[PATCH 1/7] drivers/mfd: make max8925-i2c.c explicitly non-modular

[Paul Gortmaker <paul.gortmaker@windriver.com>]

The Kconfig currently controlling compilation of this code is:

drivers/mfd/Kconfig: config MFD_MAX8925
drivers/mfd/Kconfig:    bool "Maxim Semiconductor MAX8925 PMIC Support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 drivers/mfd/max8925-i2c.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index 70443b161a5b..5c80aea3211f 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/mfd/max8925.h>
@@ -133,7 +133,6 @@ static const struct i2c_device_id max8925_id_table[] = {
 	{ "max8925", 0 },
 	{ },
 };
-MODULE_DEVICE_TABLE(i2c, max8925_id_table);
 
 static int max8925_dt_init(struct device_node *np, struct device *dev,
 			   struct max8925_platform_data *pdata)
@@ -240,7 +239,6 @@ static const struct of_device_id max8925_dt_ids[] = {
 	{ .compatible = "maxim,max8925", },
 	{},
 };
-MODULE_DEVICE_TABLE(of, max8925_dt_ids);
 
 static struct i2c_driver max8925_driver = {
 	.driver	= {
@@ -264,13 +262,3 @@ static int __init max8925_i2c_init(void)
 	return ret;
 }
 subsys_initcall(max8925_i2c_init);
-
-static void __exit max8925_i2c_exit(void)
-{
-	i2c_del_driver(&max8925_driver);
-}
-module_exit(max8925_i2c_exit);
-
-MODULE_DESCRIPTION("I2C Driver for Maxim 8925");
-MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
-MODULE_LICENSE("GPL");
-- 
2.8.0