From: Alexandre Courbot <acourbot@nvidia.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Arnd Bergmann <arnd@arndb.de>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
gnurou@gmail.com, Alexandre Courbot <acourbot@nvidia.com>
Subject: [PATCH v4 2/3] mmc: sdhci-acpi: Remove enable_dma() hook
Date: Mon, 7 Mar 2016 11:07:56 +0900 [thread overview]
Message-ID: <1457316477-8153-3-git-send-email-acourbot@nvidia.com> (raw)
In-Reply-To: <1457316477-8153-1-git-send-email-acourbot@nvidia.com>
This hook was solely used to set the DMA mask, which is now done
by the newly-added sdhci_set_dma_mask() function.
The use of a flag to ensure the mask is only set once is a strong hint
that it should not have been done there anyway.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/mmc/host/sdhci-acpi.c | 30 ------------------------------
1 file changed, 30 deletions(-)
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 195ff0853dc8..416da6f3629c 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -75,7 +75,6 @@ struct sdhci_acpi_host {
const struct sdhci_acpi_slot *slot;
struct platform_device *pdev;
bool use_runtime_pm;
- bool dma_setup;
};
static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
@@ -83,33 +82,6 @@ static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
return c->slot && (c->slot->flags & flag);
}
-static int sdhci_acpi_enable_dma(struct sdhci_host *host)
-{
- struct sdhci_acpi_host *c = sdhci_priv(host);
- struct device *dev = &c->pdev->dev;
- int err = -1;
-
- if (c->dma_setup)
- return 0;
-
- if (host->flags & SDHCI_USE_64_BIT_DMA) {
- if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
- host->flags &= ~SDHCI_USE_64_BIT_DMA;
- } else {
- err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
- if (err)
- dev_warn(dev, "Failed to set 64-bit DMA mask\n");
- }
- }
-
- if (err)
- err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-
- c->dma_setup = !err;
-
- return err;
-}
-
static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
{
u8 reg;
@@ -127,7 +99,6 @@ static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
static const struct sdhci_ops sdhci_acpi_ops_dflt = {
.set_clock = sdhci_set_clock,
- .enable_dma = sdhci_acpi_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -135,7 +106,6 @@ static const struct sdhci_ops sdhci_acpi_ops_dflt = {
static const struct sdhci_ops sdhci_acpi_ops_int = {
.set_clock = sdhci_set_clock,
- .enable_dma = sdhci_acpi_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
--
2.7.2
next prev parent reply other threads:[~2016-03-07 2:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-07 2:07 [PATCH v4 0/3] mmc: sdhci: Set DMA mask properly Alexandre Courbot
2016-03-07 2:07 ` [PATCH v4 1/3] mmc: sdhci: Set DMA mask when adding host Alexandre Courbot
2016-03-16 8:43 ` Adrian Hunter
2016-03-16 9:07 ` Arnd Bergmann
2016-03-16 9:26 ` Adrian Hunter
2016-03-16 10:05 ` Arnd Bergmann
2016-03-07 2:07 ` Alexandre Courbot [this message]
2016-03-07 2:07 ` [PATCH v4 3/3] mmc: sdhci-pci: Do not set DMA mask in enable_dma() Alexandre Courbot
2016-03-08 13:18 ` Adrian Hunter
2016-03-14 3:15 ` Alexandre Courbot
2016-03-14 13:00 ` Adrian Hunter
2016-03-14 15:52 ` Bjorn Helgaas
2016-03-16 12:46 ` [PATCH v4 0/3] mmc: sdhci: Set DMA mask properly Adrian Hunter
2016-03-16 13:09 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457316477-8153-3-git-send-email-acourbot@nvidia.com \
--to=acourbot@nvidia.com \
--cc=adrian.hunter@intel.com \
--cc=arnd@arndb.de \
--cc=gnurou@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox