From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S1754788AbcIFAYQ (ORCPT <rfc822;w@1wt.eu>);
        Mon, 5 Sep 2016 20:24:16 -0400
Received: from mga02.intel.com ([134.134.136.20]:17518 "EHLO mga02.intel.com"
        rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
        id S1754572AbcIFAYO (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 5 Sep 2016 20:24:14 -0400
X-ExtLoop1: 1
X-IronPort-AV: E=Sophos;i="5.30,289,1470726000"; 
   d="scan'208";a="164759418"
Message-ID: <1473121447.2201.20.camel@intel.com>
Subject: Re: [PATCH v2 3/3] arm: dts: thermal: add thermal/auxadc node.
From: Zhang Rui <rui.zhang@intel.com>
To: Dawei Chien <dawei.chien@mediatek.com>,
        Eduardo Valentin <edubezval@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
        Mark Rutland <mark.rutland@arm.com>,
        Ian Campbell <ijc+devicetree@hellion.org.uk>,
        Kumar Gala <galak@codeaurora.org>,
        Russell King <linux@armlinux.org.uk>,
        Matthias Brugger <matthias.bgg@gmail.com>, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        linux-mediatek@lists.infradead.org, srv_heupstream@mediatek.com,
        Sascha Hauer <kernel@pengutronix.de>, Fan Chen <fan.chen@mediatek.com>,
        Eddie Huang <eddie.huang@mediatek.com>,
        Yingjoe Chen <yingjoe.chen@mediatek.com>,
        Erin Lo <erin.lo@mediatek.com>
Date: Tue, 06 Sep 2016 08:24:07 +0800
In-Reply-To: <1471492253-7185-4-git-send-email-dawei.chien@mediatek.com>
References: <1471492253-7185-1-git-send-email-dawei.chien@mediatek.com>
         <1471492253-7185-4-git-send-email-dawei.chien@mediatek.com>
Content-Type: text/plain; charset="UTF-8"
X-Mailer: Evolution 3.18.5.2-0ubuntu3 
Mime-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

On 四, 2016-08-18 at 11:50 +0800, Dawei Chien wrote:
> This adds the thermal controller and auxadc nodes
> to the Mediatek MT2701 dtsi file.
> 
> Signed-off-by: Dawei Chien <dawei.chien@mediatek.com>
> ---
> This patch depned on:
> https://patchwork.kernel.org/patch/9249589/
> https://patchwork.kernel.org/patch/9249589/

Hmm, does this mean that I should take all these three patches and hold
the patches in next merge window until the above patch has been merged?

thanks,
rui 
> ---
>  arch/arm/boot/dts/mt2701.dtsi |   44
> +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/mt2701.dtsi
> b/arch/arm/boot/dts/mt2701.dtsi
> index e9150a4..cee4724 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -87,6 +87,36 @@
>  		clock-output-names = "rtc32k";
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal: cpu_thermal {
> +			polling-delay-passive = <1000>; /*
> milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +
> +			thermal-sensors = <&thermal 0>;
> +			sustainable-power = <1000>;
> +
> +			trips {
> +				threshold: trip-point@0 {
> +					temperature = <68000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				target: trip-point@1 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu_crit@0 {
> +					temperature = <115000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv7-timer";
>  		interrupt-parent = <&gic>;
> @@ -222,4 +252,18 @@
>  		clock-names = "baud", "bus";
>  		status = "disabled";
>  	};
> +
> +	thermal: thermal@1100b000 {
> +		#thermal-sensor-cells = <0>;
> +		compatible = "mediatek,mt2701-thermal";
> +		reg = <0 0x1100b000 0 0x1000>;
> +		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_THERM>, <&pericfg
> CLK_PERI_AUXADC>;
> +		clock-names = "therm", "auxadc";
> +		resets = <&pericfg 0x10>;
> +		reset-names = "therm";
> +		mediatek,auxadc = <&auxadc>;
> +		mediatek,apmixedsys = <&apmixedsys>;
> +	};
> +
>  };