public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: linux-kernel@vger.kernel.org, p.zabel@pengutronix.de,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	xing.xu@amlogic.com, victor.wan@amlogic.com,
	jerry.cao@amlogic.com
Subject: [PATCH v3 1/4] reset: Add support for the Amlogic Meson SoC Reset Controller
Date: Mon, 30 May 2016 15:27:15 +0200	[thread overview]
Message-ID: <1464614838-28107-2-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1464614838-28107-1-git-send-email-narmstrong@baylibre.com>

This patch adds the platform driver for the Amlogic Meson SoC Reset
Controller.

The Meson8b and GXBB SoCs are supported.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/reset/Makefile      |   1 +
 drivers/reset/reset-meson.c | 136 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 137 insertions(+)
 create mode 100644 drivers/reset/reset-meson.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index f173fc3..03dc1bb 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
+obj-$(CONFIG_ARCH_MESON) += reset-meson.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
new file mode 100644
index 0000000..c32f11a
--- /dev/null
+++ b/drivers/reset/reset-meson.c
@@ -0,0 +1,136 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called COPYING.
+ *
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *   * Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *   * Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in
+ *     the documentation and/or other materials provided with the
+ *     distribution.
+ *   * Neither the name of Intel Corporation nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define REG_COUNT	8
+#define BITS_PER_REG	32
+
+struct meson_reset {
+	void __iomem *reg_base;
+	struct reset_controller_dev rcdev;
+};
+
+static int meson_reset_reset(struct reset_controller_dev *rcdev,
+			      unsigned long id)
+{
+	struct meson_reset *data =
+		container_of(rcdev, struct meson_reset, rcdev);
+	unsigned int bank = id / BITS_PER_REG;
+	unsigned int offset = id % BITS_PER_REG;
+	void __iomem *reg_addr = data->reg_base + (bank << 2);
+
+	if (bank >= REG_COUNT)
+		return -EINVAL;
+
+	writel(BIT(offset), reg_addr);
+
+	return 0;
+}
+
+static const struct reset_control_ops meson_reset_ops = {
+	.reset		= meson_reset_reset,
+};
+
+static const struct of_device_id meson_reset_dt_ids[] = {
+	 { .compatible = "amlogic,meson8b-reset", },
+	 { .compatible = "amlogic,meson-gxbb-reset", },
+	 { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
+
+static int meson_reset_probe(struct platform_device *pdev)
+{
+	struct meson_reset *data;
+	struct resource *res;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_base))
+		return PTR_ERR(data->reg_base);
+
+	platform_set_drvdata(pdev, data);
+
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG;
+	data->rcdev.ops = &meson_reset_ops;
+	data->rcdev.of_node = pdev->dev.of_node;
+
+	return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+}
+
+static struct platform_driver meson_reset_driver = {
+	.probe	= meson_reset_probe,
+	.driver = {
+		.name		= "meson_reset",
+		.of_match_table	= meson_reset_dt_ids,
+	},
+};
+
+module_platform_driver(meson_reset_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
+MODULE_LICENSE("Dual BSD/GPL");
-- 
2.7.0

  reply	other threads:[~2016-05-30 13:27 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-30 13:27 [PATCH v3 0/4] Amlogic: Meson: Add reset controller Neil Armstrong
2016-05-30 13:27 ` Neil Armstrong [this message]
2016-05-30 13:27 ` [PATCH v3 2/4] dt-bindings: reset: Add bindings for the Meson SoC Reset Controller Neil Armstrong
2016-05-30 13:27 ` [PATCH v3 3/4] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms Neil Armstrong
2016-05-30 13:27 ` [PATCH v3 4/4] ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms Neil Armstrong
2016-06-01 14:08 ` [PATCH v3 0/4] Amlogic: Meson: Add reset controller Philipp Zabel
2016-06-01 17:43   ` Kevin Hilman
2016-06-02  7:42 ` Philipp Zabel
2016-08-18  2:15   ` Kevin Hilman
2016-08-18  2:28     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464614838-28107-2-git-send-email-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=jerry.cao@amlogic.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=victor.wan@amlogic.com \
    --cc=xing.xu@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox