From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753457AbcGGRSW (ORCPT ); Thu, 7 Jul 2016 13:18:22 -0400 Received: from mail-oi0-f67.google.com ([209.85.218.67]:32856 "EHLO mail-oi0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932238AbcGGRSB (ORCPT ); Thu, 7 Jul 2016 13:18:01 -0400 From: Franklin S Cooper Jr To: tony@atomide.com, robh+dt@kernel.org, broonie@kernel.org, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, andy.shevchenko@gmail.com, robert.jarzmik@free.fr, nsekhar@ti.com Cc: Franklin S Cooper Jr Subject: [RFC] [PATCH v3 4/4] ARM: dts: am335x-icev2: Add SPI based NOR Date: Thu, 7 Jul 2016 12:17:51 -0500 Message-Id: <1467911871-4508-5-git-send-email-fcooper@ti.com> X-Mailer: git-send-email 2.7.0 In-Reply-To: <1467911871-4508-1-git-send-email-fcooper@ti.com> References: <1467911871-4508-1-git-send-email-fcooper@ti.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Enable support for W25Q64CVSSIG which is a Winbond 64 Mbit SPI NOR. At boot you will see the following message: m25p80 spi1.0: found s25fl064k, expected w25q64 This is because the JEDEC ID for this chip is the same as s25fl064k. However, this should be harmless since both chips are essentially the same. Signed-off-by: Franklin S Cooper Jr --- arch/arm/boot/dts/am335x-icev2.dts | 39 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index e271013..e4d2d13 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -208,6 +208,45 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_default>; + + spi_nor: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q64", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "u-boot"; + reg = <0x80000 0x100000>; + read-only; + }; + + partition@2 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + read-only; + }; + + partition@3 { + label = "misc"; + reg = <0x1A0000 0x660000>; + }; + }; + +}; + #include "tps65910.dtsi" &tps { -- 2.7.0