From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752487AbcHUHRD (ORCPT ); Sun, 21 Aug 2016 03:17:03 -0400 Received: from plaes.org ([188.166.43.21]:42000 "EHLO plaes.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751121AbcHUHRC (ORCPT ); Sun, 21 Aug 2016 03:17:02 -0400 X-Greylist: delayed 900 seconds by postgrey-1.27 at vger.kernel.org; Sun, 21 Aug 2016 03:17:01 EDT Message-ID: <1471762285.581.1.camel@plaes.org> Subject: Re: [linux-sunxi] [PATCH 0/9] mfd: axp20x: Add support for AXP809 PMIC From: Priit Laes To: wens@csie.org, Lee Jones , Rob Herring , Mark Rutland , Liam Girdwood , Mark Brown , Maxime Ripard Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com Date: Sun, 21 Aug 2016 09:51:25 +0300 In-Reply-To: <20160821021125.1521-1-wens@csie.org> References: <20160821021125.1521-1-wens@csie.org> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.20.4 Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, 2016-08-21 at 10:11 +0800, Chen-Yu Tsai wrote: > Hi everyone, > > This series adds support for X-Powers' AXP806 PMIC. This is the > secondary > PMIC accompanying Allwinner's A80 SoC. For now, only the regulators > are > supported. While the AXP806 supports standalone operation, no > hardware > exists, so this will not be supported. Title says AXP809, but in text and in subsequent patches there's also 806/809 confusion. > > Patch 1 adds AXP806 to the axp20x bindings. > > Patch 2 adds AXP806 support to the axp20x mfd driver. > > Patch 3 fixes regulator output adjustment during regulator > registration > so it doesn't fail if the higher or lower bounds of its voltage > constraints > don't match up with the regulator's voltage granularity. > > Patch 4 adds AXP806 support to the axp20x regulator driver. > > Patch 5 adds the unused SW switch output of the AXP809 PMIC on the > A80 > Optimus board. This was accidentally left out of the AXP809 series. > > Patch 6 adds the unused SW switch output of the AXP809 PMIC on the > Cubieboard 4. This was accidentally left out of the AXP809 series. > > Patch 7 enables AXP809 support on the A80 Optimus board. > > Patch 8 enables AXP809 support on the Cubieboard 4. > > Patch 9 disables EHCI1 on the A80 Optimus board. > > > Regards > ChenYu > > Chen-Yu Tsai (9): >   mfd: axp20x: Add bindings for AXP806 PMIC >   mfd: axp20x: Add support for AXP806 PMIC >   regulator: core: Try full range when adjusting regulators to >     constraints >   regulator: axp20x: support AXP806 variant >   ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused >   ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused >   ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and >     regulators >   ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and >     regulators >   ARM: dts: sun9i: a80-optimus: Disable EHCI1 > >  Documentation/devicetree/bindings/mfd/axp20x.txt |  28 +++++- >  arch/arm/boot/dts/sun9i-a80-cubieboard4.dts      | 116 > +++++++++++++++++++++ >  arch/arm/boot/dts/sun9i-a80-optimus.dts          | 123 > ++++++++++++++++++++++- >  drivers/mfd/axp20x-rsb.c                         |   1 + >  drivers/mfd/axp20x.c                             |  72 +++++++++++++ >  drivers/regulator/axp20x-regulator.c             | 117 > +++++++++++++++++++-- >  drivers/regulator/core.c                         |   8 +- >  include/linux/mfd/axp20x.h                       |  60 +++++++++++ >  8 files changed, 508 insertions(+), 17 deletions(-) > > --  > 2.9.3 >