From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S934939AbcHEJdY (ORCPT <rfc822;w@1wt.eu>);
	Fri, 5 Aug 2016 05:33:24 -0400
Received: from metis.ext.4.pengutronix.de ([92.198.50.35]:52208 "EHLO
	metis.ext.4.pengutronix.de" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S934901AbcHEJdX (ORCPT
	<rfc822;linux-kernel@vger.kernel.org>);
	Fri, 5 Aug 2016 05:33:23 -0400
Message-ID: <1470389590.3141.22.camel@pengutronix.de>
Subject: Re: [PATCH 1/1] imx53.dtsi: Add IPU nodes for csi
From: Philipp Zabel <p.zabel@pengutronix.de>
To: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Cc: Mark Rutland <mark.rutland@arm.com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
        Russell King <linux@armlinux.org.uk>,
        open list <linux-kernel@vger.kernel.org>,
        Rob Herring <robh+dt@kernel.org>, Sascha Hauer <kernel@pengutronix.de>,
        Fabio Estevam <fabio.estevam@nxp.com>, Shawn Guo <shawnguo@kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
	<linux-arm-kernel@lists.infradead.org>
Date: Fri, 05 Aug 2016 11:33:10 +0200
In-Reply-To: <1470318452-31391-1-git-send-email-fabien.lahoudere@collabora.co.uk>
References: <CAOMZO5BoRsrHv-+5c9bAXO2NCya8sPqmmpy9DOfav6NvQ+VMLQ@mail.gmail.com>
	 <1470318452-31391-1-git-send-email-fabien.lahoudere@collabora.co.uk>
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.12.9-1+b1 
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
X-SA-Exim-Connect-IP: 2001:67c:670:100:96de:80ff:fec2:9969
X-SA-Exim-Mail-From: p.zabel@pengutronix.de
X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false
X-PTX-Original-Recipient: linux-kernel@vger.kernel.org
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Am Donnerstag, den 04.08.2016, 15:47 +0200 schrieb Fabien Lahoudere:
> We have the following messages that tell csi devices are not used:
> imx-ipuv3 18000000.ipu: no port@0 node in /soc/ipu@18000000, not using CSI0
> imx-ipuv3 18000000.ipu: no port@1 node in /soc/ipu@18000000, not using CSI1
> 
> So we add them in the common device tree to make CSI ports available on
> imx53 boards.
> 
> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
> ---
>  arch/arm/boot/dts/imx53.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
> index c1bc97c..0777b41 100644
> --- a/arch/arm/boot/dts/imx53.dtsi
> +++ b/arch/arm/boot/dts/imx53.dtsi
> @@ -136,6 +136,14 @@
>  			clock-names = "bus", "di0", "di1";
>  			resets = <&src 2>;
>  
> +			ipu_csi0: port@0 {
> +				reg = <0>;
> +			};
> +
> +			ipu_csi1: port@1 {
> +				reg = <1>;
> +			};
> +
>  			ipu_di0: port@2 {
>  				#address-cells = <1>;
>  				#size-cells = <0>;

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp