The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: David Airlie <airlied@linux.ie>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	<dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Cawa Cheng <cawa.cheng@mediatek.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Bibby Hsieh <bibby.hsieh@mediatek.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	CK Hu <ck.hu@mediatek.com>, Mao Huang <littlecvr@chromium.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Sascha Hauer <kernel@pengutronix.de>,
	Junzhi Zhao <junzhi.zhao@mediatek.com>
Subject: [PATCH 3/4] drm/mediatek: fix the wrong pixel clock when resolution is 4K
Date: Wed, 20 Jul 2016 12:03:04 +0800	[thread overview]
Message-ID: <1468987385-37353-4-git-send-email-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <1468987385-37353-1-git-send-email-bibby.hsieh@mediatek.com>

From: Junzhi Zhao <junzhi.zhao@mediatek.com>

Pixel clock should be 297MHz when resolution is 4K.

Signed-off-by: Junzhi Zhao <junzhi.zhao@mediatek.com>
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c |  184 +++++++++++++++++++++++++-----------
 1 file changed, 131 insertions(+), 53 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d05ca79..c0f04d2 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -60,14 +60,35 @@ enum mtk_dpi_out_color_format {
 	MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
 };
 
+enum mtk_dpi_clk_id {
+	MTK_DPI_CLK_DPI_ENGINE,
+	MTK_DPI_CLK_DPI_PIXEL,
+	MTK_DPI_CLK_TVD_PLL,
+	MTK_DPI_CLK_TVDPLL_MUX,
+	MTK_DPI_CLK_TVDPLL_D2,
+	MTK_DPI_CLK_TVDPLL_D4,
+	MTK_DPI_CLK_TVDPLL_D8,
+	MTK_DPI_CLK_TVDPLL_D16,
+	MTK_DPI_CLK_COUNT,
+};
+
+static const char * const mtk_dpi_clk_names[MTK_DPI_CLK_COUNT] = {
+	[MTK_DPI_CLK_DPI_ENGINE] = "engine",
+	[MTK_DPI_CLK_DPI_PIXEL] = "pixel",
+	[MTK_DPI_CLK_TVD_PLL] = "pll",
+	[MTK_DPI_CLK_TVDPLL_MUX] = "tvdpll_mux",
+	[MTK_DPI_CLK_TVDPLL_D2] = "tvdpll_d2",
+	[MTK_DPI_CLK_TVDPLL_D4] = "tvdpll_d4",
+	[MTK_DPI_CLK_TVDPLL_D8] = "tvdpll_d8",
+	[MTK_DPI_CLK_TVDPLL_D16] = "tvdpll_d16",
+};
+
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
 	void __iomem *regs;
 	struct device *dev;
-	struct clk *engine_clk;
-	struct clk *pixel_clk;
-	struct clk *tvd_clk;
+	struct clk *clk[MTK_DPI_CLK_COUNT];
 	int irq;
 	struct drm_display_mode mode;
 	enum mtk_dpi_out_color_format color_format;
@@ -76,6 +97,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
 	u8 power_ctl;
+	void *data;
 };
 
 static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
@@ -114,6 +136,11 @@ struct mtk_dpi_yc_limit {
 	u16 c_bottom;
 };
 
+struct mtk_dpi_conf {
+	int (*parse_clk_from_dt)(struct mtk_dpi *dpi, struct device_node *np);
+	int (*clk_config)(struct mtk_dpi *dpi, struct drm_display_mode *mode);
+};
+
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
 {
 	u32 tmp = readl(dpi->regs + offset) & ~mask;
@@ -377,8 +404,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 		return;
 
 	mtk_dpi_disable(dpi);
-	clk_disable_unprepare(dpi->pixel_clk);
-	clk_disable_unprepare(dpi->engine_clk);
+	clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]);
+	clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]);
 	dpi->power_sta = false;
 }
 
@@ -395,13 +422,13 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	if (dpi->power_sta)
 		return 0;
 
-	ret = clk_prepare_enable(dpi->engine_clk);
+	ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]);
 	if (ret) {
 		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
 		goto err_eng;
 	}
 
-	ret = clk_prepare_enable(dpi->pixel_clk);
+	ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]);
 	if (ret) {
 		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
 		goto err_pixel;
@@ -412,7 +439,7 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	return 0;
 
 err_pixel:
-	clk_disable_unprepare(dpi->engine_clk);
+	clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_DPI_ENGINE]);
 err_eng:
 	dpi->power_ctl &= ~pctl;
 	return ret;
@@ -428,34 +455,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	struct mtk_dpi_sync_param vsync_leven = { 0 };
 	struct mtk_dpi_sync_param vsync_rodd = { 0 };
 	struct mtk_dpi_sync_param vsync_reven = { 0 };
-	unsigned long pix_rate;
-	unsigned long pll_rate;
-	unsigned int factor;
+	struct mtk_dpi_conf *conf;
+	int ret;
 
 	if (!dpi) {
 		dev_err(dpi->dev, "invalid argument\n");
 		return -EINVAL;
 	}
 
-	pix_rate = 1000UL * mode->clock;
-	if (mode->clock <= 74000)
-		factor = 8 * 3;
-	else
-		factor = 4 * 3;
-	pll_rate = pix_rate * factor;
-
-	dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n",
-		pll_rate, pix_rate);
-
-	clk_set_rate(dpi->tvd_clk, pll_rate);
-	pll_rate = clk_get_rate(dpi->tvd_clk);
-
-	pix_rate = pll_rate / factor;
-	clk_set_rate(dpi->pixel_clk, pix_rate);
-	pix_rate = clk_get_rate(dpi->pixel_clk);
-
-	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
-		pll_rate, pix_rate);
+	conf = (struct mtk_dpi_conf *)dpi->data;
+	ret = conf->clk_config(dpi, mode);
 
 	limit.c_bottom = 0x0010;
 	limit.c_top = 0x0FE0;
@@ -656,20 +665,109 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static int mt8173_parse_clk_from_dt(struct mtk_dpi *dpi, struct device_node *np)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mtk_dpi_clk_names); i++) {
+		dpi->clk[i] = of_clk_get_by_name(np,
+						  mtk_dpi_clk_names[i]);
+		if (IS_ERR(dpi->clk[i]))
+			return PTR_ERR(dpi->clk[i]);
+	}
+	return 0;
+}
+
+static int mt8173_clk_config(struct mtk_dpi *dpi, struct drm_display_mode *mode)
+{
+	unsigned long pix_rate;
+	unsigned long pll_rate;
+	unsigned int factor;
+	struct clk *parent;
+	int ret;
+
+	if (mode->clock <= 27000) {
+		factor = 16 * 3;
+		parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D16];
+	} else if (mode->clock <= 74250) {
+		factor = 8 * 3;
+		parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D8];
+	} else if (mode->clock <= 167000) {
+		factor = 4 * 3;
+		parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D4];
+	} else {
+		factor = 2 * 3;
+		parent = dpi->clk[MTK_DPI_CLK_TVDPLL_D2];
+	}
+
+	pix_rate = 1000UL * mode->clock;
+	pll_rate = pix_rate * factor;
+
+	dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n",
+		pll_rate, pix_rate);
+
+	ret = clk_prepare_enable(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]);
+	if (ret) {
+		dev_err(dpi->dev, "tvdpll_mux enable fail\n");
+		return ret;
+	}
+
+	ret = clk_set_parent(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX], parent);
+	if (ret) {
+		dev_err(dpi->dev, "tvdpll_mux set parent fail\n");
+		return ret;
+	}
+	clk_disable_unprepare(dpi->clk[MTK_DPI_CLK_TVDPLL_MUX]);
+
+	ret = clk_set_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL], pll_rate);
+	if (ret) {
+		dev_err(dpi->dev, "dpi pll_rate set rate fail\n");
+		return ret;
+	}
+	pll_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_TVD_PLL]);
+	pix_rate = clk_get_rate(dpi->clk[MTK_DPI_CLK_DPI_PIXEL]);
+
+	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
+		pll_rate, pix_rate);
+
+	return 0;
+}
+
+static const struct mtk_dpi_conf mt8173_conf = {
+	.parse_clk_from_dt = mt8173_parse_clk_from_dt,
+	.clk_config = mt8173_clk_config,
+};
+
+static const struct of_device_id mtk_dpi_of_ids[] = {
+	{ .compatible = "mediatek,mt8173-dpi",
+		.data = &mt8173_conf,
+	},
+	{}
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct mtk_dpi *dpi;
 	struct resource *mem;
+	struct device_node *np = dev->of_node;
 	struct device_node *ep, *bridge_node = NULL;
 	int comp_id;
+	const struct of_device_id *match;
+	struct mtk_dpi_conf *conf;
 	int ret;
 
+	match = of_match_node(mtk_dpi_of_ids, dev->of_node);
+	if (!match)
+		return -ENODEV;
+
 	dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL);
 	if (!dpi)
 		return -ENOMEM;
 
 	dpi->dev = dev;
+	dpi->data = (void *)match->data;
+	conf = (struct mtk_dpi_conf *)match->data;
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
@@ -679,24 +777,9 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	dpi->engine_clk = devm_clk_get(dev, "engine");
-	if (IS_ERR(dpi->engine_clk)) {
-		ret = PTR_ERR(dpi->engine_clk);
-		dev_err(dev, "Failed to get engine clock: %d\n", ret);
-		return ret;
-	}
-
-	dpi->pixel_clk = devm_clk_get(dev, "pixel");
-	if (IS_ERR(dpi->pixel_clk)) {
-		ret = PTR_ERR(dpi->pixel_clk);
-		dev_err(dev, "Failed to get pixel clock: %d\n", ret);
-		return ret;
-	}
-
-	dpi->tvd_clk = devm_clk_get(dev, "pll");
-	if (IS_ERR(dpi->tvd_clk)) {
-		ret = PTR_ERR(dpi->tvd_clk);
-		dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
+	ret = conf->parse_clk_from_dt(dpi, np);
+	if (ret) {
+		dev_err(dev, "parse tvd div clk failed!");
 		return ret;
 	}
 
@@ -754,11 +837,6 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mtk_dpi_of_ids[] = {
-	{ .compatible = "mediatek,mt8173-dpi", },
-	{}
-};
-
 struct platform_driver mtk_dpi_driver = {
 	.probe = mtk_dpi_probe,
 	.remove = mtk_dpi_remove,
-- 
1.7.9.5

  parent reply	other threads:[~2016-07-20  4:03 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-20  4:03 [PATCH 0/4] MT8173 HDMI 4K support Bibby Hsieh
2016-07-20  4:03 ` [PATCH 1/4] drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable Bibby Hsieh
2016-07-20  4:03 ` [PATCH 2/4] drm/mediatek: enhance the HDMI driving current Bibby Hsieh
2016-07-20  7:15   ` CK Hu
2016-07-25  6:15     ` Bibby Hsieh
2016-07-20  4:03 ` Bibby Hsieh [this message]
2016-07-20  7:57   ` [PATCH 3/4] drm/mediatek: fix the wrong pixel clock when resolution is 4K CK Hu
2016-07-25  6:24     ` Bibby Hsieh
2016-07-25  6:49       ` CK Hu
2016-07-25  8:37         ` Bibby Hsieh
2016-07-20  9:41   ` Philipp Zabel
2016-07-25  6:25     ` Bibby Hsieh
2016-07-20  4:03 ` [PATCH 4/4] drm/mediatek: adjust VENCPLL clock for 4K HDMI output Bibby Hsieh
2016-07-20  9:55   ` Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468987385-37353-4-git-send-email-bibby.hsieh@mediatek.com \
    --to=bibby.hsieh@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=cawa.cheng@mediatek.com \
    --cc=ck.hu@mediatek.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=djkurtz@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=junzhi.zhao@mediatek.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=littlecvr@chromium.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=yingjoe.chen@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox