[PATCH 4/5] drivers: input: powerkey for HISI 65xx SoC

John Stultz
2016-06-03T22:12:36Z

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

This driver provides a input driver for the power button on the
HiSi 65xx SoC for boards like HiKey.

This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com>
then basically rewritten by Jorge, but preserving the original
module author credits.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
[jstultz: Reworked commit message, folded in other fixes/cleanups
from Jorge, implemented some larger cleanups suggested by DmitryT]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/input/misc/Kconfig | 9 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/hisi_powerkey.c | 155 +++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/input/misc/hisi_powerkey.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 1f2337a..07aacfc 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -796,4 +796,13 @@ config INPUT_DRV2667_HAPTICS
To compile this driver as a module, choose M here: the
module will be called drv2667-haptics.

+config HISI_POWERKEY
+ tristate "Hisilicon PMIC ONKEY support"
+ depends on ARCH_HISI || COMPILE_TEST
+ help
+ Say Y to enable support for PMIC ONKEY.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hisi_powerkey.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 0357a08..f264777 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -75,3 +75,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
+obj-$(CONFIG_HISI_POWERKEY) += hisi_powerkey.o
diff --git a/drivers/input/misc/hisi_powerkey.c b/drivers/input/misc/hisi_powerkey.c
new file mode 100644
index 0000000..270b881
--- /dev/null
+++ b/drivers/input/misc/hisi_powerkey.c
@@ -0,0 +1,155 @@
+/*
+ * Hisilicon PMIC powerkey driver
+ *
+ * Copyright (C) 2013 Hisilicon Ltd.
+ * Copyright (C) 2015, 2016 Linaro Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+/* the held interrupt will trigger after 4 seconds */
+#define MAX_HELD_TIME (4 * MSEC_PER_SEC)
+
+
+enum id_action { ID_PRESSED, ID_RELEASED, ID_HELD, ID_LAST };
+const char *const irq_names[ID_LAST] = {"down", "up", "hold 4s"};
+
+struct hi65xx_priv {
+ struct input_dev *input;
+};
+
+static irqreturn_t hi65xx_power_press_isr(int irq, void *q)
+{
+ struct hi65xx_priv *p = q;
+
+ pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+ input_report_key(p->input, KEY_POWER, 1);
+ input_sync(p->input);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hi65xx_power_release_isr(int irq, void *q)
+{
+ struct hi65xx_priv *p = q;
+
+ pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+ input_report_key(p->input, KEY_POWER, 0);
+ input_sync(p->input);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t hi65xx_restart_toggle_isr(int irq, void *q)
+{
+ struct hi65xx_priv *p = q;
+ int value = test_bit(KEY_RESTART, p->input->key);
+
+ pm_wakeup_event(p->input->dev.parent, MAX_HELD_TIME);
+ input_report_key(p->input, KEY_RESTART, !value);
+ input_sync(p->input);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t (*irq_handlers[ID_LAST])(int irq, void *q) = {
+ hi65xx_power_press_isr,
+ hi65xx_power_release_isr,
+ hi65xx_restart_toggle_isr,
+};
+
+static int hi65xx_powerkey_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hi65xx_priv *priv;
+ int irq, i, ret;
+
+ priv = devm_kzalloc(dev, sizeof(struct hi65xx_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->input = devm_input_allocate_device(&pdev->dev);
+ if (!priv->input) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ priv->input->phys = "hisi_on/input0";
+ priv->input->name = "HISI 65xx PowerOn Key";
+
+ input_set_capability(priv->input, EV_KEY, KEY_POWER);
+ input_set_capability(priv->input, EV_KEY, KEY_RESTART);
+
+ for (i = 0; i < ID_LAST; i++) {
+
+ irq = platform_get_irq_byname(pdev, irq_names[i]);
+ if (irq < 0) {
+ dev_err(dev, "couldn't get irq %s\n", irq_names[i]);
+ return irq;
+ }
+
+ ret = devm_request_any_context_irq(dev, irq,
+ irq_handlers[i], IRQF_ONESHOT,
+ irq_names[i], priv);
+ if (ret < 0) {
+ dev_err(dev, "couldn't get irq %s\n", irq_names[i]);
+ return ret;
+ }
+ }
+
+ ret = input_register_device(priv->input);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register input device: %d\n",
+ ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+}
+
+static int hi65xx_powerkey_remove(struct platform_device *pdev)
+{
+ device_init_wakeup(&pdev->dev, 0);
+ return 0;
+}
+
+static const struct of_device_id hi65xx_powerkey_of_match[] = {
+ { .compatible = "hisilicon,hi6552-powerkey", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hi65xx_powerkey_of_match);
+
+static struct platform_driver hi65xx_powerkey_driver = {
+ .driver = {
+ .name = "hi65xx-powerkey",
+ .of_match_table = of_match_ptr(hi65xx_powerkey_of_match),
+ },
+ .probe = hi65xx_powerkey_probe,
+ .remove = hi65xx_powerkey_remove,
+};
+
+module_platform_driver(hi65xx_powerkey_driver);
+
+MODULE_AUTHOR("Zhiliang Xue <xuezhiliang@huawei.com");
+MODULE_DESCRIPTION("Hisi PMIC Power key driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1