[PATCH v9 1/7] regulator: fixed: add support for ACPI interface

Lu Baolu
2016-05-30T05:54:33Z

Add support to retrieve fixed voltage configure information through
ACPI interface. This is needed for Intel Bay Trail devices, where a
GPIO is used to control the USB vbus.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/regulator/fixed.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index ff62d69..207ab40 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -30,6 +30,9 @@
#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
+#include <linux/acpi.h>
+#include <linux/property.h>
+#include <linux/gpio/consumer.h>

struct fixed_voltage_data {
struct regulator_desc desc;
@@ -104,6 +107,44 @@ of_get_fixed_voltage_config(struct device *dev,
return config;
}

+/**
+ * acpi_get_fixed_voltage_config - extract fixed_voltage_config structure info
+ * @dev: device requesting for fixed_voltage_config
+ * @desc: regulator description
+ *
+ * Populates fixed_voltage_config structure by extracting data through ACPI
+ * interface, returns a pointer to the populated structure of NULL if memory
+ * alloc fails.
+ */
+static struct fixed_voltage_config *
+acpi_get_fixed_voltage_config(struct device *dev,
+ const struct regulator_desc *desc)
+{
+ struct fixed_voltage_config *config;
+ const char *supply_name;
+ struct gpio_desc *gpiod;
+ int ret;
+
+ config = devm_kzalloc(dev, sizeof(*config), GFP_KERNEL);
+ if (!config)
+ return ERR_PTR(-ENOMEM);
+
+ ret = device_property_read_string(dev, "supply-name", &supply_name);
+ if (!ret)
+ config->supply_name = supply_name;
+
+ gpiod = gpiod_get(dev, "gpio", GPIOD_ASIS);
+ if (IS_ERR(gpiod))
+ return ERR_PTR(-ENODEV);
+
+ config->gpio = desc_to_gpio(gpiod);
+ config->enable_high = device_property_read_bool(dev,
+ "enable-active-high");
+ gpiod_put(gpiod);
+
+ return config;
+}
+
static struct regulator_ops fixed_voltage_ops = {
};

@@ -124,6 +165,11 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
&drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
+ } else if (ACPI_HANDLE(&pdev->dev)) {
+ config = acpi_get_fixed_voltage_config(&pdev->dev,
+ &drvdata->desc);
+ if (IS_ERR(config))
+ return PTR_ERR(config);
} else {
config = dev_get_platdata(&pdev->dev);
}
--
2.1.4