
+#define REFO_DIV_SHIFT		16
+#define REFO_DIV_MASK		0x7fff
+
+/* Reference Oscillator Trim Register Fields */
+#define REFO_TRIM_REG		0x10
+#define REFO_TRIM_MASK		0x1ff
+#define REFO_TRIM_SHIFT		23
+#define REFO_TRIM_MAX		511
+
+/* Mux Slew Control Register fields */
+#define SLEW_BUSY		BIT(0)
+#define SLEW_DOWNEN		BIT(1)
+#define SLEW_UPEN		BIT(2)
+#define SLEW_DIV		0x07
+#define SLEW_DIV_SHIFT		8
+#define SLEW_SYSDIV		0x0f
+#define SLEW_SYSDIV_SHIFT	20
+
+/* Clock Poll Timeout */
+#define LOCK_TIMEOUT_US         USEC_PER_MSEC
+
+/* SoC specific clock needed during SPLL clock rate switch */
+static struct clk_hw *pic32_sclk_hw;
+
+static DEFINE_SPINLOCK(lock);
+
+/* add instruction pipeline delay while CPU clock is in-transition. */
+#define cpu_nop5()			\
+do {					\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+	__asm__ __volatile__("nop");	\
+} while (0)
+
+#define clkhw_to_pbclk(_hw)	container_of(_hw, struct pic32_periph_clk, hw)
+
+static int pbclk_is_enabled(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	return readl(pb->ctrl_reg) & PB_DIV_ENABLE;
+}
+
+static int pbclk_enable(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	writel(PB_DIV_ENABLE, PIC32_SET(pb->ctrl_reg));
+	return 0;
+}
+
+static void pbclk_disable(struct clk_hw *hw)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	writel(PB_DIV_ENABLE, PIC32_CLR(pb->ctrl_reg));
+}
+
+static unsigned long calc_best_divided_rate(unsigned long rate,
+					    unsigned long parent_rate,
+					    u32 divider_max,
+					    u32 divider_min)
+{
+	unsigned long divided_rate, divided_rate_down, best_rate;
+	unsigned long div, div_up;
+
+	/* eq. clk_rate = parent_rate / divider.
+	 *
+	 * Find best divider to produce closest of target divided rate.
+	 */
+	div = parent_rate / rate;
+	div = clamp_val(div, divider_min, divider_max);
+	div_up = clamp_val(div + 1, divider_min, divider_max);
+
+	divided_rate = parent_rate / div;
+	divided_rate_down = parent_rate / div_up;
+	if (abs(rate - divided_rate_down) < abs(rate - divided_rate))
+		best_rate = divided_rate_down;
+	else
+		best_rate = divided_rate;
+
+	return best_rate;
+}
+
+static inline u32 pbclk_read_pbdiv(struct pic32_periph_clk *pb)
+{
+	return ((readl(pb->ctrl_reg) >> PB_DIV_SHIFT) & PB_DIV_MASK) + 1;
+}
+
+static unsigned long pbclk_recalc_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+
+	return parent_rate / pbclk_read_pbdiv(pb);
+}
+
+static long pbclk_round_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *parent_rate)
+{
+	return calc_best_divided_rate(rate, *parent_rate,
+				      PB_DIV_MAX, PB_DIV_MIN);
+}
+
+static int pbclk_set_rate(struct clk_hw *hw, unsigned long rate,
+			  unsigned long parent_rate)
+{
+	struct pic32_periph_clk *pb = clkhw_to_pbclk(hw);
+	unsigned long flags;
+	u32 v, div;
+	int err;
+
+	/* check & wait for DIV_READY */
+	err = readl_poll_timeout_atomic(pb->ctrl_reg, v, v & PB_DIV_READY,
+					1, LOCK_TIMEOUT_US);
+	if (err)
+		return err;
+
+	/* calculate clkdiv and best rate */
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* apply new div */
+	v = readl(pb->ctrl_reg);
+	v &= ~PB_DIV_MASK;
+	v |= (div - 1);
+
+	pic32_syskey_unlock();
+
+	writel(v, pb->ctrl_reg);
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	/* wait again, for pbdivready */
+	err = readl_poll_timeout_atomic(pb->ctrl_reg, v, v & PB_DIV_READY,
+					1, LOCK_TIMEOUT_US);
+	if (err)
+		return err;
+
+	/* confirm that new div is applied correctly */
+	return (pbclk_read_pbdiv(pb) == div) ? 0 : -EBUSY;
+}
+
+const struct clk_ops pic32_pbclk_ops = {
+	.enable		= pbclk_enable,
+	.disable	= pbclk_disable,
+	.is_enabled	= pbclk_is_enabled,
+	.recalc_rate	= pbclk_recalc_rate,
+	.round_rate	= pbclk_round_rate,
+	.set_rate	= pbclk_set_rate,
+};
+
+struct clk *pic32_periph_clk_register(struct pic32_periph_clk *pbclk,
+				      void __iomem *clk_iobase)
+{
+	struct clk *clk;
+
+	pbclk->ctrl_reg += (ulong)clk_iobase;
+
+	clk = clk_register(NULL, &pbclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register() failed\n", __func__);
+		return clk;
+	}
+
+	return clk;
+}
+
+/* Reference Oscillator operations */
+#define clkhw_to_refosc(_hw)	container_of(_hw, struct pic32_ref_osc, hw)
+
+static int roclk_is_enabled(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	return readl(refo->regs) & REFO_ON;
+}
+
+static int roclk_enable(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	writel(REFO_ON | REFO_OE, PIC32_SET(refo->regs));
+	return 0;
+}
+
+static void roclk_disable(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+
+	writel(REFO_ON | REFO_OE, PIC32_CLR(refo->regs));
+}
+
+static void roclk_init(struct clk_hw *hw)
+{
+	/* initialize clock in disabled state */
+	roclk_disable(hw);
+}
+
+static u8 roclk_get_parent(struct clk_hw *hw)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	u32 v, i;
+
+	v = (readl(refo->regs) >> REFO_SEL_SHIFT) & REFO_SEL_MASK;
+
+	if (!refo->parent_map)
+		return (u8)v;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (refo->parent_map[i] == v)
+			return (u8)i;
+
+	return -EINVAL;
+}
+
+static unsigned long roclk_calc_rate(unsigned long parent_rate,
+				     u32 rodiv, u32 rotrim)
+{
+	u64 rate64;
+
+	/* fout = fin / [2 * {div + (trim / 512)}]
+	 *	= fin * 512 / [1024 * div + 2 * trim]
+	 *	= fin * 256 / (512 * div + trim)
+	 *	= (fin << 8) / ((div << 9) + trim)
+	 */
+	if (rotrim) {
+		rodiv = (rodiv << 9) + rotrim;
+		rate64 = parent_rate;
+		rate64 <<= 8;
+		do_div(rate64, rodiv);
+	} else if (rodiv) {
+		rate64 = parent_rate / (rodiv << 1);
+	} else {
+		rate64 = parent_rate;
+	}
+	return (unsigned long)rate64;
+}
+
+static void roclk_calc_div_trim(unsigned long rate,
+				unsigned long parent_rate,
+				u32 *rodiv_p, u32 *rotrim_p)
+{
+	u32 div, rotrim, rodiv;
+	u64 frac;
+
+	/* Find integer approximation of floating-point arithmetic.
+	 *      fout = fin / [2 * {rodiv + (rotrim / 512)}] ... (1)
+	 * i.e. fout = fin / 2 * DIV
+	 *      whereas DIV = rodiv + (rotrim / 512)
+	 *
+	 * Since kernel does not perform floating-point arithmatic so
+	 * (rotrim/512) will be zero. And DIV & rodiv will result same.
+	 *
+	 * ie. fout = (fin * 256) / [(512 * rodiv) + rotrim]  ... from (1)
+	 * ie. rotrim = ((fin * 256) / fout) - (512 * DIV)
+	 */
+	if (parent_rate <= rate) {
+		div = 0;
+		frac = 0;
+		rodiv = 0;
+		rotrim = 0;
+	} else {
+		div = parent_rate / (rate << 1);
+		frac = parent_rate;
+		frac <<= 8;
+		do_div(frac, rate);
+		frac -= (u64)(div << 9);
+
+		rodiv = (div > REFO_DIV_MASK) ? REFO_DIV_MASK : div;
+		rotrim = (frac >= REFO_TRIM_MAX) ? REFO_TRIM_MAX : frac;
+	}
+
+	if (rodiv_p)
+		*rodiv_p = rodiv;
+
+	if (rotrim_p)
+		*rotrim_p = rotrim;
+}
+
+static unsigned long roclk_recalc_rate(struct clk_hw *hw,
+				       unsigned long parent_rate)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	u32 v, rodiv, rotrim;
+
+	/* get rodiv */
+	v = readl(refo->regs);
+	rodiv = (v >> REFO_DIV_SHIFT) & REFO_DIV_MASK;
+
+	/* get trim */
+	v = readl(refo->regs + REFO_TRIM_REG);
+	rotrim = (v >> REFO_TRIM_SHIFT) & REFO_TRIM_MASK;
+
+	return roclk_calc_rate(parent_rate, rodiv, rotrim);
+}
+
+static long roclk_round_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long *parent_rate)
+{
+	u32 rotrim, rodiv;
+
+	/* calculate dividers for new rate */
+	roclk_calc_div_trim(rate, *parent_rate, &rodiv, &rotrim);
+
+	/* caclulate new rate (rounding) based on new rodiv & rotrim */
+	return roclk_calc_rate(*parent_rate, rodiv, rotrim);
+}
+
+static int roclk_determine_rate(struct clk_hw *hw,
+				struct clk_rate_request *req)
+{
+	struct clk_hw *parent_clk, *best_parent_clk = NULL;
+	unsigned int i, delta, best_delta = -1;
+	unsigned long parent_rate, best_parent_rate = 0;
+	unsigned long best = 0, nearest_rate;
+
+	/* find a parent which can generate nearest clkrate >= rate */
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++) {
+		/* get parent */
+		parent_clk = clk_hw_get_parent_by_index(hw, i);
+		if (!parent_clk)
+			continue;
+
+		/* skip if parent runs slower than target rate */
+		parent_rate = clk_hw_get_rate(parent_clk);
+		if (req->rate > parent_rate)
+			continue;
+
+		nearest_rate = roclk_round_rate(hw, req->rate, &parent_rate);
+		delta = abs(nearest_rate - req->rate);
+		if ((nearest_rate >= req->rate) && (delta < best_delta)) {
+			best_parent_clk = parent_clk;
+			best_parent_rate = parent_rate;
+			best = nearest_rate;
+			best_delta = delta;
+
+			if (delta == 0)
+				break;
+		}
+	}
+
+	/* if no match found, retain old rate */
+	if (!best_parent_clk) {
+		pr_err("%s:%s, no parent found for rate %lu.\n",
+		       __func__, clk_hw_get_name(hw), req->rate);
+		best_parent_clk = clk_hw_get_parent(hw);
+		best_parent_rate = clk_hw_get_rate(best_parent_clk);
+		best = clk_hw_get_rate(hw);
+	}
+
+	pr_debug("%s,rate %lu, best_parent(%s, %lu), best %lu, delta %d\n",
+		 clk_hw_get_name(hw), req->rate,
+		 clk_hw_get_name(best_parent_clk), best_parent_rate,
+		 best, best_delta);
+
+	if (req->best_parent_rate)
+		req->best_parent_rate = best_parent_rate;
+
+	if (req->best_parent_hw)
+		req->best_parent_hw = best_parent_clk;
+
+	return best;
+}
+
+static int roclk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	unsigned long flags;
+	u32 v;
+	int err;
+
+	if (refo->parent_map)
+		index = refo->parent_map[index];
+
+	/* wait until ACTIVE bit is zero or timeout */
+	err = readl_poll_timeout_atomic(refo->regs, v, !(v & REFO_ACTIVE),
+					1, LOCK_TIMEOUT_US);
+	if (err) {
+		pr_err("%s: poll failed, clk active\n", clk_hw_get_name(hw));
+		return err;
+	}
+
+	spin_lock_irqsave(&lock, flags);
+
+	pic32_syskey_unlock();
+
+	/* calculate & apply new */
+	v = readl(refo->regs);
+	v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+	v |= index << REFO_SEL_SHIFT;
+
+	writel(v, refo->regs);
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	return 0;
+}
+
+static int roclk_set_rate_and_parent(struct clk_hw *hw,
+				     unsigned long rate,
+				     unsigned long parent_rate,
+				     u8 index)
+{
+	struct pic32_ref_osc *refo = clkhw_to_refosc(hw);
+	unsigned long flags;
+	u32 trim, rodiv, v;
+	int err;
+
+	/* calculate new rodiv & rotrim for new rate */
+	roclk_calc_div_trim(rate, parent_rate, &rodiv, &trim);
+
+	pr_debug("parent_rate = %lu, rate = %lu, div = %d, trim = %d\n",
+		 parent_rate, rate, rodiv, trim);
+
+	/* wait till source change is active */
+	err = readl_poll_timeout_atomic(refo->regs, v,
+					!(v & (REFO_ACTIVE | REFO_DIVSW_EN)),
+					1, LOCK_TIMEOUT_US);
+	if (err) {
+		pr_err("%s: poll timedout, clock is still active\n", __func__);
+		return err;
+	}
+
+	spin_lock_irqsave(&lock, flags);
+	v = readl(refo->regs);
+
+	pic32_syskey_unlock();
+
+	/* apply parent, if required */
+	if (refo->parent_map)
+		index = refo->parent_map[index];
+
+	v &= ~(REFO_SEL_MASK << REFO_SEL_SHIFT);
+	v |= index << REFO_SEL_SHIFT;
+
+	/* apply RODIV */
+	v &= ~(REFO_DIV_MASK << REFO_DIV_SHIFT);
+	v |= rodiv << REFO_DIV_SHIFT;
+	writel(v, refo->regs);
+
+	/* apply ROTRIM */
+	v = readl(refo->regs + REFO_TRIM_REG);
+	v &= ~(REFO_TRIM_MASK << REFO_TRIM_SHIFT);
+	v |= trim << REFO_TRIM_SHIFT;
+	writel(v, refo->regs + REFO_TRIM_REG);
+
+	/* enable & activate divider switching */
+	writel(REFO_ON | REFO_DIVSW_EN, PIC32_SET(refo->regs));
+
+	/* wait till divswen is in-progress */
+	err = readl_poll_timeout_atomic(refo->regs, v, !(v & REFO_DIVSW_EN),
+					1, LOCK_TIMEOUT_US);
+	/* leave the clk gated as it was */
+	writel(REFO_ON, PIC32_CLR(refo->regs));
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	return err;
+}
+
+static int roclk_set_rate(struct clk_hw *hw, unsigned long rate,
+			  unsigned long parent_rate)
+{
+	u8 index = roclk_get_parent(hw);
+
+	return roclk_set_rate_and_parent(hw, rate, parent_rate, index);
+}
+
+const struct clk_ops pic32_roclk_ops = {
+	.enable			= roclk_enable,
+	.disable		= roclk_disable,
+	.is_enabled		= roclk_is_enabled,
+	.get_parent		= roclk_get_parent,
+	.set_parent		= roclk_set_parent,
+	.determine_rate		= roclk_determine_rate,
+	.recalc_rate		= roclk_recalc_rate,
+	.round_rate		= roclk_round_rate,
+	.set_rate_and_parent	= roclk_set_rate_and_parent,
+	.set_rate		= roclk_set_rate,
+	.init			= roclk_init,
+};
+
+struct clk *pic32_refo_clk_register(struct pic32_ref_osc *refo,
+				    void __iomem *clk_iobase)
+{
+	struct clk *clk;
+
+	refo->regs += (ulong)clk_iobase;
+
+	clk = clk_register(NULL, &refo->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk_register() failed\n", __func__);
+		return clk;
+	}
+
+	return clk;
+}
+
+#define clkhw_to_spll(_hw)	container_of(_hw, struct pic32_sys_pll, hw)
+
+static inline u32 spll_odiv_to_divider(u32 odiv)
+{
+	odiv = clamp_val(odiv, PLL_ODIV_MIN, PLL_ODIV_MAX);
+
+	return 1 << odiv;
+}
+
+static unsigned long spll_calc_mult_div(struct pic32_sys_pll *pll,
+					unsigned long rate,
+					unsigned long parent_rate,
+					u32 *mult_p, u32 *odiv_p)
+{
+	u32 mul, div, best_mul = 1, best_div = 1;
+	unsigned long new_rate, best_rate = rate;
+	unsigned int best_delta = -1, delta, match_found = 0;
+	u64 rate64;
+
+	parent_rate /= pll->idiv;
+
+	for (mul = 1; mul <= PLL_MULT_MAX; mul++) {
+		for (div = PLL_ODIV_MIN; div <= PLL_ODIV_MAX; div++) {
+			rate64 = parent_rate;
+			rate64 *= mul;
+			do_div(rate64, 1 << div);
+			new_rate = (u32)rate64;
+			delta = abs(rate - new_rate);
+			if ((new_rate >= rate) && (delta < best_delta)) {
+				best_delta = delta;
+				best_rate = new_rate;
+				best_mul = mul;
+				best_div = div;
+				match_found = 1;
+			}
+		}
+	}
+
+	if (!match_found) {
+		pr_warn("spll: no match found\n");
+		return 0;
+	}
+
+	pr_debug("rate %lu, par_rate %lu/mult %u, div %u, best_rate %lu\n",
+		 rate, parent_rate, best_mul, best_div, best_rate);
+
+	if (mult_p)
+		*mult_p = best_mul - 1;
+
+	if (odiv_p)
+		*odiv_p = best_div;
+
+	return best_rate;
+}
+
+static unsigned long spll_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct pic32_sys_pll *pll = clkhw_to_spll(hw);
+	unsigned long pll_in_rate;
+	u32 mult, odiv, div, v;
+	u64 rate64;
+
+	v = readl(pll->ctrl_reg);
+	odiv = ((v >> PLL_ODIV_SHIFT) & PLL_ODIV_MASK);
+	mult = ((v >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1;
+	div = spll_odiv_to_divider(odiv);
+
+	/* pll_in_rate = parent_rate / idiv
+	 * pll_out_rate = pll_in_rate * mult / div;
+	 */
+	pll_in_rate = parent_rate / pll->idiv;
+	rate64 = pll_in_rate;
+	rate64 *= mult;
+	do_div(rate64, div);
+
+	return (unsigned long)rate64;
+}
+
+static long spll_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *parent_rate)
+{
+	struct pic32_sys_pll *pll = clkhw_to_spll(hw);
+
+	return spll_calc_mult_div(pll, rate, *parent_rate, NULL, NULL);
+}
+
+static int spll_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct pic32_sys_pll *pll = clkhw_to_spll(hw);
+	unsigned long ret, flags;
+	u32 mult, odiv, v;
+	int err;
+
+	ret = spll_calc_mult_div(pll, rate, parent_rate, &mult, &odiv);
+	if (!ret)
+		return -EINVAL;
+
+	/*
+	 * We can't change SPLL counters when it is in-active use
+	 * by system clock. So ensure that PLL clock is not active
+	 * parent of SYSCLK before applying new counter/rate.
+	 */
+
+	/* Is spll_clk active parent of sys_clk ? */
+	if (unlikely(clk_hw_get_parent(pic32_sclk_hw) == hw)) {
+		pr_err("%s: failed, clk in-use\n", __func__);
+		return -EBUSY;
+	}
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* apply new multiplier & divisor (read-modify-write) */
+	v = readl(pll->ctrl_reg);
+	v &= ~(PLL_MULT_MASK << PLL_MULT_SHIFT);
+	v &= ~(PLL_ODIV_MASK << PLL_ODIV_SHIFT);
+	v |= (mult << PLL_MULT_SHIFT) | (odiv << PLL_ODIV_SHIFT);
+
+	/* sys unlock before write */
+	pic32_syskey_unlock();
+
+	writel(v, pll->ctrl_reg);
+	cpu_relax();
+
+	/* insert few nops (5-stage) to ensure CPU does not hang */
+	cpu_nop5();
+	cpu_nop5();
+
+	/* Wait until PLL is locked (maximum 100 usecs). */
+	err = readl_poll_timeout_atomic(pll->status_reg, v,
+					v & pll->lock_mask, 1, 100);
+	spin_unlock_irqrestore(&lock, flags);
+
+	return err;
+}
+
+/* SPLL clock operation */
+const struct clk_ops pic32_spll_ops = {
+	.recalc_rate	= spll_clk_recalc_rate,
+	.round_rate	= spll_clk_round_rate,
+	.set_rate	= spll_clk_set_rate,
+};
+
+struct clk *pic32_spll_clk_register(struct pic32_sys_pll *spll,
+				    void __iomem *clk_iobase)
+{
+	struct clk *pll_clk;
+
+	spll->ctrl_reg += (ulong)clk_iobase;
+	spll->status_reg += (ulong)clk_iobase;
+
+	/* cache PLL idiv; PLL driver uses it as constant.*/
+	spll->idiv = (readl(spll->ctrl_reg) >> PLL_IDIV_SHIFT) & PLL_IDIV_MASK;
+	spll->idiv += 1;
+
+	pll_clk = clk_register(NULL, &spll->hw);
+	if (IS_ERR(pll_clk)) {
+		pr_err("sys_pll: clk_register() failed\n");
+		return pll_clk;
+	}
+
+	return pll_clk;
+}
+
+/* System mux clock(aka SCLK) */
+#define clkhw_to_sys_clk(_hw)	container_of(_hw, struct pic32_sys_clk, hw)
+
+static unsigned long sclk_get_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw);
+	u32 div;
+
+	div = (readl(sclk->slew_reg) >> SLEW_SYSDIV_SHIFT) & SLEW_SYSDIV;
+	div += 1; /* sys-div to divider */
+
+	return parent_rate / div;
+}
+
+static long sclk_round_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long *parent_rate)
+{
+	return calc_best_divided_rate(rate, *parent_rate, SLEW_SYSDIV, 1);
+}
+
+static int sclk_set_rate(struct clk_hw *hw,
+			 unsigned long rate, unsigned long parent_rate)
+{
+	struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw);
+	unsigned long flags;
+	u32 v, div;
+	int err;
+
+	div = parent_rate / rate;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* apply new div */
+	v = readl(sclk->slew_reg);
+	v &= ~(SLEW_SYSDIV << SLEW_SYSDIV_SHIFT);
+	v |= (div - 1) << SLEW_SYSDIV_SHIFT;
+
+	pic32_syskey_unlock();
+
+	writel(v, sclk->slew_reg);
+
+	/* wait until BUSY is cleared */
+	err = readl_poll_timeout_atomic(sclk->slew_reg, v,
+					!(v & SLEW_BUSY), 1, LOCK_TIMEOUT_US);
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	return err;
+}
+
+static u8 sclk_get_parent(struct clk_hw *hw)
+{
+	struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw);
+	u32 i, v;
+
+	v = (readl(sclk->mux_reg) >> OSC_CUR_SHIFT) & OSC_CUR_MASK;
+
+	if (!sclk->parent_map)
+		return (u8)v;
+
+	for (i = 0; i < clk_hw_get_num_parents(hw); i++)
+		if (sclk->parent_map[i] == v)
+			return (u8)i;
+	return -EINVAL;
+}
+
+static int sclk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw);
+	unsigned long flags;
+	u32 nosc, cosc, v;
+	int err;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* find new_osc */
+	nosc = sclk->parent_map ? sclk->parent_map[index] : index;
+
+	/* set new parent */
+	v = readl(sclk->mux_reg);
+	v &= ~(OSC_NEW_MASK << OSC_NEW_SHIFT);
+	v |= nosc << OSC_NEW_SHIFT;
+
+	pic32_syskey_unlock();
+
+	writel(v, sclk->mux_reg);
+
+	/* initate switch */
+	writel(OSC_SWEN, PIC32_SET(sclk->mux_reg));
+	cpu_relax();
+
+	/* add nop to flush pipeline (as cpu_clk is in-flux) */
+	cpu_nop5();
+
+	/* wait for SWEN bit to clear */
+	err = readl_poll_timeout_atomic(sclk->slew_reg, v,
+					!(v & OSC_SWEN), 1, LOCK_TIMEOUT_US);
+
+	spin_unlock_irqrestore(&lock, flags);
+
+	/*
+	 * SCLK clock-switching logic might reject a clock switching request
+	 * if pre-requisites (like new clk_src not present or unstable) are
+	 * not met.
+	 * So confirm before claiming success.
+	 */
+	cosc = (readl(sclk->mux_reg) >> OSC_CUR_SHIFT) & OSC_CUR_MASK;
+	if (cosc != nosc) {
+		pr_err("%s: err, failed to set_parent() to %d, current %d\n",
+		       clk_hw_get_name(hw), nosc, cosc);
+		err = -EBUSY;
+	}
+
+	return err;
+}
+
+static void sclk_init(struct clk_hw *hw)
+{
+	struct pic32_sys_clk *sclk = clkhw_to_sys_clk(hw);
+	unsigned long flags;
+	u32 v;
+
+	/* Maintain reference to this clk, required in spll_clk_set_rate() */
+	pic32_sclk_hw = hw;
+
+	/* apply slew divider on both up and down scaling */
+	if (sclk->slew_div) {
+		spin_lock_irqsave(&lock, flags);
+		v = readl(sclk->slew_reg);
+		v &= ~(SLEW_DIV << SLEW_DIV_SHIFT);
+		v |= sclk->slew_div << SLEW_DIV_SHIFT;
+		v |= SLEW_DOWNEN | SLEW_UPEN;
+		writel(v, sclk->slew_reg);
+		spin_unlock_irqrestore(&lock, flags);
+	}
+}
+
+/* sclk with post-divider */
+const struct clk_ops pic32_sclk_ops = {
+	.get_parent	= sclk_get_parent,
+	.set_parent	= sclk_set_parent,
+	.round_rate	= sclk_round_rate,
+	.set_rate	= sclk_set_rate,
+	.recalc_rate	= sclk_get_rate,
+	.init		= sclk_init,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+/* sclk with no slew and no post-divider */
+const struct clk_ops pic32_sclk_no_div_ops = {
+	.get_parent	= sclk_get_parent,
+	.set_parent	= sclk_set_parent,
+	.init		= sclk_init,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+struct clk *pic32_sys_clk_register(struct pic32_sys_clk *sclk,
+				   void __iomem *clk_iobase)
+{
+	struct clk *clk;
+
+	sclk->mux_reg += (ulong)clk_iobase;
+	sclk->slew_reg += (ulong)clk_iobase;
+
+	clk = clk_register(NULL, &sclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: clk register failed\n", __func__);
+		return clk;
+	}
+
+	return clk;
+}
+
+#define clkhw_to_sosc(_hw)	container_of(_hw, struct pic32_sec_osc, hw)
+static int sosc_clk_enable(struct clk_hw *hw)
+{
+	struct pic32_sec_osc *sosc = clkhw_to_sosc(hw);
+	u32 v;
+
+	/* enable SOSC */
+	pic32_syskey_unlock();
+	writel(sosc->enable_bitmask, PIC32_SET(sosc->enable_reg));
+
+	/* wait till warm-up period expires or ready-status is updated */
+	return readl_poll_timeout_atomic(sosc->status_reg, v,
+					 v & sosc->status_bitmask, 1, 100);
+}
+
+static void sosc_clk_disable(struct clk_hw *hw)
+{
+	struct pic32_sec_osc *sosc = clkhw_to_sosc(hw);
+
+	pic32_syskey_unlock();
+	writel(sosc->enable_bitmask, PIC32_CLR(sosc->enable_reg));
+}
+
+static int sosc_clk_is_enabled(struct clk_hw *hw)
+{
+	struct pic32_sec_osc *sosc = clkhw_to_sosc(hw);
+	u32 enabled, ready;
+
+	/* check enabled and ready status */
+	enabled = readl(sosc->enable_reg) & sosc->enable_bitmask;
+	ready = readl(sosc->status_reg) & sosc->status_bitmask;
+
+	return enabled && ready;
+}
+
+static unsigned long sosc_clk_calc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	return clkhw_to_sosc(hw)->fixed_rate;
+}
+
+const struct clk_ops pic32_sosc_ops = {
+	.enable = sosc_clk_enable,
+	.disable = sosc_clk_disable,
+	.is_enabled = sosc_clk_is_enabled,
+	.recalc_rate = sosc_clk_calc_rate,
+};
+
+struct clk *pic32_sosc_clk_register(struct pic32_sec_osc *sosc,
+				    void __iomem *clk_iobase)
+{
+	sosc->enable_reg += (ulong)clk_iobase;
+	sosc->status_reg += (ulong)clk_iobase;
+
+	return clk_register(NULL, &sosc->hw);
+}
diff --git a/drivers/clk/microchip/clk-core.h b/drivers/clk/microchip/clk-core.h
new file mode 100644
index 0000000..276869a
--- /dev/null
+++ b/drivers/clk/microchip/clk-core.h
@@ -0,0 +1,78 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#ifndef __MICROCHIP_CLK_PIC32_H_
+#define __MICROCHIP_CLK_PIC32_H_
+
+struct clk_hw;
+
+/* System PLL clock */
+struct pic32_sys_pll {
+	struct clk_hw hw;
+	void __iomem *ctrl_reg;
+	void __iomem *status_reg;
+	u32 lock_mask;
+	u32 idiv; /* PLL iclk divider, treated fixed */
+};
+
+/* System clock */
+struct pic32_sys_clk {
+	struct clk_hw hw;
+	void __iomem *mux_reg;
+	void __iomem *slew_reg;
+	const u32 *parent_map;
+	const u32 slew_div;
+};
+
+/* Reference Oscillator clock */
+struct pic32_ref_osc {
+	struct clk_hw hw;
+	void __iomem *regs;
+	const u32 *parent_map;
+};
+
+/* Peripheral Bus clock */
+struct pic32_periph_clk {
+	struct clk_hw hw;
+	void __iomem *ctrl_reg;
+};
+
+/* External Secondary Oscillator clock  */
+struct pic32_sec_osc {
+	struct clk_hw hw;
+	void __iomem *enable_reg;
+	void __iomem *status_reg;
+	u32 enable_bitmask;
+	u32 status_bitmask;
+	unsigned long fixed_rate;
+};
+
+extern const struct clk_ops pic32_pbclk_ops;
+extern const struct clk_ops pic32_sclk_ops;
+extern const struct clk_ops pic32_sclk_no_div_ops;
+extern const struct clk_ops pic32_spll_ops;
+extern const struct clk_ops pic32_roclk_ops;
+extern const struct clk_ops pic32_sosc_ops;
+
+struct clk *pic32_periph_clk_register(struct pic32_periph_clk *pbclk,
+				      void __iomem *clk_iobase);
+struct clk *pic32_refo_clk_register(struct pic32_ref_osc *refo,
+				    void __iomem *clk_iobase);
+struct clk *pic32_sys_clk_register(struct pic32_sys_clk *sclk,
+				   void __iomem *clk_iobase);
+struct clk *pic32_spll_clk_register(struct pic32_sys_pll *spll,
+				    void __iomem *clk_iobase);
+struct clk *pic32_sosc_clk_register(struct pic32_sec_osc *sosc,
+				    void __iomem *clk_iobase);
+
+#endif /* __MICROCHIP_CLK_PIC32_H_*/
diff --git a/drivers/clk/microchip/clk-pic32mzda.c b/drivers/clk/microchip/clk-pic32mzda.c
new file mode 100644
index 0000000..8fd812e
--- /dev/null
+++ b/drivers/clk/microchip/clk-pic32mzda.c
@@ -0,0 +1,214 @@
+/*
+ * Purna Chandra Mandal,<purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#include <dt-bindings/clock/microchip,pic32-clock.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <asm/traps.h>
+
+#include "clk-core.h"
+
+static void __iomem *pic32_clk_iobase;
+static DEFINE_SPINLOCK(lock);
+
+/* FRC Postscaler */
+#define OSC_FRCDIV_MASK		0x07
+#define OSC_FRCDIV_SHIFT	24
+
+/* SPLL fields */
+#define PLL_ICLK_MASK		0x01
+#define PLL_ICLK_SHIFT		7
+
+#define DECLARE_PERIPHERAL_CLOCK(__clk_name, __reg)			\
+	{								\
+		.ctrl_reg = (void __iomem *)(__reg),			\
+		.hw.init = &(struct clk_init_data){			\
+			.name = (__clk_name),				\
+			.parent_names = (const char *[]){ "sys_clk" },	\
+			.num_parents = 1,				\
+			.ops = &pic32_pbclk_ops,			\
+		},							\
+	}
+
+#define DECLARE_REFO_CLOCK(__clkid, __regs)				\
+	{								\
+		.regs = (void __iomem *)(__regs),			\
+		.hw.init = &(struct clk_init_data) {			\
+			.name = "refo" #__clkid "_clk",			\
+			.parent_names = (const char *[]) {		\
+				"sys_clk", "pb1_clk", "posc_clk",	\
+				"frc_clk", "lprc_clk", "sosc_clk",	\
+				"sys_pll", "refi" #__clkid "_clk",	\
+				"bfrc_clk",				\
+			},						\
+			.num_parents = 9,				\
+			.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE,\
+			.ops = &pic32_roclk_ops,			\
+		},							\
+		.parent_map = (const u32[]) {				\
+			0, 1, 2, 3, 4, 5, 7, 8, 9			\
+		},							\
+	}
+
+static struct pic32_ref_osc ref_clks[] = {
+	DECLARE_REFO_CLOCK(1, 0x80),
+	DECLARE_REFO_CLOCK(2, 0xa0),
+	DECLARE_REFO_CLOCK(3, 0xc0),
+	DECLARE_REFO_CLOCK(4, 0xe0),
+	DECLARE_REFO_CLOCK(5, 0x100),
+};
+
+static struct pic32_periph_clk periph_clocks[] = {
+	DECLARE_PERIPHERAL_CLOCK("pb1_clk", 0x140),
+	DECLARE_PERIPHERAL_CLOCK("pb2_clk", 0x150),
+	DECLARE_PERIPHERAL_CLOCK("pb3_clk", 0x160),
+	DECLARE_PERIPHERAL_CLOCK("pb4_clk", 0x170),
+	DECLARE_PERIPHERAL_CLOCK("pb5_clk", 0x180),
+	DECLARE_PERIPHERAL_CLOCK("pb6_clk", 0x190),
+	DECLARE_PERIPHERAL_CLOCK("cpu_clk", 0x1a0),
+};
+
+static struct pic32_sys_clk sys_mux_clk = {
+	.mux_reg = (void __iomem *)0x0,
+	.slew_reg = (void __iomem *)0x1c0,
+	.slew_div = 2, /* step of div_4 -> div_2 -> no_div */
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_clk",
+		.parent_names = (const char *[]) {
+			"frcdiv_clk", "sys_pll", "posc_clk",
+			"sosc_clk", "lprc_clk", "frcdiv_clk",
+		},
+		.num_parents = 6,
+		.ops = &pic32_sclk_ops,
+	},
+	.parent_map = (const u32[]) {
+		0, 1, 2, 4, 5, 7,
+	},
+};
+
+static struct pic32_sys_pll sys_pll = {
+	.ctrl_reg = (void __iomem *)0x020,
+	.status_reg = (void __iomem *)0x1d0,
+	.lock_mask = BIT(7),
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_pll",
+		.parent_names = (const char *[]) {
+			"spll_mux_clk"
+		},
+		.num_parents = 1,
+		.ops = &pic32_spll_ops,
+	},
+};
+
+static struct pic32_sec_osc sosc_clk = {
+	.enable_reg = (void __iomem *)0x0,
+	.status_reg = (void __iomem *)0x1d0,
+	.enable_bitmask = BIT(1),
+	.status_bitmask = BIT(4),
+	.hw.init = &(struct clk_init_data) {
+		.name = "sosc_clk",
+		.parent_names = NULL,
+		.num_parents = 0,
+		.flags = CLK_IS_ROOT,
+		.ops = &pic32_sosc_ops,
+	},
+};
+
+static int pic32_fscm_nmi(struct notifier_block *nb,
+			  unsigned long action, void *data)
+{
+	if (readl(pic32_clk_iobase) & BIT(2))
+		pr_err("pic32-clk: FSCM detected clk failure.\n");
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block failsafe_clk_notifier = {
+	.notifier_call = pic32_fscm_nmi,
+};
+
+static void pic32mzda_clock_init(struct device_node *np)
+{
+	static struct clk_onecell_data onecell_data;
+	static struct clk *clks[MAXCLKS], *pll_mux_clk;
+	const char *const pll_mux_parents[] = {"posc_clk", "frc_clk"};
+	int nr_clks = 0, i;
+
+	pic32_clk_iobase = of_io_request_and_map(np, 0, of_node_full_name(np));
+	if (IS_ERR(pic32_clk_iobase))
+		panic("pic32-clk: failed to map registers\n");
+
+	/* register fixed rate clocks */
+	clks[POSCCLK] = clk_register_fixed_rate(NULL, "posc_clk", NULL,
+						CLK_IS_ROOT, 24000000);
+	clks[FRCCLK] =  clk_register_fixed_rate(NULL, "frc_clk", NULL,
+						CLK_IS_ROOT, 8000000);
+	clks[BFRCCLK] = clk_register_fixed_rate(NULL, "bfrc_clk", NULL,
+						CLK_IS_ROOT, 8000000);
+	clks[LPRCCLK] = clk_register_fixed_rate(NULL, "lprc_clk", NULL,
+						CLK_IS_ROOT, 32000);
+	clks[UPLLCLK] = clk_register_fixed_rate(NULL, "usbphy_clk", NULL,
+						CLK_IS_ROOT, 24000000);
+	/* fixed rate (optional) clock */
+	if (of_find_property(np, "microchip,pic32mzda-sosc", NULL)) {
+		pr_info("pic32-clk: dt requests SOSC.\n");
+		clks[SOSCCLK] = pic32_sosc_clk_register(&sosc_clk,
+							pic32_clk_iobase);
+	}
+	/* divider clock */
+	clks[FRCDIVCLK] = clk_register_divider(NULL, "frcdiv_clk",
+					       "frc_clk", 0,
+					       pic32_clk_iobase,
+					       OSC_FRCDIV_SHIFT,
+					       OSC_FRCDIV_MASK,
+					       CLK_DIVIDER_POWER_OF_TWO,
+					       &lock);
+	/* PLL ICLK mux */
+	pll_mux_clk = clk_register_mux(NULL, "spll_mux_clk",
+				       pll_mux_parents, 2, 0,
+				       pic32_clk_iobase + 0x020,
+				       PLL_ICLK_SHIFT, 1, 0, &lock);
+	if (IS_ERR(pll_mux_clk))
+		panic("spll_mux_clk: clk register failed\n");
+	/* PLL */
+	clks[PLLCLK] = pic32_spll_clk_register(&sys_pll, pic32_clk_iobase);
+	/* SYSTEM clock */
+	clks[SCLK] = pic32_sys_clk_register(&sys_mux_clk, pic32_clk_iobase);
+	/* Peripheral bus clocks */
+	for (nr_clks = PB1CLK, i = 0; nr_clks <= PB7CLK; i++, nr_clks++)
+		clks[nr_clks] = pic32_periph_clk_register(&periph_clocks[i],
+							  pic32_clk_iobase);
+
+	/* Reference oscillator clock */
+	for (nr_clks = REF1CLK, i = 0; nr_clks <= REF5CLK; i++, nr_clks++)
+		clks[nr_clks] = pic32_refo_clk_register(&ref_clks[i],
+							pic32_clk_iobase);
+	/* register clkdev */
+	for (i = 0; i < nr_clks; i++) {
+		if (IS_ERR(clks[i]))
+			continue;
+		clk_register_clkdev(clks[i], NULL, __clk_get_name(clks[i]));
+	}
+	/* register clock provider */
+	onecell_data.clks = clks;
+	onecell_data.clk_num = nr_clks;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data);
+
+	/* register NMI for failsafe clock monitor */
+	register_nmi_notifier(&failsafe_clk_notifier);
+}
+
+CLK_OF_DECLARE(pic32mzda_clk, "microchip,pic32mzda-clk", pic32mzda_clock_init);
-- 
1.7.9.5

[PATCH v7 3/3] MIPS: dts: pic32: Update dts to reflect new PIC32MZDA clk binding

[Joshua Henderson]

From: Purna Chandra Mandal <purna.mandal@microchip.com>

- now clock nodes definition is merged with core .dtsi file
- only one rootclk is now part of DT
- clock clients also updated based on new binding doc

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
---
Note: Please pull this complete series through the MIPS tree.
---
 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi |  236 ---------------------------
 arch/mips/boot/dts/pic32/pic32mzda.dtsi     |   63 ++++---
 arch/mips/boot/dts/pic32/pic32mzda_sk.dts   |    5 +-
 3 files changed, 45 insertions(+), 259 deletions(-)
 delete mode 100644 arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi

diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
deleted file mode 100644
index ef13350..0000000
--- a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * Device Tree Source for PIC32MZDA clock data
- *
- * Purna Chandra Mandal <purna.mandal@microchip.com>
- * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
- *
- * Licensed under GPLv2 or later.
- */
-
-/* all fixed rate clocks */
-
-/ {
-	POSC:posc_clk { /* On-chip primary oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	FRC:frc_clk { /* internal FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <8000000>;
-	};
-
-	BFRC:bfrc_clk { /* internal backup FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <8000000>;
-	};
-
-	LPRC:lprc_clk { /* internal low-power FRC oscillator */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	/* UPLL provides clock to USBCORE */
-	UPLL:usb_phy_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "usbphy_clk";
-	};
-
-	TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <4000000>;
-		status = "disabled";
-	};
-
-	/* external clock input on REFCLKIx pin */
-	REFIx:refix_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		status = "disabled";
-	};
-
-	/* PIC32 specific clks */
-	pic32_clktree {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x1f801200 0x200>;
-		compatible = "microchip,pic32mzda-clk";
-		ranges = <0 0x1f801200 0x200>;
-
-		/* secondary oscillator; external input on SOSCI pin */
-		SOSC:sosc_clk@0 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-sosc";
-			clock-frequency = <32768>;
-			reg = <0x000 0x10>,   /* enable reg */
-			      <0x1d0 0x10>; /* status reg */
-			microchip,bit-mask = <0x02>; /* enable mask */
-			microchip,status-bit-mask = <0x10>; /* status-mask*/
-		};
-
-		FRCDIV:frcdiv_clk {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-frcdivclk";
-			clocks = <&FRC>;
-			clock-output-names = "frcdiv_clk";
-		};
-
-		/* System PLL clock */
-		SYSPLL:spll_clk@020 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-syspll";
-			reg = <0x020 0x10>, /* SPLL register */
-			      <0x1d0 0x10>; /* CLKSTAT register */
-			clocks = <&POSC>, <&FRC>;
-			clock-output-names = "sys_pll";
-			microchip,status-bit-mask = <0x80>; /* SPLLRDY */
-		};
-
-		/* system clock; mux with postdiv & slew */
-		SYSCLK:sys_clk@1c0 {
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-sysclk-v2";
-			reg = <0x1c0 0x04>; /* SLEWCON */
-			clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
-				 <&LPRC>, <&FRCDIV>;
-			microchip,clock-indices = <0>, <1>, <2>, <4>,
-						  <5>, <7>;
-			clock-output-names = "sys_clk";
-		};
-
-		/* Peripheral bus1 clock */
-		PBCLK1:pb1_clk@140 {
-			reg = <0x140 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb1_clk";
-			/* used by system modules, not gateable */
-			microchip,ignore-unused;
-		};
-
-		/* Peripheral bus2 clock */
-		PBCLK2:pb2_clk@150 {
-			reg = <0x150 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb2_clk";
-			/* avoid gating even if unused */
-			microchip,ignore-unused;
-		};
-
-		/* Peripheral bus3 clock */
-		PBCLK3:pb3_clk@160 {
-			reg = <0x160 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb3_clk";
-		};
-
-		/* Peripheral bus4 clock(I/O ports, GPIO) */
-		PBCLK4:pb4_clk@170 {
-			reg = <0x170 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb4_clk";
-		};
-
-		/* Peripheral bus clock */
-		PBCLK5:pb5_clk@180 {
-			reg = <0x180 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			clock-output-names = "pb5_clk";
-		};
-
-		/* Peripheral Bus6 clock; */
-		PBCLK6:pb6_clk@190 {
-			reg = <0x190 0x10>;
-			compatible = "microchip,pic32mzda-pbclk";
-			clocks = <&SYSCLK>;
-			#clock-cells = <0>;
-		};
-
-		/* Peripheral bus7 clock */
-		PBCLK7:pb7_clk@1a0 {
-			reg = <0x1a0 0x10>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-pbclk";
-			/* CPU is driven by this clock; so named */
-			clock-output-names = "cpu_clk";
-			clocks = <&SYSCLK>;
-		};
-
-		/* Reference Oscillator clock for SPI/I2S */
-		REFCLKO1:refo1_clk@80 {
-			reg = <0x080 0x20>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			clock-output-names = "refo1_clk";
-		};
-
-		/* Reference Oscillator clock for SQI */
-		REFCLKO2:refo2_clk@a0 {
-			reg = <0x0a0 0x20>;
-			#clock-cells = <0>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			clock-output-names = "refo2_clk";
-		};
-
-		/* Reference Oscillator clock, ADC */
-		REFCLKO3:refo3_clk@c0 {
-			reg = <0x0c0 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo3_clk";
-		};
-
-		/* Reference Oscillator clock */
-		REFCLKO4:refo4_clk@e0 {
-			reg = <0x0e0 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
-				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo4_clk";
-		};
-
-		/* Reference Oscillator clock, LCD */
-		REFCLKO5:refo5_clk@100 {
-			reg = <0x100 0x20>;
-			compatible = "microchip,pic32mzda-refoclk";
-			clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
-				 <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
-			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
-						  <5>, <7>, <8>, <9>;
-			#clock-cells = <0>;
-			clock-output-names = "refo5_clk";
-		};
-	};
-};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
index ad9e3318..5353a63 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda.dtsi
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -6,11 +6,9 @@
  * published by the Free Software Foundation.
  *
  */
-
+#include <dt-bindings/clock/microchip,pic32-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "pic32mzda-clk.dtsi"
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -50,6 +48,29 @@
 		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 	};
 
+	/* external clock input on TxCLKI pin */
+	txcki: txcki_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <4000000>;
+		status = "disabled";
+	};
+
+	/* external input on REFCLKIx pin */
+	refix: refix_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		status = "disabled";
+	};
+
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		microchip,pic32mzda-sosc;
+	};
+
 	evic: interrupt-controller@1f810000 {
 		compatible = "microchip,pic32mzda-evic";
 		interrupt-controller;
@@ -63,7 +84,7 @@
 		#size-cells = <1>;
 		compatible = "microchip,pic32mzda-pinctrl";
 		reg = <0x1f801400 0x400>;
-		clocks = <&PBCLK1>;
+		clocks = <&rootclk PB1CLK>;
 	};
 
 	/* PORTA */
@@ -75,7 +96,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <0>;
 		gpio-ranges = <&pic32_pinctrl 0 0 16>;
 	};
@@ -89,7 +110,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <1>;
 		gpio-ranges = <&pic32_pinctrl 0 16 16>;
 	};
@@ -103,7 +124,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <2>;
 		gpio-ranges = <&pic32_pinctrl 0 32 16>;
 	};
@@ -117,7 +138,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <3>;
 		gpio-ranges = <&pic32_pinctrl 0 48 16>;
 	};
@@ -131,7 +152,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <4>;
 		gpio-ranges = <&pic32_pinctrl 0 64 16>;
 	};
@@ -145,7 +166,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <5>;
 		gpio-ranges = <&pic32_pinctrl 0 80 16>;
 	};
@@ -159,7 +180,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <6>;
 		gpio-ranges = <&pic32_pinctrl 0 96 16>;
 	};
@@ -173,7 +194,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <7>;
 		gpio-ranges = <&pic32_pinctrl 0 112 16>;
 	};
@@ -189,7 +210,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <8>;
 		gpio-ranges = <&pic32_pinctrl 0 128 16>;
 	};
@@ -203,7 +224,7 @@
 		gpio-controller;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		clocks = <&PBCLK4>;
+		clocks = <&rootclk PB4CLK>;
 		microchip,gpio-bank = <9>;
 		gpio-ranges = <&pic32_pinctrl 0 144 16>;
 	};
@@ -212,7 +233,7 @@
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&REFCLKO4>, <&PBCLK5>;
+		clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
 		clock-names = "base_clk", "sys_clk";
 		bus-width = <4>;
 		cap-sd-highspeed;
@@ -225,7 +246,7 @@
 		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
 			<113 IRQ_TYPE_LEVEL_HIGH>,
 			<114 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -235,7 +256,7 @@
 		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
 			<146 IRQ_TYPE_LEVEL_HIGH>,
 			<147 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -245,7 +266,7 @@
 		interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
 			<158 IRQ_TYPE_LEVEL_HIGH>,
 			<159 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -255,7 +276,7 @@
 		interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
 			<171 IRQ_TYPE_LEVEL_HIGH>,
 			<172 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -265,7 +286,7 @@
 		interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
 			<180 IRQ_TYPE_LEVEL_HIGH>,
 			<181 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 
@@ -275,7 +296,7 @@
 		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
 			<189 IRQ_TYPE_LEVEL_HIGH>,
 			<190 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&PBCLK2>;
+		clocks = <&rootclk PB2CLK>;
 		status = "disabled";
 	};
 };
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
index 5d434a5..fc74010 100644
--- a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -95,8 +95,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdhc1>;
 	status = "okay";
-	assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>;
-	assigned-clock-rates = <50000000>,<25000000>,<40000000>;
+	assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>,
+		<&rootclk REF5CLK>;
+	assigned-clock-rates = <50000000>, <25000000>, <40000000>;
 };
 
 &pic32_pinctrl {
-- 
1.7.9.5

Re: [PATCH v7 2/3] clk: clk-pic32: Add PIC32 clock driver

[Michael Turquette]

Quoting Joshua Henderson (2016-02-19 08:25:35)
> +const struct clk_ops pic32_roclk_ops = {
> +       .enable                 = roclk_enable,
> +       .disable                = roclk_disable,
> +       .is_enabled             = roclk_is_enabled,
> +       .get_parent             = roclk_get_parent,
> +       .set_parent             = roclk_set_parent,
> +       .determine_rate         = roclk_determine_rate,
> +       .recalc_rate            = roclk_recalc_rate,
> +       .round_rate             = roclk_round_rate,
> +       .set_rate_and_parent    = roclk_set_rate_and_parent,
> +       .set_rate               = roclk_set_rate,
> +       .init                   = roclk_init,
> +};

You can remove .round_rate and only use .determine_rate.

...
> +CLK_OF_DECLARE(pic32mzda_clk, "microchip,pic32mzda-clk", pic32mzda_clock_init);

Can you make this a platform_driver instead of using CLK_OF_DECLARE? I
asked this in v6 but there was no response.

Regards,
Mike

> -- 
> 1.7.9.5
> 

Re: [PATCH v7 2/3] clk: clk-pic32: Add PIC32 clock driver

[Purna Chandra Mandal]

On 02/20/2016 01:46 AM, Michael Turquette wrote:

> Quoting Joshua Henderson (2016-02-19 08:25:35)
>> +const struct clk_ops pic32_roclk_ops = {
>> +       .enable                 = roclk_enable,
>> +       .disable                = roclk_disable,
>> +       .is_enabled             = roclk_is_enabled,
>> +       .get_parent             = roclk_get_parent,
>> +       .set_parent             = roclk_set_parent,
>> +       .determine_rate         = roclk_determine_rate,
>> +       .recalc_rate            = roclk_recalc_rate,
>> +       .round_rate             = roclk_round_rate,
>> +       .set_rate_and_parent    = roclk_set_rate_and_parent,
>> +       .set_rate               = roclk_set_rate,
>> +       .init                   = roclk_init,
>> +};
> You can remove .round_rate and only use .determine_rate.

Ack. Will remove .round_rate.

> ...
>> +CLK_OF_DECLARE(pic32mzda_clk, "microchip,pic32mzda-clk", pic32mzda_clock_init);
> Can you make this a platform_driver instead of using CLK_OF_DECLARE? I
> asked this in v6 but there was no response.

Mike,
I tried to use platform_driver approach, but didn't work for me.
On MIPS/PIC32 first call of clk_get() happens from "start_kernel -> time_init()->
plat_time_init()" which is very early in boot sequence even before execution of
early_initcall(). In short, by platform_driver way I'was not able to register clock(s)
before the first clock user becomes ready. Whereas with CLK_OF_DECLARE() I can
explicitly call of_clk_init() in plat_time_init() just before calling clk_get().

Please suggest me if you have any reference to avoid my case.

> Regards,
> Mike
>
>> -- 
>> 1.7.9.5
>>

Re: [PATCH v7 1/3] dt/bindings: Add PIC32 clock binding documentation

[Rob Herring]

On Fri, Feb 19, 2016 at 09:25:34AM -0700, Joshua Henderson wrote:
> From: Purna Chandra Mandal <purna.mandal@microchip.com>
> 
> Document the devicetree bindings for the clock driver found on Microchip
> PIC32 class devices.
> 
> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> ---
> Note: Please pull this complete series through the MIPS tree.
> 
> Changes since v6:
> 	- Update Microchip PIC32 clock binding document based on review
> 	- Add header defining clocks
> Changes since v5: None
> Changes since v4: None
> Changes since v3: None
> Changes since v2:
> 	- Force lowercase in PIC32 clock binding documentation
> Changes since v1: None
> ---
>  .../devicetree/bindings/clock/microchip,pic32.txt  |   39 ++++++++++++++++++
>  include/dt-bindings/clock/microchip,pic32-clock.h  |   42 ++++++++++++++++++++
>  2 files changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/microchip,pic32.txt
>  create mode 100644 include/dt-bindings/clock/microchip,pic32-clock.h

Acked-by: Rob Herring <robh@kernel.org>