[PATCH v11 19/60] PCI: Set resource to FIXED for LSI devices

[Yinghai Lu <yinghai@kernel.org>]

LSI HBA firmware stop responding pci read from host if pci core ever change
pci device BAR values.

Set their resources to FIXED, so let realloc to skip them.

v2: check if start is 0.

Reported-by: Paul Johnson <pjay@nwtrail.com>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=92351
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@vger.kernel.org
---
 drivers/pci/pci.h       |  1 +
 drivers/pci/quirks.c    | 20 ++++++++++++++++++++
 drivers/pci/setup-bus.c |  4 ++++
 3 files changed, 25 insertions(+)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 90e6e3e..0ac4229 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -170,6 +170,7 @@ static inline void pci_msix_clear_and_set_ctrl(struct pci_dev *dev, u16 clear, u
 }
 
 void pci_realloc_get_opt(char *);
+bool pci_realloc_user_enabled(void);
 
 static inline int pci_no_d1d2(struct pci_dev *dev)
 {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d11af7f..a7cd617 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -335,6 +335,26 @@ static void quirk_s3_64M(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_868,		quirk_s3_64M);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3,	PCI_DEVICE_ID_S3_968,		quirk_s3_64M);
 
+/*
+ * LSI devices firmware does not like BAR get changed
+ */
+static void quirk_bar_fixed(struct pci_dev *dev)
+{
+	int i;
+
+	if (pci_realloc_user_enabled())
+		return;
+
+	for (i = 0; i < PCI_STD_RESOURCE_END; i++) {
+		struct resource *r = &dev->resource[i];
+
+		if (!r->start || !r->flags)
+			continue;
+		r->flags |= IORESOURCE_PCI_FIXED;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC,	PCI_ANY_ID,	quirk_bar_fixed);
+
 /* for pci remove and rescan */
 static void quirk_allocate_fixed(struct pci_dev *dev)
 {
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 815d2de..6385cf7 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -1677,6 +1677,10 @@ void __init pci_realloc_get_opt(char *str)
 	else if (!strncmp(str, "on", 2))
 		pci_realloc_enable = user_enabled;
 }
+bool pci_realloc_user_enabled(void)
+{
+	return pci_realloc_enable == user_enabled;
+}
 static bool pci_realloc_enabled(enum enable_type enable)
 {
 	return enable >= user_enabled;
-- 
1.8.4.5