[PATCH 1/2] clocksource/drivers/moxart: Replace setup_irq by request_irq

[PATCH 1/2] clocksource/drivers/moxart: Replace setup_irq by request_irq

[Daniel Lezcano]

Save memory space and line of code by replacing setup_irq by request_irq.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/moxart_timer.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
index ad2bead9..cba25b7 100644
--- a/drivers/clocksource/moxart_timer.c
+++ b/drivers/clocksource/moxart_timer.c
@@ -79,7 +79,6 @@ struct moxart_timer {
 	unsigned int t1_enable_val;
 	unsigned int count_per_tick;
 	struct clock_event_device clkevt;
-	struct irqaction act;
 };
 
 static inline struct moxart_timer *to_moxart(struct clock_event_device *evt)
@@ -201,10 +200,6 @@ static int __init moxart_timer_init(struct device_node *node)
 	timer->clkevt.set_next_event = moxart_clkevt_next_event;
 	timer->clkevt.cpumask = cpumask_of(0);
 	timer->clkevt.irq = irq;
-	timer->act.name = node->name;
-	timer->act.flags = IRQF_TIMER;
-	timer->act.handler = moxart_timer_interrupt;
-	timer->act.dev_id = &timer->clkevt;
 
 	ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT,
 				    "moxart_timer", pclk, 200, 32,
@@ -214,7 +209,8 @@ static int __init moxart_timer_init(struct device_node *node)
 		return ret;
 	}
 
-	ret = setup_irq(irq, &timer->act);
+	ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER,
+			  node->name, &timer->clkevt);
 	if (ret) {
 		pr_err("%s: setup_irq failed\n", node->full_name);
 		return ret;
-- 
1.9.1

[PATCH 2/2] clocksource/drivers/moxart: Replace panic by pr_err

[Daniel Lezcano]

The clksrc-of code is supposed to catch the return code and fail gracefully.

Don't panic on error, but print the error and exit with a relevant error
code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/clocksource/moxart_timer.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
index cba25b7..2a8f470 100644
--- a/drivers/clocksource/moxart_timer.c
+++ b/drivers/clocksource/moxart_timer.c
@@ -184,8 +184,10 @@ static int __init moxart_timer_init(struct device_node *node)
 	} else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) {
 		timer->t1_enable_val = ASPEED_TIMER1_ENABLE;
 		timer->t1_disable_val = ASPEED_TIMER1_DISABLE;
-	} else
-		panic("%s: unknown platform\n", node->full_name);
+	} else {
+		pr_err("%s: unknown platform\n", node->full_name);
+		return -EINVAL;
+	}
 
 	timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
 
-- 
1.9.1

Re: [PATCH 2/2] clocksource/drivers/moxart: Replace panic by pr_err

[Joel Stanley]

On Thu, Sep 8, 2016 at 11:28 PM, Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
> The clksrc-of code is supposed to catch the return code and fail gracefully.
>
> Don't panic on error, but print the error and exit with a relevant error
> code.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Acked-by: Joel Stanley <joel@jms.id.au>

> ---
>  drivers/clocksource/moxart_timer.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
> index cba25b7..2a8f470 100644
> --- a/drivers/clocksource/moxart_timer.c
> +++ b/drivers/clocksource/moxart_timer.c
> @@ -184,8 +184,10 @@ static int __init moxart_timer_init(struct device_node *node)
>         } else if (of_device_is_compatible(node, "aspeed,ast2400-timer")) {
>                 timer->t1_enable_val = ASPEED_TIMER1_ENABLE;
>                 timer->t1_disable_val = ASPEED_TIMER1_DISABLE;
> -       } else
> -               panic("%s: unknown platform\n", node->full_name);
> +       } else {
> +               pr_err("%s: unknown platform\n", node->full_name);
> +               return -EINVAL;
> +       }
>
>         timer->count_per_tick = DIV_ROUND_CLOSEST(pclk, HZ);
>
> --
> 1.9.1
>

Re: [PATCH 1/2] clocksource/drivers/moxart: Replace setup_irq by request_irq

[Joel Stanley]

On Thu, Sep 8, 2016 at 11:28 PM, Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
> Save memory space and line of code by replacing setup_irq by request_irq.

Thanks. I also gave it a spin on our hardware to be sure.

> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Acked-by: Joel Stanley <joel@jms.id.au>

> ---
>  drivers/clocksource/moxart_timer.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clocksource/moxart_timer.c b/drivers/clocksource/moxart_timer.c
> index ad2bead9..cba25b7 100644
> --- a/drivers/clocksource/moxart_timer.c
> +++ b/drivers/clocksource/moxart_timer.c
> @@ -79,7 +79,6 @@ struct moxart_timer {
>         unsigned int t1_enable_val;
>         unsigned int count_per_tick;
>         struct clock_event_device clkevt;
> -       struct irqaction act;
>  };
>
>  static inline struct moxart_timer *to_moxart(struct clock_event_device *evt)
> @@ -201,10 +200,6 @@ static int __init moxart_timer_init(struct device_node *node)
>         timer->clkevt.set_next_event = moxart_clkevt_next_event;
>         timer->clkevt.cpumask = cpumask_of(0);
>         timer->clkevt.irq = irq;
> -       timer->act.name = node->name;
> -       timer->act.flags = IRQF_TIMER;
> -       timer->act.handler = moxart_timer_interrupt;
> -       timer->act.dev_id = &timer->clkevt;
>
>         ret = clocksource_mmio_init(timer->base + TIMER2_BASE + REG_COUNT,
>                                     "moxart_timer", pclk, 200, 32,
> @@ -214,7 +209,8 @@ static int __init moxart_timer_init(struct device_node *node)
>                 return ret;
>         }
>
> -       ret = setup_irq(irq, &timer->act);
> +       ret = request_irq(irq, moxart_timer_interrupt, IRQF_TIMER,
> +                         node->name, &timer->clkevt);
>         if (ret) {
>                 pr_err("%s: setup_irq failed\n", node->full_name);
>                 return ret;
> --
> 1.9.1
>