From: Andi Kleen <andi@firstfloor.org>
To: acme@kernel.org
Cc: linux-kernel@vger.kernel.org, jolsa@kernel.org,
Andi Kleen <ak@linux.intel.com>,
adrian.hunter@intel.com
Subject: [PATCH 1/2] perf pt: Mark PT return events as "return"
Date: Fri, 10 Jun 2016 15:55:00 -0700 [thread overview]
Message-ID: <1465599301-4240-1-git-send-email-andi@firstfloor.org> (raw)
From: Andi Kleen <ak@linux.intel.com>
With perf script --itrace=cr we can synthesize calls and returns out of
a PT log. However both calls and returns are marked with the same event,
called branches. This makes it difficult to read and post process,
because calls and returns are somewhat diffferent.
Create a separate return event and mark the returns as return.
Cc: adrian.hunter@intel.com
v2:
Add extra filter for returns.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
tools/perf/util/intel-pt.c | 61 ++++++++++++++++++++++++++++++++++++++++------
1 file changed, 54 insertions(+), 7 deletions(-)
diff --git a/tools/perf/util/intel-pt.c b/tools/perf/util/intel-pt.c
index 137196990012..c72b9074e86e 100644
--- a/tools/perf/util/intel-pt.c
+++ b/tools/perf/util/intel-pt.c
@@ -82,9 +82,13 @@ struct intel_pt {
u64 instructions_id;
bool sample_branches;
+ bool sample_returns;
u32 branches_filter;
u64 branches_sample_type;
+ u64 returns_sample_type;
+ u32 returns_filter;
u64 branches_id;
+ u64 returns_id;
bool sample_transactions;
u64 transactions_sample_type;
@@ -960,7 +964,9 @@ static int intel_pt_inject_event(union perf_event *event,
return perf_event__synthesize_sample(event, type, 0, sample, swapped);
}
-static int intel_pt_synth_branch_sample(struct intel_pt_queue *ptq)
+static int intel_pt_synth_branch_sample(struct intel_pt_queue *ptq,
+ bool is_return,
+ u32 filter)
{
int ret;
struct intel_pt *pt = ptq->pt;
@@ -971,7 +977,7 @@ static int intel_pt_synth_branch_sample(struct intel_pt_queue *ptq)
struct branch_entry entries;
} dummy_bs;
- if (pt->branches_filter && !(pt->branches_filter & ptq->flags))
+ if (filter && !(filter & ptq->flags))
return 0;
if (pt->synth_opts.initial_skip &&
@@ -990,8 +996,13 @@ static int intel_pt_synth_branch_sample(struct intel_pt_queue *ptq)
sample.pid = ptq->pid;
sample.tid = ptq->tid;
sample.addr = ptq->state->to_ip;
- sample.id = ptq->pt->branches_id;
- sample.stream_id = ptq->pt->branches_id;
+ if (is_return) {
+ sample.id = ptq->pt->returns_id;
+ sample.stream_id = ptq->pt->returns_id;
+ } else {
+ sample.id = ptq->pt->branches_id;
+ sample.stream_id = ptq->pt->branches_id;
+ }
sample.period = 1;
sample.cpu = ptq->cpu;
sample.flags = ptq->flags;
@@ -1014,6 +1025,8 @@ static int intel_pt_synth_branch_sample(struct intel_pt_queue *ptq)
if (pt->synth_opts.inject) {
ret = intel_pt_inject_event(event, &sample,
+ is_return ?
+ pt->returns_sample_type :
pt->branches_sample_type,
pt->synth_needs_swap);
if (ret)
@@ -1241,7 +1254,15 @@ static int intel_pt_sample(struct intel_pt_queue *ptq)
thread_stack__set_trace_nr(ptq->thread, state->trace_nr);
if (pt->sample_branches) {
- err = intel_pt_synth_branch_sample(ptq);
+ err = intel_pt_synth_branch_sample(ptq, false,
+ pt->branches_filter);
+ if (err)
+ return err;
+ }
+
+ if (pt->sample_returns) {
+ err = intel_pt_synth_branch_sample(ptq, true,
+ pt->returns_filter);
if (err)
return err;
}
@@ -1956,7 +1977,33 @@ static int intel_pt_synth_events(struct intel_pt *pt,
}
pt->sample_branches = true;
pt->branches_sample_type = attr.sample_type;
- pt->branches_id = id;
+ pt->branches_id = id++;
+ }
+ if (pt->synth_opts.returns) {
+ attr.config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS;
+ attr.sample_period = 1;
+ attr.sample_type |= PERF_SAMPLE_ADDR;
+ attr.sample_type &= ~(u64)PERF_SAMPLE_CALLCHAIN;
+ attr.sample_type &= ~(u64)PERF_SAMPLE_BRANCH_STACK;
+ pr_debug("Synthesizing 'return' event with id %" PRIu64 " sample type %#" PRIx64 "\n",
+ id, (u64)attr.sample_type);
+ err = intel_pt_synth_event(session, &attr, id);
+ if (err) {
+ pr_err("%s: failed to synthesize 'return' event type\n",
+ __func__);
+ return err;
+ }
+ pt->sample_returns = true;
+ pt->returns_sample_type = attr.sample_type;
+ pt->returns_id = id;
+ evlist__for_each(evlist, evsel) {
+ if (evsel->id && evsel->id[0] == pt->returns_id) {
+ if (evsel->name)
+ zfree(&evsel->name);
+ evsel->name = strdup("return");
+ break;
+ }
+ }
}
pt->synth_needs_swap = evsel->needs_swap;
@@ -2155,7 +2202,7 @@ int intel_pt_process_auxtrace_info(union perf_event *event,
pt->branches_filter |= PERF_IP_FLAG_CALL | PERF_IP_FLAG_ASYNC |
PERF_IP_FLAG_TRACE_END;
if (pt->synth_opts.returns)
- pt->branches_filter |= PERF_IP_FLAG_RETURN |
+ pt->returns_filter |= PERF_IP_FLAG_RETURN |
PERF_IP_FLAG_TRACE_BEGIN;
if (pt->synth_opts.callchain && !symbol_conf.use_callchain) {
--
2.5.5
next reply other threads:[~2016-06-10 22:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-10 22:55 Andi Kleen [this message]
2016-06-10 22:55 ` [PATCH 2/2] perf script: Support callindent Andi Kleen
2016-06-16 12:41 ` Adrian Hunter
2016-06-16 12:38 ` [PATCH 1/2] perf pt: Mark PT return events as "return" Adrian Hunter
-- strict thread matches above, loose matches on Subject: below --
2016-05-20 19:52 Andi Kleen
2016-05-23 12:05 ` Adrian Hunter
2016-05-24 0:50 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465599301-4240-1-git-send-email-andi@firstfloor.org \
--to=andi@firstfloor.org \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=ak@linux.intel.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox