public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Tomas Winkler <tomas.winkler@intel.com>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/1] mei: me: use managed functions pcim_* and devm_*
Date: Sun, 05 Jun 2016 17:49:44 +0300	[thread overview]
Message-ID: <1465138184.1767.80.camel@linux.intel.com> (raw)
In-Reply-To: <1454335233-122281-1-git-send-email-andriy.shevchenko@linux.intel.com>

On Mon, 2016-02-01 at 16:00 +0200, Andy Shevchenko wrote:
> This makes the error handling much more simpler than open-coding
> everything and
> in addition makes the probe function smaller an tidier.
> 

It's already one release cycle passed. What is the destiny of this
change?

> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/misc/mei/hw-me.c  |  4 ++--
>  drivers/misc/mei/pci-me.c | 40 ++++++++----------------------------
> ----
>  2 files changed, 10 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
> index 25b1997..e26c4f4 100644
> --- a/drivers/misc/mei/hw-me.c
> +++ b/drivers/misc/mei/hw-me.c
> @@ -1336,8 +1336,8 @@ struct mei_device *mei_me_dev_init(struct
> pci_dev *pdev,
>  	struct mei_device *dev;
>  	struct mei_me_hw *hw;
>  
> -	dev = kzalloc(sizeof(struct mei_device) +
> -			 sizeof(struct mei_me_hw), GFP_KERNEL);
> +	dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
> +				       sizeof(struct mei_me_hw),
> GFP_KERNEL);
>  	if (!dev)
>  		return NULL;
>  	hw = to_me_hw(dev);
> diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
> index 75fc9c6..3c07a02 100644
> --- a/drivers/misc/mei/pci-me.c
> +++ b/drivers/misc/mei/pci-me.c
> @@ -142,7 +142,7 @@ static int mei_me_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
>  		return -ENODEV;
>  
>  	/* enable pci dev */
> -	err = pci_enable_device(pdev);
> +	err = pcim_enable_device(pdev);
>  	if (err) {
>  		dev_err(&pdev->dev, "failed to enable pci
> device.\n");
>  		goto end;
> @@ -153,7 +153,7 @@ static int mei_me_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
>  	err = pci_request_regions(pdev, KBUILD_MODNAME);
>  	if (err) {
>  		dev_err(&pdev->dev, "failed to get pci regions.\n");
> -		goto disable_device;
> +		goto end;
>  	}
>  
>  	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
> @@ -166,23 +166,22 @@ static int mei_me_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
>  	}
>  	if (err) {
>  		dev_err(&pdev->dev, "No usable DMA configuration,
> aborting\n");
> -		goto release_regions;
> +		goto end;
>  	}
>  
> -
>  	/* allocates and initializes the mei dev structure */
>  	dev = mei_me_dev_init(pdev, cfg);
>  	if (!dev) {
>  		err = -ENOMEM;
> -		goto release_regions;
> +		goto end;
>  	}
>  	hw = to_me_hw(dev);
>  	/* mapping  IO device memory */
> -	hw->mem_addr = pci_iomap(pdev, 0, 0);
> +	hw->mem_addr = pcim_iomap(pdev, 0, 0);
>  	if (!hw->mem_addr) {
>  		dev_err(&pdev->dev, "mapping I/O device memory
> failure.\n");
>  		err = -ENOMEM;
> -		goto free_device;
> +		goto end;
>  	}
>  	pci_enable_msi(pdev);
>  
> @@ -196,7 +195,7 @@ static int mei_me_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
>  	if (err) {
>  		dev_err(&pdev->dev, "request_threaded_irq failure.
> irq = %d\n",
>  		       pdev->irq);
> -		goto disable_msi;
> +		goto end;
>  	}
>  
>  	if (mei_start(dev)) {
> @@ -235,15 +234,6 @@ release_irq:
>  	mei_cancel_work(dev);
>  	mei_disable_interrupts(dev);
>  	free_irq(pdev->irq, dev);
> -disable_msi:
> -	pci_disable_msi(pdev);
> -	pci_iounmap(pdev, hw->mem_addr);
> -free_device:
> -	kfree(dev);
> -release_regions:
> -	pci_release_regions(pdev);
> -disable_device:
> -	pci_disable_device(pdev);
>  end:
>  	dev_err(&pdev->dev, "initialization failed.\n");
>  	return err;
> @@ -260,7 +250,6 @@ end:
>  static void mei_me_remove(struct pci_dev *pdev)
>  {
>  	struct mei_device *dev;
> -	struct mei_me_hw *hw;
>  
>  	dev = pci_get_drvdata(pdev);
>  	if (!dev)
> @@ -269,9 +258,6 @@ static void mei_me_remove(struct pci_dev *pdev)
>  	if (mei_pg_is_enabled(dev))
>  		pm_runtime_get_noresume(&pdev->dev);
>  
> -	hw = to_me_hw(dev);
> -
> -
>  	dev_dbg(&pdev->dev, "stop\n");
>  	mei_stop(dev);
>  
> @@ -282,20 +268,10 @@ static void mei_me_remove(struct pci_dev *pdev)
>  	mei_disable_interrupts(dev);
>  
>  	free_irq(pdev->irq, dev);
> -	pci_disable_msi(pdev);
> -
> -	if (hw->mem_addr)
> -		pci_iounmap(pdev, hw->mem_addr);
>  
>  	mei_deregister(dev);
> -
> -	kfree(dev);
> -
> -	pci_release_regions(pdev);
> -	pci_disable_device(pdev);
> -
> -
>  }
> +
>  #ifdef CONFIG_PM_SLEEP
>  static int mei_me_pci_suspend(struct device *device)
>  {

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

  reply	other threads:[~2016-06-05 14:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-01 14:00 [PATCH v1 1/1] mei: me: use managed functions pcim_* and devm_* Andy Shevchenko
2016-06-05 14:49 ` Andy Shevchenko [this message]
2016-10-14 13:23   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465138184.1767.80.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox