public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: riel@redhat.com
To: linux-kernel@vger.kernel.org
Cc: kernellwp@gmail.com, mingo@kernel.org, peterz@infradead.org,
	tglx@linutronix.de, fweisbec@redhat.com
Subject: [PATCH 4/5] irqtime: add irq type parameter to irqtime_account_irq
Date: Tue,  7 Jun 2016 22:30:03 -0400	[thread overview]
Message-ID: <1465353004-15044-5-git-send-email-riel@redhat.com> (raw)
In-Reply-To: <1465353004-15044-1-git-send-email-riel@redhat.com>

From: Rik van Riel <riel@redhat.com>

Add an irq type parameter and documentation to irqtime_account_irq,
this can be used to distinguish between transitioning from process
context to hardirq time, and from process context to softirq time.

This is necessary to be able to remove the local_irq_disable from
irqtime_account_irq.

Signed-off-by: Rik van Riel <riel@redhat.com>
---
 include/linux/hardirq.h | 20 ++++++++++----------
 include/linux/vtime.h   | 12 ++++++------
 kernel/sched/cputime.c  |  9 ++++++++-
 kernel/softirq.c        |  6 +++---
 4 files changed, 27 insertions(+), 20 deletions(-)

diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index dfd59d6bc6f0..1ebb31f56285 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -32,11 +32,11 @@ extern void rcu_nmi_exit(void);
  * always balanced, so the interrupted value of ->hardirq_context
  * will always be restored.
  */
-#define __irq_enter()					\
-	do {						\
-		account_irq_enter_time(current);	\
-		preempt_count_add(HARDIRQ_OFFSET);	\
-		trace_hardirq_enter();			\
+#define __irq_enter()							\
+	do {								\
+		account_irq_enter_time(current, HARDIRQ_OFFSET);	\
+		preempt_count_add(HARDIRQ_OFFSET);			\
+		trace_hardirq_enter();					\
 	} while (0)
 
 /*
@@ -47,11 +47,11 @@ extern void irq_enter(void);
 /*
  * Exit irq context without processing softirqs:
  */
-#define __irq_exit()					\
-	do {						\
-		trace_hardirq_exit();			\
-		account_irq_exit_time(current);		\
-		preempt_count_sub(HARDIRQ_OFFSET);	\
+#define __irq_exit()							\
+	do {								\
+		trace_hardirq_exit();					\
+		account_irq_exit_time(current, HARDIRQ_OFFSET);		\
+		preempt_count_sub(HARDIRQ_OFFSET);			\
 	} while (0)
 
 /*
diff --git a/include/linux/vtime.h b/include/linux/vtime.h
index 3b384bf5ce1a..58f036f3ebea 100644
--- a/include/linux/vtime.h
+++ b/include/linux/vtime.h
@@ -112,21 +112,21 @@ static inline void vtime_account_irq_enter(struct task_struct *tsk)
 #endif
 
 #ifdef CONFIG_IRQ_TIME_ACCOUNTING
-extern void irqtime_account_irq(struct task_struct *tsk);
+extern void irqtime_account_irq(struct task_struct *tsk, int irqtype);
 #else
-static inline void irqtime_account_irq(struct task_struct *tsk) { }
+static inline void irqtime_account_irq(struct task_struct *tsk, int irqtype) { }
 #endif
 
-static inline void account_irq_enter_time(struct task_struct *tsk)
+static inline void account_irq_enter_time(struct task_struct *tsk, int irqtype)
 {
 	vtime_account_irq_enter(tsk);
-	irqtime_account_irq(tsk);
+	irqtime_account_irq(tsk, irqtype);
 }
 
-static inline void account_irq_exit_time(struct task_struct *tsk)
+static inline void account_irq_exit_time(struct task_struct *tsk, int irqtype)
 {
 	vtime_account_irq_exit(tsk);
-	irqtime_account_irq(tsk);
+	irqtime_account_irq(tsk, irqtype);
 }
 
 #endif /* _LINUX_KERNEL_VTIME_H */
diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c
index 2f862dfdb520..e009077aeab6 100644
--- a/kernel/sched/cputime.c
+++ b/kernel/sched/cputime.c
@@ -46,8 +46,15 @@ DEFINE_PER_CPU(seqcount_t, irq_time_seq);
 /*
  * Called before incrementing preempt_count on {soft,}irq_enter
  * and before decrementing preempt_count on {soft,}irq_exit.
+ *
+ * There are six possible transitions:
+ * process -> softirq, softirq -> process
+ * process -> hardirq, hardirq -> process
+ * softirq -> hardirq, hardirq -> softirq
+ *
+ * When exiting hardirq or softirq time, account the elapsed time.
  */
-void irqtime_account_irq(struct task_struct *curr)
+void irqtime_account_irq(struct task_struct *curr, int irqtype)
 {
 	unsigned long flags;
 	s64 delta;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 17caf4b63342..a311c9622c86 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -245,7 +245,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
 	current->flags &= ~PF_MEMALLOC;
 
 	pending = local_softirq_pending();
-	account_irq_enter_time(current);
+	account_irq_enter_time(current, SOFTIRQ_OFFSET);
 
 	__local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
 	in_hardirq = lockdep_softirq_start();
@@ -295,7 +295,7 @@ asmlinkage __visible void __softirq_entry __do_softirq(void)
 	}
 
 	lockdep_softirq_end(in_hardirq);
-	account_irq_exit_time(current);
+	account_irq_exit_time(current, SOFTIRQ_OFFSET);
 	__local_bh_enable(SOFTIRQ_OFFSET);
 	WARN_ON_ONCE(in_interrupt());
 	tsk_restore_flags(current, old_flags, PF_MEMALLOC);
@@ -385,7 +385,7 @@ void irq_exit(void)
 	WARN_ON_ONCE(!irqs_disabled());
 #endif
 
-	account_irq_exit_time(current);
+	account_irq_exit_time(current, HARDIRQ_OFFSET);
 	preempt_count_sub(HARDIRQ_OFFSET);
 	if (!in_interrupt() && local_softirq_pending())
 		invoke_softirq();
-- 
2.5.5

  parent reply	other threads:[~2016-06-08  3:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08  2:29 [PATCH RFC 0/5] sched,time: make irq time accounting work for nohz_idle riel
2016-06-08  2:30 ` [PATCH 1/5] sched,time: count actually elapsed irq & softirq time riel
2016-06-08  2:30 ` [PATCH 2/5] nohz,cputime: remove VTIME_GEN vtime irq time code riel
2016-06-08  2:30 ` [PATCH 3/5] cputime: allow irq time accounting to be selected as an option riel
2016-06-08  2:30 ` riel [this message]
2016-06-08  2:30 ` [PATCH 5/5] irqtime: drop local_irq_save/restore from irqtime_account_irq riel
  -- strict thread matches above, loose matches on Subject: below --
2016-06-16 16:06 [PATCH 0/5] sched,time: fix irq time accounting with nohz_idle riel
2016-06-16 16:06 ` [PATCH 4/5] irqtime: add irq type parameter to irqtime_account_irq riel
2016-06-23  2:25 [PATCH v2 0/5] sched,time: fix irq time accounting with nohz_idle riel
2016-06-23  2:25 ` [PATCH 4/5] irqtime: add irq type parameter to irqtime_account_irq riel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1465353004-15044-5-git-send-email-riel@redhat.com \
    --to=riel@redhat.com \
    --cc=fweisbec@redhat.com \
    --cc=kernellwp@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox