From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Zhangfei Gao <zhangfei.gao@linaro.org>,
Jingoo Han <jg1.han@samsung.com>,
Krzysztof Kozlowski <k.kozlowski@samsung.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Mark Brown <broonie@kernel.org>, Andy Green <andy@warmcat.com>
Subject: [PATCH 5/7] k3dma: Fix memory handling with cyclic mode
Date: Wed, 20 Jul 2016 20:53:07 -0700 [thread overview]
Message-ID: <1469073189-9167-6-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <1469073189-9167-1-git-send-email-john.stultz@linaro.org>
With cyclic mode, the shared virt-dma logic doesn't actually
manage the descriptor state, nor the calling of the descriptor
free callback. This results in leaking a desc structure every
time we start an audio transfer.
Thus we must manage it ourselves. The k3dma driver already keeps
track of the active and finished descriptors via ds_run and ds_done
pointers, so when we tear down everything in terminate_all, call
free_desc on the ds_run and ds_done pointers if they are not null.
NOTE: HiKey doesn't use the non-cyclic dma modes, so I'm not been
able to test those modes. But with this patch we no longer leak
the desc structures.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Andy Green <andy@warmcat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
drivers/dma/k3dma.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index 8e4c845..950ed36 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -219,6 +219,7 @@ static irqreturn_t k3_dma_int_handler(int irq, void *dev_id)
spin_lock_irqsave(&c->vc.lock, flags);
vchan_cookie_complete(&p->ds_run->vd);
p->ds_done = p->ds_run;
+ p->ds_run = NULL;
spin_unlock_irqrestore(&c->vc.lock, flags);
}
if (c && (tc2 & BIT(i))) {
@@ -266,14 +267,14 @@ static int k3_dma_start_txd(struct k3_dma_chan *c)
* so vc->desc_issued only contains desc pending
*/
list_del(&ds->vd.node);
+
+ WARN_ON_ONCE(c->phy->ds_run);
+ WARN_ON_ONCE(c->phy->ds_done);
c->phy->ds_run = ds;
- c->phy->ds_done = NULL;
/* start dma */
k3_dma_set_desc(c->phy, &ds->desc_hw[0]);
return 0;
}
- c->phy->ds_done = NULL;
- c->phy->ds_run = NULL;
return -EAGAIN;
}
@@ -659,6 +660,15 @@ static int k3_dma_config(struct dma_chan *chan,
return 0;
}
+static void k3_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct k3_dma_desc_sw *ds =
+ container_of(vd, struct k3_dma_desc_sw, vd);
+
+ kfree(ds);
+}
+
+
static int k3_dma_terminate_all(struct dma_chan *chan)
{
struct k3_dma_chan *c = to_k3_chan(chan);
@@ -682,7 +692,15 @@ static int k3_dma_terminate_all(struct dma_chan *chan)
k3_dma_terminate_chan(p, d);
c->phy = NULL;
p->vchan = NULL;
- p->ds_run = p->ds_done = NULL;
+ if (p->ds_run) {
+ k3_dma_free_desc(&p->ds_run->vd);
+ p->ds_run = NULL;
+ }
+ if (p->ds_done) {
+ k3_dma_free_desc(&p->ds_done->vd);
+ p->ds_done = NULL;
+ }
+
}
spin_unlock_irqrestore(&c->vc.lock, flags);
vchan_dma_desc_free_list(&c->vc, &head);
@@ -735,14 +753,6 @@ static int k3_dma_transfer_resume(struct dma_chan *chan)
return 0;
}
-static void k3_dma_free_desc(struct virt_dma_desc *vd)
-{
- struct k3_dma_desc_sw *ds =
- container_of(vd, struct k3_dma_desc_sw, vd);
-
- kfree(ds);
-}
-
static const struct of_device_id k3_pdma_dt_ids[] = {
{ .compatible = "hisilicon,k3-dma-1.0", },
{}
--
1.9.1
next prev parent reply other threads:[~2016-07-21 3:54 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-21 3:53 [PATCH 0/7 v3] K3DMA fixes for HiKey HDMI audio John Stultz
2016-07-21 3:53 ` [PATCH 1/7] k3dma: Fix hisi burst clipping John Stultz
2016-07-24 7:25 ` Vinod Koul
2016-07-29 22:40 ` John Stultz
2016-08-04 13:08 ` Vinod Koul
2016-08-04 17:36 ` John Stultz
2016-08-05 3:36 ` Vinod Koul
2016-07-21 3:53 ` [PATCH 2/7] k3dma: Fix dma err offsets John Stultz
2016-07-21 3:53 ` [PATCH 3/7] k3dma: Fix "nobody cared" message seen on any error John Stultz
2016-07-21 3:53 ` [PATCH 4/7] k3dma: Add cyclic mode for audio John Stultz
2016-07-24 7:31 ` Vinod Koul
2016-07-29 22:38 ` John Stultz
2016-07-21 3:53 ` John Stultz [this message]
2016-07-21 3:53 ` [PATCH 6/7] k3dma: Fix occasional DMA ERR issue by using proper dma api John Stultz
2016-07-21 4:26 ` zhangfei
2016-07-21 5:22 ` John Stultz
2016-07-21 6:27 ` Andy Green
2016-07-21 10:40 ` Mark Brown
2016-07-21 13:12 ` Andy Green
2016-07-21 16:18 ` John Stultz
2016-07-21 19:57 ` Andy Green
2016-07-21 16:08 ` zhangfei
2016-07-21 3:53 ` [PATCH 7/7] Kconfig: Allow k3dma driver to be selected for more then HISI3xx platforms John Stultz
2016-07-22 6:56 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469073189-9167-6-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=andy@warmcat.com \
--cc=broonie@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=jg1.han@samsung.com \
--cc=k.kozlowski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=vinod.koul@intel.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).