linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lu Baolu <baolu.lu@linux.intel.com>
To: Felipe Balbi <balbi@kernel.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Lee Jones <lee.jones@linaro.org>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lu Baolu <baolu.lu@linux.intel.com>,
	Fengguang Wu <fengguang.wu@intel.com>
Subject: [PATCH v2 7/7] mfd: intel_vuport: Add Intel virtual USB port MFD Driver
Date: Mon,  7 Mar 2016 16:53:03 +0800	[thread overview]
Message-ID: <1457340783-1522-8-git-send-email-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <1457340783-1522-1-git-send-email-baolu.lu@linux.intel.com>

Some Intel platforms have an USB port mux controlled by GPIOs.
There's a single ACPI platform device that provides both USB ID
extcon device and a USB port mux device. This MFD driver will
split the 2 devices for their respective drivers.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
 MAINTAINERS                |  1 +
 drivers/mfd/Kconfig        |  8 +++++
 drivers/mfd/Makefile       |  1 +
 drivers/mfd/intel-vuport.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 88 insertions(+)
 create mode 100644 drivers/mfd/intel-vuport.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 399cefe..1671a4d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11408,6 +11408,7 @@ F:	drivers/usb/mux/intel-mux.c
 F:	include/linux/usb/intel-mux.h
 F:	drivers/usb/mux/intel-mux-gpio.c
 F:	drivers/usb/mux/intel-mux-drcfg.c
+F:	drivers/mfd/intel-vuport.c
 
 USB PRINTER DRIVER (usblp)
 M:	Pete Zaitcev <zaitcev@redhat.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..8dd1bf3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1534,5 +1534,13 @@ config MFD_VEXPRESS_SYSREG
 	  System Registers are the platform configuration block
 	  on the ARM Ltd. Versatile Express board.
 
+config MFD_INTEL_VUPORT
+	tristate "Intel virtual USB port controller"
+	select MFD_CORE
+	depends on X86 && ACPI
+	help
+	  Say Y here to enable support for Intel dual role port mux
+	  controlled by 3 GPIOs.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..0ccd107 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -198,3 +198,4 @@ intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 intel-soc-pmic-$(CONFIG_INTEL_PMC_IPC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
+obj-$(CONFIG_MFD_INTEL_VUPORT)	+= intel-vuport.o
diff --git a/drivers/mfd/intel-vuport.c b/drivers/mfd/intel-vuport.c
new file mode 100644
index 0000000..1371099
--- /dev/null
+++ b/drivers/mfd/intel-vuport.c
@@ -0,0 +1,78 @@
+/*
+ * MFD driver for Intel virtual USB port
+ *
+ * Copyright(c) 2016 Intel Corporation.
+ * Author: Lu Baolu <baolu.lu@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+
+/* ACPI GPIO Mappings */
+static const struct acpi_gpio_params id_gpio = { 0, 0, false };
+static const struct acpi_gpio_params vbus_gpio = { 1, 0, false };
+static const struct acpi_gpio_params mux_gpio = { 2, 0, false };
+static const struct acpi_gpio_mapping acpi_usb_gpios[] = {
+	{ "id-gpios", &id_gpio, 1 },
+	{ "vbus_en-gpios", &vbus_gpio, 1 },
+	{ "usb_mux-gpios", &mux_gpio, 1 },
+	{ },
+};
+
+static const struct mfd_cell intel_vuport_mfd_cells[] = {
+	{
+		.name = "extcon-usb-gpio",
+	},
+	{
+		.name = "intel-mux-gpio",
+	},
+};
+
+static int vuport_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_usb_gpios);
+	if (ret)
+		return ret;
+
+	return mfd_add_devices(&pdev->dev, 0, intel_vuport_mfd_cells,
+			ARRAY_SIZE(intel_vuport_mfd_cells), NULL, 0,
+			NULL);
+}
+
+static int vuport_remove(struct platform_device *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
+
+	return 0;
+}
+
+static struct acpi_device_id vuport_acpi_match[] = {
+	{ "INT3496" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, vuport_acpi_match);
+
+static struct platform_driver vuport_driver = {
+	.driver = {
+		.name = "intel-vuport",
+		.acpi_match_table = ACPI_PTR(vuport_acpi_match),
+	},
+	.probe = vuport_probe,
+	.remove = vuport_remove,
+};
+
+module_platform_driver(vuport_driver);
+
+MODULE_AUTHOR("Lu Baolu <baolu.lu@linux.intel.com>");
+MODULE_DESCRIPTION("Intel virtual USB port");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

  parent reply	other threads:[~2016-03-07  8:54 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-07  8:52 [PATCH v2 0/7] usb: add support for Intel dual role port mux Lu Baolu
2016-03-07  8:52 ` [PATCH v2 1/7] extcon: usb-gpio: add device binding for platform device Lu Baolu
2016-03-07  8:52 ` [PATCH v2 2/7] extcon: usb-gpio: add support for ACPI gpio interface Lu Baolu
2016-03-07  8:52 ` [PATCH v2 3/7] usb: mux: add common code for Intel dual role port mux Lu Baolu
2016-03-07  8:53 ` [PATCH v2 4/7] usb: mux: add driver for Intel gpio controlled " Lu Baolu
2016-03-07  8:53 ` [PATCH v2 5/7] usb: mux: add driver for Intel drcfg " Lu Baolu
2016-03-07  8:53 ` [PATCH v2 6/7] usb: pci-quirks: add Intel USB drcfg mux device Lu Baolu
2016-03-07  8:53 ` Lu Baolu [this message]
2016-03-08  4:40   ` [PATCH v2 7/7] mfd: intel_vuport: Add Intel virtual USB port MFD Driver Lee Jones
2016-03-08  7:50     ` Lu Baolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1457340783-1522-8-git-send-email-baolu.lu@linux.intel.com \
    --to=baolu.lu@linux.intel.com \
    --cc=balbi@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=fengguang.wu@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).